Other Clinical Trial - Evaluation of a Low-cost CPAP Device on

Status Completed

Clinical Trial Summary

The aim of this study is to evaluate the preliminary safety and performance of a low-cost locally-made Venturi-based Non-invasive Positive Pressure Ventilator (NIPPV) device for hypoxemic COVID-19 patients. The device administers Continuous Positive Airway Pressure (CPAP) therapy using the jet-mixing or Venturi effect to increase the volume flow rate of oxygenated air from a pressurized cylinder by entraining the atmospheric air. To provide CPAP therapy, this high flow of oxygenated air is delivered to the patient via a low-cost non-vented mask with a tight seal with a High-Efficiency Particulate Air (HEPA) filter connected to the exhalation limb. The tight seal and HEPA filter ensures a minimal risk of aerosol generation and thus the device can be used without a negative pressure room. The system consists of the developed Venturi-based flow-generator, a standard 22mm breathing tube, a standard Y-connector, a non-vented CPAP mask (e.g., snorkel mask, helmet), a HEPA filter, and a Positive End Expiratory Pressure (PEEP) valve. The bench-top testing of the device is done in the laboratories of BUET and was verified that the device performs within the CPAP guidelines provided by the Medicines and Healthcare products Regulatory Agency (MHRA), UK. This study aims to assess the safety of and efficacy of the device in three different steps: (1) design validation, (2) clinical feasibility and (3) pilot clinical trial for safety and efficacy evaluation. Only if the device successfully passes the parts 1 and 2, the investigators will proceed to the final clinical trial in step 3. In this final step, the investigators aim to conduct a randomized controlled trial (RCT) evaluating for non-inferiority of the CPAP intervention compared to standard HFNO treatment. The number of ventilator-free days will be used as the primary outcome for efficacy, while patient recovery, death, or need of intubation and other adverse events will be used as secondary outcomes.

Clinical Trial Description

n/a

Study Design

Related Conditions & MeSH terms

Clinical Trial Details

NCT number	NCT04681859
Study type	Interventional
Source	Bangladesh University of Engineering and Technology
Contact
Status	Completed
Phase	N/A
Start date	April 17, 2021
Completion date	August 9, 2021

View Details

See also
Status	Clinical Trial	Phase
Completed	`NCT05047692` - Safety and Immunogenicity Study of AdCLD-CoV19-1: A COVID-19 Preventive Vaccine in Healthy Volunteers	Phase 1
Recruiting	`NCT04395768` - International ALLIANCE Study of Therapies to Prevent Progression of COVID-19	Phase 2
Terminated	`NCT04555096` - A Trial of GC4419 in Patients With Critical Illness Due to COVID-19	Phase 2
Completed	`NCT04506268` - COVID-19 SAFE Enrollment	N/A
Completed	`NCT04508777` - COVID SAFE: COVID-19 Screening Assessment for Exposure
Completed	`NCT04961541` - Evaluation of the Safety and Immunogenicity of Influenza and COVID-19 Combination Vaccine	Phase 1/Phase 2
Active, not recruiting	`NCT04546737` - Study of Morphological, Spectral and Metabolic Manifestations of Neurological Complications in Covid-19 Patients	N/A
Terminated	`NCT04581915` - PHRU CoV01 A Trial of Triazavirin (TZV) for the Treatment of Mild-moderate COVID-19	Phase 2/Phase 3
Completed	`NCT04494646` - BARCONA: A Study of Effects of Bardoxolone Methyl in Participants With SARS-Corona Virus-2 (COVID-19)	Phase 2
Completed	`NCT04532294` - Safety, Tolerability, Pharmacokinetics, and Immunogenicity of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2/COVID-19) Neutralizing Antibody in Healthy Participants	Phase 1
Terminated	`NCT04542993` - Can SARS-CoV-2 Viral Load and COVID-19 Disease Severity be Reduced by Resveratrol-assisted Zinc Therapy	Phase 2
Not yet recruiting	`NCT04543006` - Persistence of Neutralizing Antibodies 6 and 12 Months After a Covid-19	N/A
Completed	`NCT04537663` - Prevention Of Respiratory Tract Infection And Covid-19 Through BCG Vaccination In Vulnerable Older Adults	Phase 4
Completed	`NCT04387292` - Ocular Sequelae of Patients Hospitalized for Respiratory Failure During the COVID-19 Epidemic	N/A
Completed	`NCT04507867` - Effect of a NSS to Reduce Complications in Patients With Covid-19 and Comorbidities in Stage III	N/A
Not yet recruiting	`NCT04527211` - Effectiveness and Safety of Ivermectin for the Prevention of Covid-19 Infection in Colombian Health Personnel	Phase 3
Not yet recruiting	`NCT05038449` - Study to Evaluate the Efficacy and Safety of Colchicine Tablets in Patients With COVID-19	N/A
Completed	`NCT04979858` - Reducing Spread of COVID-19 in a University Community Setting: Role of a Low-Cost Reusable Form-Fitting Fabric Mask	N/A
Completed	`NCT04610502` - Efficacy and Safety of Two Hyperimmune Equine Anti Sars-CoV-2 Serum in COVID-19 Patients	Phase 2
Active, not recruiting	`NCT06042855` - ACTIV-6: COVID-19 Study of Repurposed Medications - Arm G (Metformin)	Phase 3

Clinical trials are conducted in a series of steps, called phases - each phase is designed to answer a separate research question.

Phase 1: Researchers test a new drug or treatment in a small group of people for the first time to evaluate its safety, determine a safe dosage range, and identify side effects.
Phase 2: The drug or treatment is given to a larger group of people to see if it is effective and to further evaluate its safety.
Phase 3: The drug or treatment is given to large groups of people to confirm its effectiveness, monitor side effects, compare it to commonly used treatments, and collect information that will allow the drug or treatment to be used safely.
Phase 4: Studies are done after the drug or treatment has been marketed to gather information on the drug's effect in various populations and any side effects associated with long-term use.

Evaluation of a Low-cost CPAP Device on Hospitalized COVID-19 Patients — OxyJet-CPAP

Clinical Trial Summary

Clinical Trial Description

Study Design

Related Conditions & MeSH terms