Clinical Trials Logo

Clinical Trial Details — Status: Completed

Administrative data

NCT number NCT02232802
Other study ID # ENOXA/14/2
Secondary ID
Status Completed
Phase Phase 1
First received
Last updated
Start date August 4, 2014
Est. completion date December 5, 2014

Study information

Verified date October 2020
Source Chemi S.p.A.
Contact n/a
Is FDA regulated No
Health authority
Study type Interventional

Clinical Trial Summary

- The primary objective of the trial is to assess the single-dose relative bioavailability of Chemi Enoxaparin (80 mg/0.8 mL) and Clexane® (80 mg/0.8 mL) administered by subcutaneous (s.c.) injection, under fasting conditions in healthy volunteers. - The secondary objective of the trial is to assess safety and tolerability of Chemi Enoxaparin (80 mg/0.8 mL) and Clexane® (80 mg/0.8 mL) administered by s.c. injection, under fasting conditions in healthy volunteers.


Description:

This is an open-label, randomised, single-dose, 2-way crossover study to determine the comparative bioavailability of enoxaparin sodium from the Chemi Enoxaparin s.c. (80 mg/0.8mL) with that from the reference IMP, Clexane® s.c. (80 mg/0.8mL), following single dose administration in healthy male and female subjects. Each subject received each treatment over two separate treatment periods under fasting conditions. Each dosing day for male subjects will be separated by a washout period of at least 7 days. The study comprised a pre-study screen (within 14 days of the first dose), followed by 2 Treatment Periods (1 and 2). During each treatment period, subjects will reside at Simbec from the evening before dosing (Day 1), until at least 36 h post dose (evening of Day 2). On admission (Day -1), subjects will provide a urine sample for a drugs of abuse screen; this sample will also be tested to confirm a negative pregnancy result in female volunteers. A single dose of the randomised treatment will be given on the morning of Day 1 following an overnight fast and blood PK/PD samples collected from pre-dose up to 36 h post dose (14 samples). Safety will also be evaluated at specified times throughout the study. The post study visit will be conducted on Day 2 (36 h post-dose) of Treatment Period 2.


Recruitment information / eligibility

Status Completed
Enrollment 47
Est. completion date December 5, 2014
Est. primary completion date December 5, 2014
Accepts healthy volunteers Accepts Healthy Volunteers
Gender All
Age group 18 Years to 55 Years
Eligibility Inclusion Criteria: - Healthy male or female volunteer between 18 and 55 years of age. - Subject with a BMI of 18-30 (Body Mass Index = Body weight (kg) / [Height (m)]2) - Subject with no clinically significant abnormal serum biochemistry, haematology, coagulation factors and urine examination values within 14 days of the first dose. - Subject with no clinically significant abnormalities in 12-lead electrocardiogram (ECG) and vital signs determined within 14 days of the first dose. - Subject with negative human immunodeficiency virus (HIV) and hepatitis B surface antigen (HbsAg) and hepatitis C virus antibody (HCV) results. Exclusion Criteria: - Subject with hypersensitivity or idiosyncratic reaction to enoxaparin and/or low molecular weight heparins, and/or pork products. - Subject with a relevant history or presence of significant cardiovascular, pulmonary, hepatic, renal, hematologic, gastrointestinal, endocrine, immunologic, dermatologic, neurologic, or psychiatric disease. Or with history or presence of alcoholism or drug abuse; - Subject with clinically relevant abnormal physical findings or clinically relevant abnormal laboratory values indicative of physical illness; - Female subject who is pregnant or lactating - Female subject with weight < 45 kg or male subject with weight < 57 kg.

Study Design


Related Conditions & MeSH terms

  • Enoxaparin Sodium is Administered to Healthy Volunteers

Intervention

Drug:
Enoxaparin Sodium
comparison of bioavailability of generic Enoxaparin Sodium and Clexane
Enoxaparin Sodium
comparison of bioavailability of generic Enoxaparin Sodium and Clexane

Locations

Country Name City State
United Kingdom Simbec Research Ltd Merthyr Tydfil

Sponsors (1)

Lead Sponsor Collaborator
Chemi S.p.A.

