View clinical trials related to Missing Tooth.
Filter by:Several recent systematic reviews have highlighted how the macrodesign of dental implants can influence stress distribution and biomechanical and biological behavior in implants immediately inserted in post-extraction sites. Finite element analyzes have confirmed the benefit of the inclination of the implant threads in reducing implant displacement in post-extraction sites, increasing primary stability, and decreasing stress in contact with the trabecular bone. Other comparative studies have shown that the design of the threads of the implant does not affect the distribution of stress in the surrounding bone. In view of the need to evaluate the influence of implant macrodesign in the case of implants inserted in post-extraction alveoli, this study will examine the clinical results of two different types of implants with different macrodesigns, with the aim of providing scientific evidence in this regard. The present study will investigate through a randomized controlled trial the effect of thread macrodesign of X-space implants on primary stability and osseointegration when inserted in post-extraction sites, as compared to cylindric 2P implants.
Clinical trial to evaluate the success rate of autotransplantation of teeth with advanced or completed root growth with intraoperative extracorporeal root tip resection in 20 patients.
The interest in partial coverage retainers such as inlays and onlays have increased drastically because these restorations are able to provide a more conservative option requiring minimal tissue removal thus preserving healthy tooth structure to a maximum extent. If patient rejects an implant treatment and enough sound tooth structure is available it would be desirable to restore a missing tooth with Inlay-Retained Fixed Partial Denture instead of full coverage retained one . The use of all-ceramic materials for inlays and onlays in restorative dentistry is becoming more popular , the proper selection of restorative materials, careful preparation design and adequate adhesion between tooth/restorative material interfaces considered important factor to prevent failures . Zirconia was introduced into dentistry in the 1990s.The high initial strength and fracture toughness of zirconia results from a physical property of partially stabilized zirconia known as transformation toughening. On the other hand, its white color, similar to the color of natural teeth and its ability to transmit light makes it useful in aesthetically important areas . Inlay Fixed Partial Denture restoration may have increased the risk of fracture due to the relative small size of restorations compared to the complete coverage restoration. An unfavorable distribution of stresses between the ceramic inlay and tooth structure may result in marginal deterioration around the inlay or its failure. The direction of forces on the occlusal surface of Inlay Fixed Partial Denture may lead to the phenomenon of submargination, ceramic fracture, wear at interface and postoperative hypersensitivity which remain a problem that require further investigation. One of the most important factors in the success and longevity of a restoration is to have an accurate marginal fit. Ideally, the cemented restoration should precisely meet the finish line of the prepared tooth. In reality, clinical perfection is challenging to achieve and to verify.
In implant dentistry, platform switching is a method used to preserve alveolar bone levels around dental implants. The concept refers to using an implant with slopped shoulder neck of narrower diameter on implants of wider diameter, rather than placing abutments of similar diameter, referred to as platform matching.The aim of the study is to compare the effect of bone-level implants versus the conventional implant on oral soft tissues.
Total of 48 subjects were randomly assigned to treatment groups: UT Health Science Center at San Antonio Chi Mei Medical Center, Tainan, Taiwan Patients require a maxillary non-molar extraction site that is planned to be replaced by a dental implant and crown. This includes Straumann BL SLActive: Narrow (3.3mm) & Regular (4.1mm) Crossfit implants in all available lengths. Patients were randomly selected to receive either FDBA (test) or Autogenous bone + DBBM (control/standard) for contour augmentation.
This investigation will be a clinical trial to study the performance of a high strength ceramic material for bridges to replace missing teeth. The ceramic material has been approved by the FDA for patient treatment. A computer technique will be used to make the bridges. The bridges will be cemented using an adhesive resin cement (MultiLink Automix/Ivoclar). The bridges are planned be evaluated for clinical performance at 6 months, 1 year, 2 years, 3 years, and if funding permits, 4 years, and 5 years. The purpose of the study is to measure how well the high strength bridges function over an extended period of time.
To compare platform-switched implants to platform-matched implants for replacement of a single missing tooth and their effect on: 1) Interproximal alveolar crest level in relation to implant platform. 2) Buccal implant recession. 3) Presence or absence of black triangle apical to the contact point. 4) Implant Success. 5) Adequate buccal tissue thickness.
The purpose of this study is to compare the success rates of two surgical protocols. One protocol will have the implants placed at the time of tooth extraction and placed into function. The other protocol will have the implants placed into healed extraction sites and placed into function.
An important result of healing after tooth extraction is a reduction in dimensions of the remaining bone at that site. This reduction of bone volume precludes successful restoration of the space using a dental implant. Bone augmentation has shown promise in clinical reports to reduce this loss of bone volume, thus allowing implant placement and restoration. The purpose of this study is to evaluate the clinical and radiographic outcomes of guided bone regeneration around dental implants placed in fresh extraction sockets.