Switching Study From Warfarin to Rivaroxaban

Venous Thrombosis Clinical Trial

Official title:

Randomized, Placebo-controlled, Parallel-group Study in Healthy Male Subjects to Investigate the Pharmacodynamics During the Switching Procedure From Warfarin to Rivaroxaban

Clinical Trial Details — Status: Completed

Administrative data

• NCT number: NCT01507051
• Other study ID #: 10849
• Secondary ID: 2008-005540-16
• Status: Completed
• Phase: Phase 1
• First received: December 5, 2011
• Last updated: January 26, 2015
• Start date: November 2008
• Est. completion date: November 2009

Study information

• Verified date: January 2015
• Source: Bayer
• Contact: n/a
• Is FDA regulated: No
• Health authority: Germany: Federal Institute for Drugs and Medical Devices
• Study type: Interventional

Clinical Trial Summary

The study objective is to investigate the pharmacodynamics (effects of a drug product) when switching the treatment from warfarin to rivaroxaban.

84 young, healthy subjects will participate; they will be treated following a randomized, parallel-group (Treatments A, B, and C), placebo-controlled (Treatment B), and single-blind (Treatments A and B) design.

The first two groups (A, B) will receive warfarin for approximately one week to adjust their blood coagulation values to a specific level, i.e. to maintain an INR (international normalized ratio) of 2.0 - 3.0. This range is commonly used for long-term anticoagulant treatment.

The first group (A) will receive rivaroxaban for four days, the second group (B) will take placebo. On the last day, all subjects in groups A and B will receive vitamin K to neutralize the effects of warfarin. The third group (C) will not undergo prior treatment with warfarin but will receive rivaroxaban for four days.

Recruitment information / eligibility

• Status: Completed
• Enrollment: 96
• Est. completion date: November 2009
• Est. primary completion date: November 2009
• Accepts healthy volunteers: Accepts Healthy Volunteers
• Gender: Male
• Age group: 18 Years to 45 Years

Eligibility

Inclusion Criteria:

• 18 to 45 years of age;

• Normal body weight: BMI (body mass index) between 18 and 29 kg/m2;

• Pharmacogenetics: subjects who are homozygous for the wildtype allele 2C9*1 and who are carriers of the C-allele at positions 6484 and 7566 of the VKORC1 (vitamin K epoxide reductase) gene, respectively

Exclusion Criteria:

• Relevant deviation from the normal range in the clinical examination;

• Relevant deviation from the normal range in clinical chemistry, hematology or urinalysis;

• Resting heart rate in the awake subject below 45 BPM (beats per minute) or above 90 BPM;

• Systolic blood pressure below 100 mmHg or above 140 mmHg; and Diastolic blood pressure above 85 mmHg;

• Relevant pathological changes in the ECG (electrocardiogram) such as a second or third-degree AV block, prolongation of the QRS (QRS complex in ECG) complex over 120 msec or of the QT / QTc-interval over 450 msec (QT interval in ECG, QTc interval corrected for heart rate);

• Subject is tested to be HIV-1/2Ab, p24Ag, HbsAg or HCV-Ab positive;

• Known coagulation disorders (e.g. von Willebrand's disease, haemophiliac);

• Known disorders with increased bleeding risks (e.g. periodontosis, hemorrhoids, acute gastritis, peptic ulcer);

• Known sensitivity to common causes of bleeding (e.g. nasal);

• Recent or planned surgical or diagnostic procedures at the central nervous system (CNS) or eye;

• Subjects with hyperlipidemia (Coumadin / warfarin warning)

Study Design

Allocation: Randomized, Endpoint Classification: Pharmacodynamics Study, Intervention Model: Parallel Assignment, Masking: Single Blind (Subject)

Related Conditions & MeSH terms

• Thrombosis
• Venous Thrombosis

Intervention

Drug:
• Warfarin (Coumadin)
Days -6 and -5: 10 mg warfarin (Coumadin) once daily, dosage lower if the INR is already high on day -5; Days -4 to -1 (could be prolonged by two days): 2.5, 5, 10, 12.5 or 15 mg warfarin (Coumadin) once daily, dosage depending on INR
• Rivaroxaban (Xarelto, BAY59-7939)
Days 0 to 3: 20 mg rivaroxaban once daily
• Placebo
Days 0 to 3: 1 tablet placebo, identical to active tablet
• Vitamin K (Konakion)
Day 5: 10 mg vitamin K (Konakion) once daily

Locations

Country	Name	City	State
n/a

Sponsors (2)

Lead Sponsor	Collaborator
Bayer	Johnson & Johnson Pharmaceutical Research & Development, L.L.C.