Country where clinical trial is conducted

United Kingdom, 

Outcome

Type Measure Description Time frame Safety issue
Primary Cmax (Anti-FXa and Anti-FIIa) Cmax is the maximum measured plasma activity/concentration. Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti- FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Primary AUC0-t (Anti-FXa and Anti-FIIa) AUC0-t is the area under the plasma activity/concentration-time curve from the time 0 to the last measurable concentration, as calculated by the linear trapezoidal method. Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (at day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII). thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa).
As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti- FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC0-inf (Anti-FXa and Anti-FIIa) AUC0-inf is the area under the activity/concentration-time curve from time 0 extrapolated to infinity. It was calculated as the sum of AUC0-t plus the ratio of the last measurable value to the elimination rate constant. Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti- FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Tmax (Anti-FXa and Anti-FIIa) Tmax is the time to Cmax. Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (at day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti-FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Lambda Zeta (Anti-FXa and Anti-FIIa) Lambda zeta is the apparent first-order terminal elimination rate constant calculated from a semi-log plot of the plasma activity/concentration vs time curve.
Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (at day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti- FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary t1/2 (Anti-FXa and Anti-FIIa) T1/2 is the apparent first-order terminal elimination half-life calculated as 0.693/kel.Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (at day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti- FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Tmin (Anti-FXa and Anti-FIIa) Tmin is the time of Cmin. Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (at day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti- FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC%ex (Anti-FXa and Anti-FIIa) AUC%ex is the residual area, i.e. the percentage of the area under the curve (AUC) extrapolated to infinity observed from Tlast to infinity.
Blood samples (2 x 10 mL) for determination of plasma anti-FIIa and anti-FXa were collected from a forearm vein into a Citrate Sarstedt Monovette at the following time-points (at day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)) and kept frozen until analysis.
Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti-FIIa) activity. Results are presented as derived plasma PK parameters.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Cmin (Anti-FXa and Anti-FIIa) Cmin is the minimum plasma activity/concentration. Enoxaparin exerts its anti-coagulant effect primarily via interaction with anti-thrombin III (ATIII), thereby enhancing the inhibitory effect of ATIII on activated factor Xa (FXa) and thrombin/factor IIa (FIIa). As enoxaparin cannot be measured directly in blood, the PK of enoxaparin have been studied on the basis of its effect on clotting mechanisms, particularly the inhibition of FXa (anti-FXa) and FIIa (anti- FIIa) activity. Results are presented as derived plasma PK parameters. At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Cmax (Tissue Factor Pathway Inhibitor, TFPI) Cmax is the maximum measured plasma activity/concentration. Enoxaparin also releases tissue factor pathway inhibitor (TFPI), which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa. At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Cmax (Anti-FXa/Anti-FIIa Ratio) Cmax is the maximum measured plasma activity/concentration. The ratio of anti-FXa/anti-FIIa activity was calculated for each parameter. Reults are presented as derived ratio of PK parameters. At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC0-t (Derived Thrombin Generation) AUC0-t is the area under the plasma activity/concentration-time curve from the time 0 to the last measurable concentration, as calculated by the linear trapezoidal method.
Thrombin generated in the thrombin generation test can be quantified as platelet-rich or platelet-poor plasma using the calibrated automated thrombogram method, which monitors the cleavage of a fluorogenic substrate that is simultaneously compared to the known thrombin activity in a non-clotting plasma sample.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Cmin (Derived Thrombin Generation) Thrombin generated in the thrombin generation test can be quantified as platelet-rich or platelet-poor plasma using the calibrated automated thrombogram method, which monitors the cleavage of a fluorogenic substrate that is simultaneously compared to the known thrombin activity in a non-clotting plasma sample.
Cmin is the minimum plasma activity/concentration.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Tmin (Derived Thrombin Generation) Thrombin generated in the thrombin generation test can be quantified as platelet-rich or platelet-poor plasma using the calibrated automated thrombogram method, which monitors the cleavage of a fluorogenic substrate that is simultaneously compared to the known thrombin activity in a non-clotting plasma sample. Tmin is the time of Cmin. At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC0-t (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also releases tissue factor pathway inhibitor (TFPI), which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
AUC0-t is the area under the plasma activity/concentration-time curve from the time 0 to the last measurable concentration, as calculated by the linear trapezoidal method.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC0-inf (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also releases tissue factor pathway inhibitor (TFPI), which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
AUC0-inf is the area under the activity/concentration-time curve from time 0 extrapolated to infinity. It was calculated as the sum of AUC0-t plus the ratio of the last measurable value to the elimination rate constant.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Tmax (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also releases tissue factor pathway inhibitor (TFPI), which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
Tmax is the time to Cmax
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Cmin (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also releases tissue factor pathway inhibitor (TFPI), which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
Cmin is the minimum plasma activity/concentration.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Tmin (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also releases tissue factor pathway inhibitor (TFPI), which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
Tmin is the time of Cmin.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary T1/2 (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also releases tissue factor pathway inhibitor (TFPI), which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
T1/2 is the apparent first-order terminal elimination half-life calculated as 0.693/kel.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Lambda Zeta (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also releases tissue factor pathway inhibitor (TFPI)[5], which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
Lambda zeta is the apparent first-order terminal elimination rate constant calculated from a semi-log plot of the plasma activity/concentration vs time curve.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC%ex (Tissue Factor Pathway Inhibitor, TFPI) Enoxaparin also release tissue factor pathway inhibitor (TFPI)[5], which is thought to contribute to anti-coagulant activity, by inhibiting FXa generation and free FXa.
AUC%ex is the residual area, i.e. the percentage of the area under the curve (AUC) extrapolated to infinity observed from Tlast to infinity.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC0-t (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
AUC0-t is the area under the plasma activity/concentration-time curve from the time 0 to the last measurable concentration, as calculated by the linear trapezoidal method.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC0-inf (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
AUC0-inf is the area under the activity/concentration-time curve from time 0 extrapolated to infinity. It was calculated as the sum of AUC0-t plus the ratio of the last measurable value to the elimination rate constant
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary T1/2 (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
T1/2 is the apparent first-order terminal elimination half-life calculated as 0.693/kel.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Cmin (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
Cmin is the minimun plasma activity/concentration.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Tmin (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
Tmin is the time of Cmin.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary AUC%ex (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
AUC%ex is the residual area, i.e. the percentage of the area under the curve (AUC) extrapolated to infinity observed from Tlast to infinity.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Tmax (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
Tmax is the time to Cmax.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)
Secondary Lambda Zeta (Anti-FXa/Anti-FIIa Ratio) The ratio of anti-FXa/anti-FIIa activity was calculated for each major parameter.
Lambda zeta is the apparent first-order terminal elimination rate constant calculated from a semi-log plot of the plasma activity/concentration vs time curve.
At day 1(0.5, 1, 1.5, 2, 3, 4, 5, 6, 8, 12, 16h) and Day 2 (24 and 36h)