Clinical Trial Details
— Status: Completed
Administrative data
NCT number |
NCT04278001 |
Other study ID # |
BLAST-AARHUS |
Secondary ID |
|
Status |
Completed |
Phase |
N/A
|
First received |
|
Last updated |
|
Start date |
September 1, 2018 |
Est. completion date |
February 1, 2020 |
Study information
Verified date |
September 2023 |
Source |
Central Jutland Regional Hospital |
Contact |
n/a |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
The SOMNOtouch NIBP is a cuffless device for continuous blood pressure measurement. The
device is widely used, but validation for 24-hour ambulatory blood pressure measurement
(ABPM) is limited. This study seeks to validate the SOMNOtouch device for use in 24-hour ABMP
as compared to a validated oscillometric device for 24-hour ABPM. A total of 60 patients with
indication for 24-hour BP measurement will be recruited from our tertiary hypertension
Clinic. All included patients will conduct dual 24-hour ABPM with both the SOMNOtouch NIBP
and a the oscillometric device. Furthermore, patients will undergo measurement of arterial
stiffness with a Sphygmocor device as well as complete a questionaire on device related
discomfort.
Description:
Recruitment of study participants:
A total of 60 patients with indication for 24-hour BP measurement will be recruited from our
tertiary hypertension clinic at Aarhus University Hospital, Aarhus, Denmark. Patients will be
eligible for inclusion if they are 18 years or older and have indication for ABPM with an
automated oscillometric device. Exclusion criteria will be as follows: Known significant
arterial abnormalities in the upper extremities, known cardiac arrythmia, upper arm
circumference >16,5" or <6", or extreme uncontrolled hypertension (i.e. resting office BP >
230/140 mmHg). To enable testing of the device at both normal and elevated BP-levels, we will
aim at including at least 15 patients in each of the following categories: Normal BP, stage 1
hypertension and stage ≥2, based on NICE guidelines for ABPM17. Informed consent will
obtained from all patients prior to inclusion in the study. At inclusion, a simultaneous
bilateral BP-measurement will be performed with three consecutive measurements using an
automated oscillometric device (Microlife WatchBP Office®) after 5 minutes of rest. If the
difference in Systolic Blood Pressure (SBP) between the arms is found to be >5 mmHg, the
patient will not be included in the study.
24-hour BP measurements: All staff related to the project are familiar with the SOMNOtouch
NIBP™ (SomBP) device, which has been used in our clinic for selected patients with high
cuff-based BP and at the same time symptoms of hypotension, since 2015. Mounting and
calibration of both devices will be conducted according to manufacturers' instructions. With
the patient sitting in an upright position with back-support, a conventional oscillometric
BP-device (Spacelabs 90217 / 90207, OscBP) will be fitted on the right arm, while the SomBP
will be fitted on the left arm. The SomBP will be calibrated with a single BP measurement
with a cuff-based sphygmomanometer. The OscBP will record BP three times every hour during
daytime and two times every hour during nighttime, while the SomBP will measure BP
continuously. The patients will be instructed to engage in normal activities but refrain from
strenuous exercise and, at the time of cuff-inflation, to stop moving and talking, while
keeping the arm still with the cuff at heart level. Pulse wave velocity (PWV) as well as
pulse wave analysis (PWA) will be performed in duplicate with the SphygmoCor system (version
8.2, Atcor Medical, Sydney, Australia). A small questionnaire on device-related pain and/or
discomfort as well as sleeping habits will be provided to all participants. As per ESH
guidelines, a minimum of 70% useful measurements on the oscillometric device during the ABPM
will be required for the data to be considered useful. Assessment the acceptability of
data-quality of SomBP will be made on the basis of discussion between the primary
investigator and KLC, who, at the time of evaluation will both be blinded to the
corresponding OscBP measurement. No SomBP measurements will be accepted with more than 50%
failed measurement in the report. Data from both devices will be excluded from the study if
data-collection from either device is deemed to have insufficient quality to be usable. For
these instances, patients will be asked to repeat examination with both devices. SomBP1 data
will extracted ad hoc using Domino Light 1.4.0 software.
Statistical analysis:
All statistical analysis will be performed using STATA software. A p-value of 0.05 will be
prespecified as statistically significant. Variables will be checked for distribution through
histograms and QQ-plots. Means will be compared using paired t-test. Standard regression
analysis will be performed to test for association in continuous variables. Categorical
variables will be compared using chi-squared tests.