Country where clinical trial is conducted

Germany, 

References & Publications (1)

Kubitza D, Becka M, Mück W, Krätzschmar J. Pharmacodynamics and pharmacokinetics during the transition from warfarin to rivaroxaban: a randomized study in healthy subjects. Br J Clin Pharmacol. 2014 Aug;78(2):353-63. doi: 10.1111/bcp.12349. — View Citation

Outcome

Type	Measure	Description	Time frame	Safety issue
Primary	Emax (Maximum Effect) on Prothrombin Time (PT) (Coagulation Test)	Prothrombin time (PT) is a global clotting test assessing the extrinsic pathway of the blood coagulation cascade. The test is sensitive for deficiencies of Factors II, V, VII, and X, with sensitivity being best for Factors V, VII, and X and less pronounced for Factor II. The initial read-out is in seconds. Higher values than the baseline indicate anticoagulant effects. Emax on PT was measured as the ratio of maximum PT (measured in seconds) divided by PT (measured in seconds) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Primary	Emax,BA (Baseline Adjusted Maximum Effect) on Prothrombin Time (Coagulation Test)	Prothrombin time (PT) is a global clotting test assessing the extrinsic pathway of the blood coagulation cascade. The test is sensitive for deficiencies of Factors II, V, VII, and X, with sensitivity being best for Factors V, VII, and X and less pronounced for Factor II. The initial read-out is in seconds. Higher values than the baseline indicate anticoagulant effects. Emax,BA on PT was measured as maximum PT (measured in seconds) minus PT (measured in seconds) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of Prothrombin Time (Coagulation Test)	Prothrombin time (PT) is a global clotting test assessing the extrinsic pathway of the blood coagulation cascade. The test is sensitive for deficiencies of Factors II, V, VII, and X, with sensitivity being best for Factors V, VII, and X and less pronounced for Factor II. The initial read-out is in seconds. Higher values than the baseline indicate anticoagulant effects. AUC(0-tn) of PT was the area under the measurement (PT [measured in seconds] at different time-points divided by PT [measured in seconds] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUCBA(0-tn) (Baseline Adjusted Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of Prothrombin Time (Coagulation Test)	Prothrombin time (PT) is a global clotting test assessing the extrinsic pathway of the blood coagulation cascade. The test is sensitive for deficiencies of Factors II, V, VII, and X, with sensitivity being best for Factors V, VII, and X and less pronounced for Factor II. The initial read-out is in seconds. Higher values than the baseline indicate anticoagulant effects. AUCBA(0-tn) of PT was the area under the measurement (PT [measured in seconds] at different time-points minus PT [measured in seconds] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax on PT (Measured as INR=International Normalized Ratio)	Prothrombin time - INR measured in seconds that is calculated as INR which is a correction for PT assay differences and an optimization to measure vitamin K antagonists. Higher values than the baseline indicate anticoagulant effects. Emax on PT (INR) was measured as the ratio of maximum INR divided by baseline INR.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) for PT (Measured as INR=International Normalized Ratio)	Prothrombin time - INR measured in seconds that is calculated as INR which is a correction for PT assay differences and an optimization to measure vitamin K antagonists. Higher values than the baseline indicate anticoagulant effects. AUC(0-tn) of PT (INR) was the area under the measurement (PT measured as INR at different time-points divided by PT measured as INR at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax on Factor Xa Activity	Test to measure the activity of endogenous Factor Xa. Emax on Factor Xa activity was calculated as 100*(Factor Xa activity at baseline [measured as activity per mL] - minimum of Factor Xa activity [measured as activity per mL]) / Factor Xa activity at baseline [measured as activity per mL].	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Inverse Measurement Versus Time Curve From Time 0 to the Last Data Point) of Factor Xa Activity	Test to measure the activity of endogenous Factor Xa. AUC(0-tn) of Factor Xa activity was the area under the inverse measurement [100*(Factor Xa activity at baseline (measured as activity per mL) - Factor Xa activity (measured as activity per mL) at different time-points) / Factor Xa activity at baseline (measured as activity per mL)] versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on Anti-Factor Xa Activity	This is a method for measuring the inhibition of Factor Xa activity determined by an ex vivo using a photometric method. Higher Values than the baseline indicate a more pronounced inhibition. Emax on anti-Factor Xa activity was measured as the ratio of maximum anti-Factor Xa activity (measured in U/L) divided by anti-Factor Xa activity (measured in U/L) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of Anti-Factor