Clinical Trial Details
— Status: Withdrawn
Administrative data
NCT number |
NCT05253105 |
Other study ID # |
TAB006-01 |
Secondary ID |
|
Status |
Withdrawn |
Phase |
Phase 1
|
First received |
|
Last updated |
|
Start date |
March 15, 2022 |
Est. completion date |
January 2027 |
Study information
Verified date |
February 2022 |
Source |
Shanghai Junshi Bioscience Co., Ltd. |
Contact |
n/a |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
The primary objective is to assess the safety and tolerability of TAB006 as monotherapy and
in combination with toripalimab in subjects with selected advanced solid malignancies,
including lymphoma, and to evaluate the recommended Phase 2 dose.
The secondary objectives are to: 1) describe the pharmacokinetic (PK) profile of TAB006
monotherapy and in combination with toripalimab and to describe the PK profile of toripalimab
when administered with TAB006, 2) evaluate antitumor activity of TAB006 monotherapy and in
combination with toripalimab; and 3) determine the immunogenicity of TAB006 monotherapy and
in combination with toripalimab and to determine the immunogenicity of toripalimab when
administered with TAB006.
Description:
OVERVIEW This is a Phase 1, multi-center, open-label, dose-escalation study of TAB006 in
combination with toripalimab. TAB006 is a recombinant humanized, IgG4κ (immunoglobulin gamma
4, kappa) monoclonal antibody (mAb) that specifically binds to the T cell immunoreceptor with
Ig and ITIM domains (TIGIT). Toripalimab is a human IgG4κ mAb that specifically binds to the
programmed death 1 (PD-1). It is estimated that up to 208 subjects with advanced solid
malignancies, including lymphoma will be enrolled in the study.
Subjects must have a histologically or cytologically confirmed advanced solid tumor,
including lymphoma.
The study has 3 parts; Part A dose-escalation, Part B cohort expansion, Indication dose
expansion.
Dose-Escalation Phase:
Patients who have experienced disease progression will be sequentially enrolled into 5
proposed dose cohorts in Part A and Part B (e.g., Part A Cohort 1, Part A Cohort 2, Part B
Cohort 1, Part A Cohort 3, Part B Cohort 2). In Parts A and B, TAB006 is administered as an
intravenous infusion (IV) over 60 minutes on Day 1 of each 21-day cycle. In Part B, TAB006 is
administered first, then toripalimab is administered IV over 60 minutes for the first dose.
If tolerated, subsequent doses of TAB006 and toripalimab will be administered over a minimum
of 30 minutes and no longer than 4 hours, if clinically indicated .
Part A is closed to enrollment. Enrollment will begin with Part B, starting at the TAB006 60
mg dose level.
The DLT evaluation period is defined as 21 days following the first dose and inclusive of any
dose delays > 14 days between initiation of the first and second cycle (i.e., if the second
cycle is not initiated on day 22). A patient is considered to be "DLT evaluable" if they
received both TAB006 and toripalimab and complete all evaluations in the DLT evaluation
period or are withdrawn within 21 days due to an AE meeting the definition of a DLT.
If that patient does not experience a Grade 2 drug-related AE during the DLT evaluation
period, enrollment in the next cohort will proceed. If that patient experiences a Grade 2
drug-related AE, that dose cohort and all subsequent cohorts will revert to a 3+3 design.
- If 0 of the first 3 patients in a dose cohort experience a DLT during the DLT evaluation
period, dose escalation may proceed to the next higher dose cohort with approval of the
safety monitoring committee (SMC).
- If 1 of the 3 patients in a dose cohort experiences a DLT during the DLT evaluation
period, that dose cohort will be expanded to at least 6 patients.
- If no more than 1 of 6 patients in the dose cohort experiences a DLT, dose escalation
may proceed to the next planned dose cohort with the approval of the SMC.
- If 2 or more patients in a dose cohort experience a DLT during the DLT evaluation
period, the MTD will have been exceeded, and no further patients will be enrolled into
that dose cohort or higher dose cohorts.
The protocol may be amended, based on the recommendation of the SMC, to enroll additional
patients in a previously tested lower-dose cohort or to add an intermediate-dose cohort.
