enGIneering For sporT for All

Cerebral Palsy Clinical Trial

— GIFT  

Official title:

enGIneering For sporT for All

Clinical Trial Details — Status: Recruiting

Administrative data

• NCT number: NCT04794114
• Other study ID #: 713
• Status: Recruiting
• Phase: N/A
• Start date: September 1, 2020
• Est. completion date: September 30, 2021

Study information

• Verified date: March 2021
• Source: IRCCS Eugenio Medea
• Contact: luigi piccinini, m.d.
• Phone: 031877111
• Email: luigi.piccinini[@]lanostrafamiglia.it
• Is FDA regulated: No
• Study type: Interventional

Clinical Trial Summary

hemiplegia is a pathological condition that affects one side of the body which is associated with difficulty in maintaining an upright posture and walking and which is commonly compensated for by using orthoses (AFO). However, the orthoses are inadequate for sports from a design and prescription point of view, which specifies that the goal of the orthosis is to support walking and that any other use compromises its reliability.

The main objective therefore provides for an improvement in the involvement of these children in sports activities (both at school and during leisure time) through the development of new generation orthoses.

Description:

The main objective therefore provides for an improvement in the involvement of these children in sports activities (both at school and during leisure time) through the development of new generation orthoses.

Secondary objective: the second objective involves the verification of the orthosis previously designed and built, ie the device must comply with the project specifications and allow the patient to perform sports activities. Correct functioning will be tested by functional evaluation of the model developed through biomechanical analysis of movement performed indoors (in the laboratory) and outdoors.

Notes on the calculation of the sample size: the project foresees the involvement at the moment of 20 children with hemiplegia under treatment at MEDEA to whom an overall improvement of the living conditions is to be guaranteed.

Steps: 1-Technology design - "to play together" 2 - Analysis and identification of the guidelines for the prescription of use; 3 - Evaluation of the motor biomechanical situation of subjects wearing orthoses: indoor and outdoor to evaluate the limits of the orthosis used; 4 - identification of indicators for the evaluation of motor performance; 5 - Identification of the technical specifications (functional and clinical, mechanical, structural, geometric, materials, design) of the new generation orthosis-sensor system.

6- Definition of inclusion criteria, recruitment of 20 subjects starting from Medea and contacts with schools and families to which they belong.

7- Validation- "to verify it really runs" WP5.1 - Functional evaluation of the model developed through biomechanical analysis of movement carried out in the laboratory.

The I.R.C.C.S E. Medea will appropriately select 20 children with hemiplegia and wearers of orthoses.

A biomechanical assessment will be performed through gait analysis to identify the limits of the orthosis used.

8- Two conditions will be evaluated:

• walking tests without orthoses;

• walking tests with orthoses usually used. From the comparative analysis of the collected data, the criticalities of the device will be defined in order to identify the project specifications of the new generation orthosis.

9-Following the design and construction of the new AFO, a biomechanical evaluation will be performed again by means of gait analysis to validate its correct functioning.

10- Further validation will be performed using virtual reality environments (GRAIL Gait Real time Analysis Interactive Lab).

After a rehabilitation process, once a certain degree of confidence has been reached in the use of the new orthosis, the device will be tested using outdoor wearable sensors. By doing so, it will be possible to identify indicators for the evaluation of sports performance.

Recruitment information / eligibility

• Status: Recruiting
• Enrollment: 20
• Est. completion date: September 30, 2021
• Est. primary completion date: September 30, 2021
• Accepts healthy volunteers: No
• Gender: All
• Age group: 6 Years to 11 Years

Eligibility

Inclusion Criteria:

• Users of Ankle Foot Orthosis (AFO) without any time limit;

• GMFCS 1-2 scale values;

• Ashworth triceps sural values <= 3.

Exclusion Criteria:

• patients using knee and hip orthoses (KAFO, HKAFO);

• patients who need assisted walking (use of crutches, walkers or other);

• uncooperative patients.

Related Conditions & MeSH terms

• Cerebral Palsy

Intervention

Device:
• experimental ankle foot orthosis
On the basis of an accurate kinetic and kinematic analysis, a customized orthosis in thermoplastic material with carbon inserts will be created that will make the brace more elastic and facilitate the child's motor activities.
• traditional ankle foot orthosis
The normal afos in thermoplastic material, while guaranteeing an ankle joint stability, make the joint more rigid and reduce the elasticity of movement especially during running, jumping and sprinting.

Locations

Country	Name	City	State
Italy	IRCCS E. Medea	Bosisio Parini	LC

Sponsors (1)

Lead Sponsor	Collaborator
IRCCS Eugenio Medea

Country where clinical trial is conducted

Italy, 

Outcome

Type	Measure	Description	Time frame	Safety issue
Primary	gait analysis with standard ankle foot orthosis	kinematic (joint angle during gait cycle) and kinetic evaluation (power generation and absorption and moments) both with standard orthosis	The evaluations are performed before the new ankle foot orthosis is delivered
Primary	gait analysis with experimental ankle foot orthosis	kinematic (joint angle during gait cycle) and kinetic evaluation (power generation and absorption and moments) both with experimental orthosis	The evaluations are performed 1 month after the new ankle foot orthosis is delivered
Secondary	G- sensor with standard ankle foot orthosis	accelerometric evaluation during running and sprinting (linar parameters, velocity, step length, cadency) with standard orthosis	The evaluations are performed before the new ankle foot orthosis is delivered
Secondary	G- sensor with experimental ankle foot orthosis	accelerometric evaluation during running and sprinting (linar parameters, velocity, step length, cadency) with experimental orthosis	The evaluation is performed 1 month after the new ankle foot orthosis is delivered