Xa Activity	This is a method for measuring the inhibition of Factor Xa activity determined by an ex vivo using a photometric method. Higher Values than the baseline indicate a more pronounced inhibition. AUC(0-tn) of anti-Factor Xa activity was the area under the measurement (anti-Factor Xa activity [measured in U/L] at different time-points divided by anti-Factor Xa activity [measured in U/L] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on aPTT (Activated Partial Thromboplastin Time)	The aPTT is a screening test for the intrinsic pathway and is sensitive for deficiencies of Factors I, II, V, VIII, IX, X, XI and XII. Higher values than the baseline indicate anticoagulant effects. Emax on aPTT was measured as the ratio of maximum aPTT (measured in seconds) divided by aPTT (measured in seconds) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of aPTT (Activated Partial Thromboplastin Time)	The aPTT is a screening test for the intrinsic pathway and is sensitive for deficiencies of Factors I, II, V, VIII, IX, X, XI and XII. Higher values than the baseline indicate anticoagulant effects. AUC(0-tn) of aPTT was the area under the measurement (aPTT [measured in seconds] at different time-points divided by aPTT [measured in seconds] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on HepTest (Coagulation Test)	This coagulation test was developed to monitor heparin and especially low-molecular weight heparins (LMWH). It is sensitive to measure Factor X. Higher values than the baseline indicate anticoagulant effects. Emax on HepTest was measured as the ratio of maximum HepTest (measured in seconds) divided by HepTest (measured in seconds) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of HepTest (Coagulation Test)	This coagulation test was developed to monitor heparin and especially low-molecular weight heparins (LMWH). It is sensitive to measure Factor X. Higher values than the baseline indicate anticoagulant effects. AUC(0-tn) of HepTest was the area under the measurement (HepTest [measured in seconds] at different time-points divided by HepTest [measured in seconds] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on PiCT (Prothrombinase-induced Clotting Time)	This coagulation test can be adapted to measure different anticoagulants, including inhibitors of Factor X. Higher values than the baseline indicate anticoagulant effects. Emax on PiCT was measured as the ratio of maximum PiCT (measured in seconds) divided by PiCT (measured in seconds) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of PiCT (Prothrombinase-induced Clotting Time)	This coagulation test can be adapted to measure different anticoagulants, including inhibitors of Factor X. Higher values than the baseline indicate anticoagulant effects. AUC(0-tn) of PiCT was the area under the measurement (PiCT [measured in seconds] at different time-points divided by PiCT [measured in seconds] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on ETP (Endogenous Thrombin Potential) AUC	ETP AUC assesses the overall function of the clotting cascade. The AUC assesses the overall ability to generate thrombin. Decreasing values compared to baseline indicate an anticoagulant effect. Emax on ETP AUC was measured as the ratio of ETP AUC (measured in nm*min as integral of fluorescence measurements) at baseline divided by minimum ETP AUC (measured in nm*min as integral of fluorescence measurements).	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of ETP (Endogenous Thrombin Potential) AUC	ETP AUC assesses the overall function of the clotting cascade. The AUC assesses the overall ability to generate thrombin. Decreasing values compared to baseline indicate an anticoagulant effect. AUC(0-tn) of ETP AUC was the area under the measurement (ETP AUC [measured in nm*min as integral of fluorescence measurements] at baseline divided by ETP AUC [measured in nm*min as integral of fluorescence measurements] at different time-points) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on ETP (Endogenous Thrombin Potential) Lag Time	ETP lag time assesses the overall function of the clotting cascade. The lag time assesses the time required until thrombin is generated. Increasing values compared to baseline indicate an anticoagulant effect. Emax on ETP lag time was measured as the ratio of maximum ETP lag time (in minutes as measure for the start of coagulation) divided by ETP lag time (in minutes as measure for the start of coagulation) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of ETP (Endogenous Thrombin Potential) Lag Time	ETP lag time assesses the overall function of the clotting cascade. The lag time assesses the time required until thrombin is generated. Increasing values compared to baseline indicate an anticoagulant effect. AUC(0-tn) of ETP lag time was the area under the measurement (ETP lag time [in minutes as measure for the start of coagulation] at different time-points divided by ETP lag time [in minutes as measure for the start of coagulation] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on ETP (Endogenous Thrombin Potential) Peak	ETP peak assesses the overall function of the clotting cascade. The peak assesses the overall maximal ability to generate thrombin. Decreasing values compared to baseline indicate an anticoagulant effect. Emax on ETP peak was measured as the ratio of ETP peak (measured in nm as maximum coagulation activity) at baseline divided by minimum ETP peak (measured in nm as maximum coagulation activity).	