Celtra Quatro Crown Study

Fractured Tooth Clinical Trial

Official title: Clinical Evaluation of High Strength Zirconia-Reinforced Lithium Silicate Chairside CAD/CAM Crowns

Status Active, not recruiting

Clinical Trial Summary

This investigation will be a clinical trial to study the performance of a newly developed high strength ceramic material for crowns. The ceramic has been approved by the FDA for patient treatment. A computer technique will be used to fabricate the crowns in a single appointment without the need for a temporary crown or second appointment. Two adhesive resin cement techniques will be used to hold the crown to the tooth and they will be evaluated for creating sensitivity to the tooth. The purpose of the study is to measure how well the high strength crowns function over an extended period of time.

Clinical Trial Description

A recently introduced high strength, zirconia-reinforced lithium silicate (ZLS) ceramic material for full contour CAD/CAM crowns is reported to offer a more translucent and esthetic high strength crown in a more efficient oven firing process. Celtra Quatro (Dentsply Sirona) is submitted to a high temperature matrix firing cycle in the SpeedFire oven (Dentsply Sirona) to achieve high strength in less than 5 minutes following milling. It has a reported flexural strength of 650 MPa compared to 450 MPa for lithium disilicate glass ceramic and > 900 MPa for 3mol% full contour zirconia.

Most glass ceramic materials have a recommended material thickness of 1.5 mm to maximize the strength potential of the material. Occlusal reduction resulting in a crown thickness of 1.0 mm, equitable to the recommendation for full contour zirconia crowns, may be considered sufficient to maintain the desired high strength attained by the ZLS material. This would also result in a more conservative tooth preparation.

Another potential advantage of high strength ZLS crowns to many clinicians is that they may be inherently strong enough to allow for conventional cementation. However, for less retentive preparations, it may also be possible to adhesively bond the crowns through the use of adhesive resin cements.

It is the intent of this investigation to evaluate the clinical application and performance of the new high strength, zirconia-reinforced lithium silicate material (Celtra Quatro) for CAD/CAM-generated chair-side crown applications. Patients will be recruited to have 60 Celtra Quatro crowns prepared and delivered during a single dental appointment using a chairside CAD/CAM system (CEREC/Dentsply Sirona). The crowns will be recalled at 6 months and then yearly for 5 years to evaluate long-term outcomes of the crowns. ;

Related Conditions & MeSH terms

• Decayed Tooth
• Dental Caries
• Fractured Tooth
• Tooth Fractures
• Unsatisfactory Restoration of Tooth

• NCT number: NCT04604301
• Study type: Interventional
• Source: University of Michigan
• Status: Active, not recruiting
• Phase: N/A
• Start date: September 24, 2020
• Completion date: November 1, 2027