Clinical Trials Logo

Clinical Trial Details — Status: Completed

Administrative data

NCT number NCT00138853
Other study ID # 20030119
Secondary ID
Status Completed
Phase N/A
First received
Last updated
Start date November 2003
Est. completion date April 2010

Study information

Verified date February 2020
Source University of Aarhus
Contact n/a
Is FDA regulated No
Health authority
Study type Interventional

Clinical Trial Summary

The purpose of this study is to compare the early migration of two uncemented total knee arthroplasties with different metal coating. Only the tibial prosthesis plateau varies. One is made out of tantalum and has two short pegs for fixation into the tibia while the other is covered by titanium fiber-mesh on the bone-near site and has 4 short pegs for screw fixation into the tibia.


Description:

Around 4% of total knee arthroplasties (TKA) are revised 15 years after the primary operation, most due to loosening of the implant. The use of uncemented prostheses are expected to extend the fixation time and thereby the years of TKA survival. When a cementless implant is inserted, direct bone ingrowth to the implant depends on a complete primary stabilisation. Movement between the bone and implant will cause a fibrous membrane leading to micromotions. Micromotions can be evaluated by radiophotogrammetric analysis (RSA) in early follow-up and they have been shown to be a prognostic marker for painful loosening of the implant. Tantalum is a fairly new biomaterial designed with a high and bone-binding porosity. Tantalum has already proven to be a good prosthesis material facilitating fast bone-ingrowth and supplying mechanical qualities in the bone-prosthesis interface that surpasses the qualities of regular prosthesis materials by uncemented method. Titanium on the other hand has been used as a prosthesis coating for years and also promote prosthesis fixation by osteointegration. The purpose of this study is to compare the early migration of two uncemented total knee implants with different metal coating and fixation method. Only the tibial prosthesis plateau varies in design. One plateau is a 2 pegged tantalum monobloc and the other plateau is a modular titanium fiber-mesh coating with 4 short pegs for screw fixation into the tibia. Furthermore the extend of the expected micromovements between the polyethylene liner and the metal backing of the titanium plateau will be compared to the stable tantalum monobloc. Theoretically tantalum should allow a more optimal coating for bone ingrowth, but as primary stability is also important for longterm prostheses survival the method of primary fixation could alså play a role. To evaluate both the plateau-bone micromotions and the polyethylene-prosthesis micromovements metal markers have been placed on the prosthesis pre-operatively and furthermore into the tibial bone and into the tibial polyethylene during surgery allowing us to evaluate stereo x-rays by a photogrammetric analyses called RSA at the Orthopaedic Center, Aarhus University Hospital. Follow-up stereo x-rays will be scheduled for 1 week, 3 months, 6 month, 1 years, 2 years and 5 years post-surgery.


Recruitment information / eligibility

Status Completed
Enrollment 50
Est. completion date April 2010
Est. primary completion date April 2010
Accepts healthy volunteers No
Gender All
Age group 18 Years to 70 Years
Eligibility Inclusion Criteria: 1. Patients with one- or double-sided primary knee arthrosis. 2. Patients with a sufficient bone quality for implantation of an uncemented prosthesis. 3. Informed and written patient consent. Exclusion Criteria: 1. Patients with neuromuscular or vascular diseases in the affected leg. 2. Patients who peroperatively are estimated unsuitable for an uncemented knee arthroplasty e.g. due to bone cysts or dilution of the bone mass. 3. Patients who use non-steroid anti-inflammatory drugs (NSAID) and cannot refrain from taking them postoperatively (this includes COX-2-inhibitors). 4. Patients with osteoporosis estimated from the preoperative x-ray or former diagnosis of osteoporosis. 5. Patients with fracture sequelae. 6. Women, who are pregnant or are at risk of getting pregnant.

Study Design


Related Conditions & MeSH terms


Intervention

Device:
Tibial component
Tibial component inserted at the time of surgery

Locations

Country Name City State
Denmark Orthopaedic Center, Aarhus University Hospital. Aarhus

Sponsors (3)

Lead Sponsor Collaborator
University of Aarhus Aarhus University Hospital, Zimmer Biomet

Country where clinical trial is conducted

Denmark, 

Outcome

Type Measure Description Time frame Safety issue
Primary Polyethylene wear (mm) of the medial and lateral knee prosthesis compartments at 5 years followup measured with model-based radiostereometry Up to 5 years
Secondary Difference in MPTM (mm) tibial component migration from 2-5 years (stabilization 3) measured with model-based radiostereometry up to 5 years
Secondary Number of implants migrating above 0.2mm MTPM from 1-2 years (stabilization 2) and 2-5 years (stabilization 3) measured with model-based radiostereometry Up to 5 years
Secondary Osteolysis (radiolucent lines >1 mm) in the tibial periprosthetic region measured on radiographs Up to 5 years
See also
  Status Clinical Trial Phase
Completed NCT04657926 - A Trial of APPA in the Treatment of Knee Osteoarthritis Phase 2
Completed NCT02536833 - A Study Evaluating the Safety, Tolerability, and Efficacy of SM04690 Injected in the Target Knee Joint of Moderately to Severely Symptomatic Osteoarthritis Subjects Phase 2
Completed NCT03014037 - Comparing Mesenchymal Stem Cell Counts in Unilateral vs. Bilateral Posterior Superior Iliac Spine Bone Marrow Aspiration N/A
Recruiting NCT05937542 - A Qualitative Investigation of CLEAT Participants
Completed NCT03644615 - A Mindfulness Program (MBSR) in the Management of Symptomatic Hip and Knee Osteoarthritis N/A
Recruiting NCT06061367 - Muscles Strength and Gait Parameteres After TKA
Withdrawn NCT04976972 - A Comparison of Patients Receiving a Total Knee Replacement With Robotic Assistance or With Conventional Instrumentation N/A
Completed NCT05496205 - A SAD Study to Evaluate the Safety, Tolerability and PK/PD of iN1011-N17 in Healthy Volunteers Phase 1
Completed NCT03850665 - Comparison of Functional Outcome in Patients After Hip Arthroplasty Depending on Surgical Approach N/A
Completed NCT02826902 - Effect of Anesthesia on Quality of Recovery in Patients Undergoing Correctional Tibial Osteotomy - A Randomized Controlled Trial N/A
Completed NCT04402502 - Dynamic 4DCT to Examine Wrist Carpal Mechanics N/A
Completed NCT02923700 - Leukocyte-rich PRP vs Leukocyte-poor PRP for the Treatment of Knee Cartilage Degeneration: a Randomized Controlled Trial Phase 4
Completed NCT04564053 - Study of Safety, Tolerability and Pharmacokinetics of LNA043 in Japanese Osteoarthritis Participants Phase 1
Completed NCT05070871 - A Clinical Trial Investigating the Effect of Salmon Bone Meal on Osteoarthritis Among Men and Women N/A
Not yet recruiting NCT05036174 - Diphenhydramine Ointment for Knee Osteoarthritis N/A
Recruiting NCT02912429 - Onlay vs. Inlay Patellofemoral Arthroplasty N/A
Recruiting NCT02666443 - Low Dose Dexamethasone in Supraclavicular Blocks N/A
Active, not recruiting NCT02723929 - Effects of tDCS and tUS on Pain Perception in OA of the Knee
Terminated NCT02820766 - Journey II BCS CMS Total Knee System Compared to Other PS Total Knee Systems in PT Setting N/A
Withdrawn NCT02921594 - Kinematic Comparison of Vanguard XP and Vanguard CR Total Knee Arthroplasties N/A