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of ETP (Endogenous Thrombin Potential) Peak	ETP peak assesses the overall function of the clotting cascade. The peak assesses the overall maximal ability to generate thrombin. Decreasing values compared to baseline indicate an anticoagulant effect. AUC(0-tn) of ETP peak was the area under the measurement (ETP peak [measured in nm as maximum coagulation activity] at baseline divided by ETP peak measured [in nm as maximum coagulation activity] at different time-points) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on ETP (Endogenous Thrombin Potential) Peak Time	ETP peak time assesses the overall function of the clotting cascade. The peak time assesses the time required to reach the maximal thrombin generation. Increasing values compared to baseline indicate an anticoagulant effect. Emax on ETP peak time was measured as the ratio of maximum ETP peak time (measured in minutes as time to reach the maximum coagulation activity) divided by ETP peak time (measured in minutes as time to reach the maximum coagulation activity) at baseline.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of ETP (Endogenous Thrombin Potential) Peak Time	ETP peak time assesses the overall function of the clotting cascade. The peak time assesses the time required to reach the maximal thrombin generation. Increasing values compared to baseline indicate an anticoagulant effect. AUC(0-tn) of ETP peak time was the area under the measurement (ETP peak time [measured in minutes as time to reach the maximum coagulation activity] at different time-points divided by ETP peak time [measured in minutes as time to reach the maximum coagulation activity] at baseline) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on Factor VIIa Activity	Factor VII is a coagulation factor that is required for the coagulation process. Emax on Factor VIIa activity was measured as the ratio of Factor VIIa activity (measured as percent of actual Factor VIIa activity compared to Factor VIIa activity in reference plasma) at baseline divided by minimum Factor VIIa activity (measured as percent of actual Factor VIIa activity compared to Factor VIIa activity in reference plasma).	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of Factor VIIa Activity	Factor VII is a coagulation factor that is required for the coagulation process. AUC(0-tn) of Factor VIIa activity was the area under the measurement (Factor VIIa activity [measured as percent of actual Factor VIIa activity compared to Factor VIIa activity in reference plasma] at baseline divided by Factor VIIa activity [measured as percent of actual Factor VIIa activity compared to Factor VIIa activity in reference plasma] at different time-points) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Emax (Maximum Effect) on Factor IIa Activity	Factor II (Thrombin) is a coagulation factor that is required for the coagulation process. Emax on Factor IIa activity was measured as the ratio of Factor IIa activity (measured as percent of actual Factor IIa activity compared to Factor IIa activity in reference plasma) at baseline divided by minimum Factor IIa activity (measured as percent of actual Factor IIa activity compared to Factor IIa activity in reference plasma).	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	AUC(0-tn) (Area Under the Measurement Versus Time Curve From Time 0 to the Last Data Point) of Factor IIa Activity	Factor II (Thrombin) is a coagulation factor that is required for the coagulation process. AUC(0-tn) of Factor IIa activity was the area under the measurement (Factor IIa activity [measured as percent of actual Factor IIa activity compared to Factor IIa activity in reference plasma] at baseline divided by Factor IIa activity [measured as percent of actual Factor IIa activity compared to Factor IIa activity in reference plasma] at different time-points) versus time curve from time 0 to the last data point.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban or placebo	No
Secondary	Area Under the Plasma Concentration Versus Time Curve From Time 0 to 24 Hours [AUC(0-24)] of Rivaroxaban After First Dose	The AUC is a measure of systemic drug exposure which is obtained by collecting a series of blood samples and measuring the concentrations of drug in each sample ([AUC(0-24)] is defined as area under the concentration vs. time curve from zero to 24 hours after first (single) dose).	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban	No
Secondary	Maximum Drug Concentration in Plasma (Cmax) of Rivaroxaban After First Dose	Cmax refers to the highest measured drug concentration which is obtained by collecting a series of blood samples and measuring the concentrations of drug in each sample.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban	No
