Outcome
Type |
Measure |
Description |
Time frame |
Safety issue |
Other |
An assessment of cognitive state using The abbreviated mental test score (AMTS) |
The Abbreviated Mental Test Score (AMTS) is a tool designed for the assessment of cognitive functions, such as episodic memory, semantic memory and working memory, to screen for potential problems in cognitive functioning. AMTS is a 10-item questionnaire comprising questions and simple tasks for the patient. It takes only several minutes to perform, is simple, and no professional knowledge or equipment are needed. |
at baseline, immediately after treatment completion |
|
Other |
An assessment of anxiety and depression using Hospital Anxiety and Depression Scale (HADS) |
The questionnaire comprises seven questions for anxiety and seven questions for depression, and takes 2-5min to complete. Although the anxiety and depression questions are interspersed within the questionnaire, it is vital that these are scored separately. Cut-off scores are available for quantification, for both scales, scores of less than 7 indicate non-cases. |
at baseline, immediately after treatment completion |
|
Primary |
An assessment of static and dynamic balance using Berg Balance Scale (BBS) |
Assessment of static and dynamic balance based on 14 types of movement in the standing and sitting position of the patient. Each task of the test is scored using a four-point scale. A maximum score of 56 points is possible. Patients with a score below 20 pts indicate high risk of fall and the need of using wheelchairs. |
at baseline, immediately after treatment |
|
Primary |
An assessment of locomotor stages after Spinal Cord Injury using LOSSCI Scale |
The LOSSCI is a five-stage scale result of applying and adapting to spinal cord injury the original Vojta's 10 specific locomotor stages. Each LOSSCI stage should be evaluated in ascending order and the grading is determined by the highest stage the person can accomplish: orienting to and touching or grasping an object in supine position, trunk uprighting in prone position, creeping, crawling or walking support for the upper limbs, independent bipedal locomotion. The person's highest stage is reached when at least one item in a stage is achieved. |
at baseline, immediately after treatment completion |
|
Primary |
An assessment of trunk movement using The Trunk Control Test for Motor Impairment After Stroke (TCT) |
The TCT examines four axial movements: rolling from a supine position to the weak side and to the strong side, sitting up from a lying-down position, and sitting in a balanced position on the edge of the bed with feet off the ground for 30 seconds. The scoring is as follows: 0, unable to perform movement without assistance; 12, able to perform movement but in an abnormal manner; and 25, able to complete movement normally. The TCT score is the sum of the scores obtained on the four tests (range, 0 to 100). |
at baseline, immediately after treatment completion |
|
Primary |
An assessment of fall risk using Timed Up and Go Test (TUG) |
Measurement of the time in seconds for a person to rise from sitting from a standard arm chair, walk 3 meters, turn, walk back to the chair, and sit down. |
at baseline, immediately after treatment completion |
|
Primary |
An assessment of motor capacities of the upper limb, according to Fugl-Meyer Motor Assessment Scale |
Fugl-Meyer Motor Assessment Scale for Upper Extremity is a comprehensive tool enabling measurement of motor function; it comprises 33 motor tasks, designed to assess general movements, precision movements, grip, coordination and speed. It is also possible to perform H subgroup tests - assessing superficial and deep sensibility, and J subgroup tests - for range of passive motion and pain induced by such movements. Individual tasks are assessed on a scale 0-2 0 - impossible task. The higher the score, the better. |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of muscle tone using modified Tardieu Scale |
The scale takes into account the tension depending on the bending speed of the limb. It includes an assessment of the extent of passive motion when a muscle is stretched at a very slow pace, an assessment of the quality of the muscle's response during rapid stretching, and a measurement of the angle at which the muscle first responds to overactive stretching. |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of the parameters describing the center of pressure of the feet for measurements with eyes open and closed carried out on the stabilometric platform ALFA |
The balance will be conducted using the Alfa platform. The board platform will be set up in parallel, 2 m from the walls of the room, where a tag will be placed to focus vision with open eyes during the trials. The measuring device will be calibrated before each test. The study will consist of two 30-s trials performed with open and closed eyes. The participant will be asked to conduct the test without shoes, in a relaxed standing position, with arms down by the sides. |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of strength and quality of grips carried out on the Pablo |
Assessment of the strength of a cylindrical grip and extension as well as grips: pincer, lateral, two-point, three-point measured in kilograms and the force control index (0-100 points). The force control index is determined on the basis of: force reaction time, release time, force value exceeding, bending and extension time control. |
at baseline, immediately after treatment completion |
|
Secondary |
