Clinical Trial Details
— Status: Completed
Administrative data
NCT number |
NCT03475992 |
Other study ID # |
TN.32.1.17.SATF |
Secondary ID |
|
Status |
Completed |
Phase |
N/A
|
First received |
|
Last updated |
|
Start date |
October 10, 2018 |
Est. completion date |
May 7, 2020 |
Study information
Verified date |
May 2021 |
Source |
MVG Industries SAS |
Contact |
n/a |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
The trialed investigational medical imaging device is a low-power microwave breast imaging
system for cancer screening purposes. It is an active device which uses non-ionizing
radiation.
Microwave imaging is an emerging imaging modality for the early detection of the breast
cancer. The physical basis of microwave imaging is the dielectric contrast between healthy
and cancerous breast tissues at microwave frequencies. Microwave imaging can potentially be
used for monitoring neoadjuvant chemotherapy treatment, breast health monitoring, and for
routine screening and diagnosis of the breast cancer at the early-stage. The non-invasive and
the non-ionizing characteristics of microwaves should allow for frequent scans of the breast
using microwave imaging, unlike X-ray mammography. In addition to safety, microwave imaging
does not require uncomfortable breast compression and it is potentially a lower-cost
modality.
This is a first-in-human clinical test of the investigational device, which has been so far
tested only with experimental phantoms modelling the human female breast.
The clinical data that will be collected in the context of this study is intended to provide
early safety information for the investigational medical imaging device. In addition, this
exploratory data will guide the refinement of the device hardware and the imaging algorithm
design, before decision to proceed (or not) with further clinical tests.
Furthermore, this study will be used to guide sample size calculation for a subsequent study
designed to evaluate efficacy should that appear warranted once this study is completed.
Description:
This is a single-site early-phase pilot clinical study, taking place at Galway University
Hospital/HRB Clinical Research Facility, Galway.
Patients will have a conventional history and breast examinations (Mammogram and / or
Ultrasound and Clinical assessment) performed by the physician, as per normal practice in the
Symptomatic Breast Unit of University Hospital Galway.
If patients are interested in the study, provide written informed consent and are deemed
eligible, they will attend the Clinical Research Facility Galway for a Microwave Breast
Imaging (MBI) scan. The data from the scan will be collected and stored securely. Patients
will be followed up 7-21 days after the microwave breast investigation or before surgery,
whichever comes first. Patients will be assessed for their experience of the microwave breast
investigation, and for any adverse events.
The investigational medical imaging device consists of two subsystems, both performing a
non-invasive examination:
- the Microwave Breast Imaging subsystem (MBI subsystem);
- the Optical Breast Contour Detection subsystem (OBCD subsystem);
The MBI subsystem is an active device which uses non-ionizing radiation. It illuminates the
breast with low-power electromagnetic waves in the microwave frequency spectrum, which
penetrate the breast under examination. The subsystem collects the scattered electromagnetic
waves and recovers useful information on the breast tissue consistency, given the dielectric
contrast of these tissues.
Multi-static radar detection technology is employed in the MBI subsystem for breast image
formation.The well-established Microwave Vision Group (MVG) technology for fast antenna
measurement, using multiple sensors in a vertical arch configuration, has been transposed to
a horizontal arch of sensors. In addition, vertical translation of the horizontal arch has
been enabled, such that 3D multi-static short-range radar imaging is possible.
The sensors are in contact with a cylindrical container filled with a liquid; the so-called
coupling liquid has been designed to have electromagnetic (EM) properties appropriately
selected such that the EM wave penetration in the breast is maximized.
During the MBI scan, the patient is lying in a face down position on a special bed,
integrated with the MBI subsystem. The breast under examination is immersed in the coupling
liquid, through a dedicated circular opening of the bed. The breast is then scanned. This
vertical scan takes approximately 10-15 minutes to complete, depending on the size of each
breast.
In order to compute the required volume of coupling liquid, such that the container of the
MBI subsystem is optimally filled after immersion of the breast, a simple process for optical
assessment of the total volume of the breast takes place just before starting the MBI scan.
The Optical Breast Contour Detection (OBCD) subsystem serves to provide the total volume of
the breast, and also its external contour, as a priori information to the MBI subsystem. The
OBCD subsystem consists of a 3D optical camera placed below the examination table, at a
distance of several tens of centimetres below the breast. An azimuthal scan of the 3D camera
permits to reconstruct the external surface of the breast.
In order for the breast contour to be a useful a priori information for the MBI subsystem, it
is important that the patient is lying in the same face down position during both the MBI and
OBCD scans. Thus, an identical examination table, as the one integrated with the MBI
subsystem, is also integrated with the OBCD subsystem. During the OBCD scan, the patient is
lying on the examination table, with her breast under examination inserted in the circular
opening of the examination table. For this scan, there is no coupling liquid; the breast is
in the air, hanging below the examination table.
Both the breast bearing the palpable lump and the contralateral breast will be scanned. The
contralateral breast scan will serve as control in the data analysis.
The MBI scan duration of each breast should not exceed 15 minutes. The recorded data will be
checked and in the case of non-optimal positioning of the patient, the scan may be repeated.
It is expected that the duration of the microwave breast investigation (including OBCD scan
of both breasts for breast volume assessment, preparation of the MBI subsystem, MBI scan of
both breasts, and data verification) should not exceed 1 hour. If the Data Quality Check
suggests repetition of the MBI scan, and upon agreement by the patient, the total duration of
the microwave breast investigation will be extended.
The written radiology reports from conventional imaging will be acquired and used to evaluate
the performance of the MBI subsystem in terms of detecting and estimating the size and
consistency of the breast lump.
MBI data analysis will be performed off-line, at MVG premises (France), and is expected to be
completed few months after the end-date of data collection. Following the assessment of the
MBI results by the medical experts involved in the study, a decision will be made regarding
the potential of this emerging imaging modality and the interest in proceeding with clinical
studies involving larger sample sizes. Based on these results, MVG will decide and plan
actions for refinement of the system, towards an upgraded version to be used for potential
future tests with a more significant impact.