Secondary	Half Life Associated With Terminal Slope (t1/2) of R-warfarin After the Last Dose of Warfarin	Half-life refers to the elimination of the drug, i.e. the time it takes for the blood plasma concentration to reach half the concentration in the terminal phase of elimination.	Blood samples taken at 24, 30, 48, 54, 72, 96, and 120 h after the last administration of warfarin	No
Secondary	Half Life Associated With Terminal Slope (t1/2) of S-warfarin After the Last Dose of Warfarin	Half-life refers to the elimination of the drug, i.e. the time it takes for the blood plasma concentration to reach half the concentration in the terminal phase of elimination.	Blood samples taken at 24, 30, 48, 54, 72, 96, and 120 h after the last administration of warfarin	No
Secondary	Area Under the Plasma Concentration Versus Time Curve From Time 0 to 24 Hours Divided by Dose Per kg Body Weight [AUC(0-24)Norm] of Rivaroxaban After First Dose	The AUC is a measure of systemic drug exposure, which is obtained by collecting a series of blood samples and measuring the concentrations of drug in each sample; [AUC(0-24)norm] is defined as AUC divided by dose per kg body weight from zero to 24 hours after first (single) dose.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban	No
Secondary	Maximum Drug Concentration in Plasma Divided by Dose Per kg Body Weight (Cmax,Norm) of Rivaroxaban After First Dose	Cmax refers to the highest measured drug concentration which is obtained by collecting a series of blood samples and measuring the concentrations of drug in each sample; Cmax,norm is defined as Cmax divided by dose (mg) per kg body weight.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban	No
Secondary	Time to Reach Maximum Drug Concentration in Plasma (Tmax) of Rivaroxaban After First Dose	Tmax refers to the time after dosing when a drug attains its highest measurable concentration (Cmax). It is obtained by collecting a series of blood samples at various times after dosing, and measuring them for drug content.	0 (predose), 1, 2, 3, 4, 6, 8, 12, and 24 h after first administration of rivaroxaban	No
Secondary	Drug Concentration in Plasma at Expected Time of Maximum (Peak) Concentration (Cpeak) of Rivaroxaban After Second to Fourth Dose	Cpeak refers to the time after dosing when the drug concentration is expected to reach its maximum (peak) concentration.	Always 3 h after second, third, and fourth dose	No
Secondary	Drug Concentration in Plasma at Expected Time of Minimum (Trough) Concentration (Ctrough) of Rivaroxaban After Second to Fourth Dose	Ctrough refers to the time after dosing when the drug concentration is expected to reach its minimum (trough) concentration.	Always 24 h after the second, third, and fourth dose	No
Secondary	Half Life Associated With Terminal Slope (t1/2) of Rivaroxaban After Last Dose	Half-life refers to the elimination of the drug, i.e. the time it takes for the blood plasma concentration to reach half the concentration in the terminal phase of elimination.	3, 24, 48, and 72 h after the last administration of rivaroxaban	No
Secondary	Drug Concentration in Plasma at Steady State at Expected Time of Minimum (Trough) Concentration (Ctrough,ss) of R-warfarin After the Last Dose of Warfarin	Ctrough,ss refers to the drug concentration at steady state at the time when it is expected to reach its minimum (trough) concentration.	0 h (predose) and 24 h after the last administration of warfarin	No
Secondary	Drug Concentration in Plasma at Steady State at Expected Time of Minimum (Trough) Concentration, Normalized by Dose (Ctrough,ss/D) of R-warfarin After the Last Dose of Warfarin	Ctrough,ss/D refers to the drug concentration at steady state at the time when it is expected to reach its minimum (trough) concentration, normalized by dose.	0 h (predose) and 24 h after the last administration of warfarin	No
Secondary	Drug Concentration in Plasma at Steady State at Expected Time of Minimum (Trough) Concentration (Ctrough,ss) of S-warfarin After the Last Dose of Warfarin	Ctrough,ss refers to the drug concentration at steady state at the time when it is expected to reach its minimum (trough) concentration.	0 h (predose) and 24 h after the last administration of warfarin	No
Secondary	Drug Concentration in Plasma at Steady State at Expected Time of Minimum (Trough) Concentration, Normalized by Dose (Ctrough,ss/D) of S-warfarin After the Last Dose of Warfarin	Ctrough,ss/D refers to the drug concentration at steady state at the time when it is expected to reach its minimum (trough) concentration, normalized by dose.	0 h (predose) and 24 h after the last administration of warfarin	No

External Links

•   Click here and search for drug information provided by the FDA.
•   Click here and search for information on any recalls, market or product safety alerts by the FDA which might have occurred with this product.
•   Click here and search for results posted for EMA
•   Click here to find results for studies related to Bayer Healthcare products.