Analysis of gait spatiotemporal parameters carried out on Zebris |
The Zebris FDM-T is fitted with an electronic mat of 10,240 miniature force sensors, each approximately 0.85 × 0.85 cm embedded underneath the belt. The treadmill's contact surface measures 150 × 50 cm and its speed can be adjusted from 0.2 to 22 km/h, at intervals of 0.1 km/h. When the subject will stands/walks on the treadmill, the force will be exerted by his feet (the so-called reactive-normal force) and recorded by the sensors at a sampling rate of 120 Hz. Dedicated software will be integrated the force signals and provides 2D/3D graphic representation of major spatiotemporal parameters. |
at baseline, immediately after treatment completion |
|
Secondary |
Analysis of isometric muscle strength carried out on RoboGait |
Based on the gait analysis carried out with the RoboGait, the isometric muscle strength will be obtained. |
at baseline, immediately after treatment completion |
|
Secondary |
Analysis of gait carried out on Ekso Skeleton |
The EksoGT powered robotic exoskeleton will be used to provide the experimental intervention for this study. The number of steps during training will be assessed. |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of manual skills using Box and Blocks Test |
The test uses a wooden box, divided into two equal parts by a partition, as well as 150 blocks. The subject moves as many blocks as possible from one part of the box to the other during 60 seconds |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of handgrip function using Franchay scale |
The scale consists of 7 tasks (pass/fail grading); the patient is awarded 1 point for each activity performed successfully, or 0 points for a failure to perform. The maximum score of seven points may be achieved for the performance of the tasks. Higher score corresponds to better manual skills. The scale measures the proximal control of the upper limb and the manual skills |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of ability to perform basic activities of daily living using Barthel Index |
Barthel Index is a scale for ADL (Activities of Daily Living) measurement, with lower scores indicating greater dependency in ADL. The score value ranges between 0 and 100 points. The assessment of the total score is as follows: 0-20 completely dependent; 21-61 almost completely dependent; 62-85 dependent; 91-100 - independent |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of body composition using subjected to bioelectrical impedancy analysis - Tanita 780 |
The TANITA is an 8-contact electrode system capable of acquiring segmental body composition analysis without the need for gel electrodes. Measurements using the TAN segmental body composition analyzer were recorded following a standardized 10-min standing period to minimize acute shifts in fluid distribution. Subject details were entered into the TAN, including information on clothing weight, gender, age, and height. When prompted, subjects stepped onto the footpads and grasped the handles. Analysis took approximately 10 sec during which time the subjects remained still and relaxed. Measurements were recorded in the standard mode. |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of quality of life using The World Health Organization quality of life (WHOQOL) - BREF |
The WHOQOL-Bref questionnaire was used to assess the quality of life, which allows to obtain a profile of quality of life on the basis of the analysis of the last 14 days in four domains: physical, psychological, social and environmental. Answers to the questions asked are classified in a five-point scale, and the interpretation of the obtained results has a positive direction. This means that the greater the number of points scored in each of the assessed domains, the better the quality of life of the subject. |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of level of disability using The World Health Organization Disability Assessment Schedule (WHODAS 2.0) |
The questionnaire enables the assessment of the functioning of people in the last 30 days in six domains of life: understanding and communicating, getting around, self-care, getting along with people, life activities and participation in society. Answers to the questions were classified in a five-point scale in which, along with the increase in the score obtained, the severity of the problem increases (no problem - 1 point, extremely big problem - 5 points). After summing up the results obtained in each of six domains and converting them to the 0-100 point range, it is also possible to assess the overall disability level, in which 0 points means no disability and 100 points - total disability |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of Lung Capacity assessment using a peak expiratory flow (PEV) measurement |
Lung Capacity was measured based on peak expiratory flow (PEF) and forced expiratory volume in 1 second (FEV1) using Peak flow meter (Peak Flow Meter Microlife PF 100, measuring range: 50-900 l/min and FEV1 0,01-9,99 l). Participants take a deep breath and blow air into the meter as fast as they can. For PEF and FEV1, at least three measurements were performed until the best values was selected |
at baseline, immediately after treatment completion |
|
Secondary |
An assessment of walking speed using the 10 meter walk test (10MTW) |
The 10 Meter Walk Test is a performance measure used to assess walking speed in meters per second over a short distance. |
at baseline, immediately after treatment completion |
|