Patients will be treated until unacceptable toxicity, disease progression per RECIST v1.1 or
2014 Lugano for lymphoma, withdrawal of consent, removal of the patient from study based on
investigator's judgment of unacceptable risks to the patient, study termination by the
Sponsor, or the completion of a total of 35 cycles (approximately 105 weeks) of study drug
treatment.
Treatment beyond RECIST-defined progression [i.e., immune unconfirmed progression (iUPD) per
iRECIST] is permitted only if the patient provides consent per IRB policy and, in the
judgment of the investigator, the patient is clinically stable, defined as:
- No signs or symptoms indicating clinically significant progression of disease;
- No decline in Eastern Cooperative Oncology Group (ECOG) performance status; and Absence
of symptomatic rapid disease progression requiring urgent medical intervention (e.g.,
symptomatic pleural effusion, spinal cord compression).
Patients who are treated beyond RECIST-defined progression may continue treatment until
evidence of immune confirmed progression (iCPD) per iRECIST, unacceptable toxicity,
withdrawal of consent, removal of the patient from study based on investigator's judgment of
unacceptable risks, study termination by the Sponsor, or the completion of a total of 35
cycles (approximately 105 weeks) of study drug treatment.
Dose expansion phase:
There will be 9-24 patients in dose expansion phase (9 to 12 patients each in 1-2 selected
dose cohorts in Part B [TAB006 followed by toripalimab 240 mg Q3W] to further evaluate
safety, PK and preliminary evidence of anti-tumor activity to support the selection of RP2D
of TAB006 alone or in combination with toripalimab.
Indication-specific Expansion Phase Up to four primary cancers will be identified for further
study in the indication-specific expansion phase. Each indication-specific cohort will enroll
approximately 40 patients with disease progression after at least one prior line of standard
treatment or for whom there is no standard treatment. All patients will receive TAB006 at the
RP2D in combination with toripalimab 240 mg Q3W in 21-day cycles.
Tumor response will be evaluated using the Response Evaluation Criteria in Solid Tumors
(RECIST v1.1), the immune-related Response Evaluation Criteria in Solid Tumors (irRECIST), or
the New Response Evaluation Criteria in Lymphoma (RECIL) 2017.
DOSAGE AND ADMINISTRATION TAB006 doses are 18mg, 60mg, 180mg, 600mg and 1800mg. Toripalimab
dose is 240mg. TAB006 alone or TAB006 plus toripalimab will be administered as a 60-minute
i.v. infusion for the first dose and may be decreased at the investigators discretion to 30
minutes in subsequent infusions.
SAFETY EVALUATIONS Assessment of safety will be determined by vital sign measurements,
clinical laboratory tests, Eastern Cooperative Oncology Group (ECOG) performance status
evaluations, diagnostic imaging, physical examinations, electrocardiograms, and the incidence
and severity of adverse events.
Safety will also include evaluations of immune safety and immunogenicity. EFFICACY
EVALUATIONS will include best overall response, objective response rate, duration of response
or duration of stable disease, progression free survival and overall response.
PHARMACOKINETIC EVALUATIONS : Non-compartmental analysis will be conducted using WinNonlin.
PK parameters of TAB006 including, but not limited to Tmax, Cmax, AUC, Vss, CL, t1/2, Cmin,
The Cmin of toripalimab will also be reported. Dose proportionality for TAB006 will be
assessed.
STATISTICAL METHODS Part A and Part B are based on the 3+3 design for dose escalation and
safety evaluation requirements. Indication Phase, sample size is estimated using Simon's
two-phase design minimax method.
All PK/Pharmacodynamic, immunogenicity, and safety data will be summarized and presented by
cohort as well as overall for the study, using descriptive statistics (number of subjects,
mean, median, standard deviation, minimum, and maximum) for continuous variables and using
frequencies and percentages for discrete variables.
For analysis of ORR and DCR, 90% confidence intervals (CI) will be calculated using the
Clopper-Pearson method. If the number of patients is higher than ten, 90% CI will be
calculated using the Kaplan-Meier method for analysis of DoR, TTR, PFS, and OS.