Evaluation of Mini Plates Anchorage With Forsus Fatigue Resistant Device

Malocclusion, Angle Class II, Division 1 Clinical Trial

Official title: Evaluation of Mini Plates Anchorage in Conjunction With Forsus Fatigue Resistant Device for Correction of Skeletal Class II Malocclusion in Growing Subjects: A Randomized Controlled Trial

Status Completed

Clinical Trial Summary

The purpose of this study is to determine if the Forsus Fatigue resistant Device appliance with direct skeletal mini plates anchorage is capable of achievement of skeletal mandibular effects while preventing the excessive proclination of the lower incisors at the end of the treatment when compared to the conventional Forsus Fatigue resistant Device appliance applied to the upper and lower dental arches in female patients with skeletal Class II malocclusion

Clinical Trial Description

1. Background:

Class II malocclusions are characterized by an incorrect relationship between the maxillary and mandibular arches due to skeletal or dental problems or a combination of both. The prevalence of this malocclusion was recently found to be 20.6% in the Egyptian population in the age between 11 and 14 years with mandibular retrusion as its most common characteristic. It was also mentioned that other populations showed the predominance of the mandibular retrusion (80%) as opposed to only 20% expressing excessive maxillary development.

Class II profiles attractiveness was previously investigated in the literature. It was found that patients, their peers, orthodontists and oral surgeons, rated subjects with Class I profiles as more attractive than others with Class II profiles. It was also reported that the profile of normal adolescent patients were more favorably perceived by laypersons than untreated Class II division 1 malocclusion subjects.

In growing patients having Class II mandibular retrusion, functional orthopedic appliances are commonly used for mandibular advancement based on the concept of growth modification. However, two main problems appeared to compromise the desired treatment outcomes of these appliances; the need for patient cooperation and the lack of the possibility of combining their use with fixed appliance therapy in order to shorten treatment duration.

Many systematic reviews and meta-analyses were recently performed in the literature answering the question of whether removable functional appliances (RFAs) produced skeletal effects for correction the skeletal discrepancy through inducing actual increase in mandibular dimensions. Most recently two systematic reviews concluded that the skeletal effects of RFAs were minimal and could be considered of negligible clinical importance. They mentioned that treatment of Class II malocclusion with RFAs was associated with a minimal stimulation of mandibular growth, a minimal restriction of maxillary growth and more significant dento-alveolar and soft tissue changes.

Fixed functional appliances were first introduced by Emil Herbst in 1905. Many types of fixed functional appliances were developed since then; including Jasper jumper and Twin force Bite corrector . The Forsus Fatigue Resistant Device (FFRD) was introduced by Bill Vogt in 2006. It represented a semi-rigid fixed functional alternative that was intended to overcome breakage problems of flexible fixed functional appliances. However, it was proven that dental changes were more significant than skeletal changes in the final occlusal results. These changes included mesial movement of the mandibular molars and proclination of the mandibular incisors. These unwanted tooth movements appeared to compromise the actual skeletal correction and jeopardize the stability of the results.

Several attempts were proposed to counteract the unwanted dento-alveolar side effects of fixed functional appliances. Use of lingual arches, increase the dimensions of the archwires, the introduction of negative torque in the archwires and the use of lower incisor brackets with lingual crown torque are some examples. Some studies used the mini implants in an attempt to limit the unwanted dental effects of fixed functional appliances. These studies proved that mini implants anchorage reduced the lower incisors proclination but they in turn increased the upper incisors retroclination and were not able to achieve significant skeletal mandibular effects.

Titanium mini plates were introduced for the use for orthodontic anchorage in 1999 as a skeletal anchorage system for open bite correction. They were proven to be well accepted by patients and providers, safe and effective adjunct for complex orthodontic cases. Other uses of mini plates in orthodontics included maxillary and mandibular molars distalization and orthodontic anchorage where it was reported that they were able to provide absolute anchorage. Bone anchored maxillary protraction using mini plates was reported to be successful in producing significant forward maxillary growth in Class III growing subjects. Recently mini plates were used for the direct loading of FFRD for correction of skeletal Class II malocclusion. They reported actual skeletal changes through the increase in the mandibular length with minimal dento-alveolar side effects. However, these results are only preliminary and have to be taken with caution because the study did not include control group.

2. Research Hypothesis:

The null hypothesis (H0) of this research is that use of direct mini plate anchorage in conjunction with FFRD will not be able to induce skeletal rather than dental effects for correction of the skeletal Class II malocclusion in comparison with conventional FFRD therapy or with untreated growing Class II control subjects.

3. Objectives:

The primary objective of this study is to determine if mini plates use in conjunction with FFRD will induce supplemental growth of the mandible in Class II malocclusion subjects with mandibular retrognathism.

Secondary objectives include

To determine if mini plates use in conjunction with FFRD will be able to:

• Reduce the dento-alveolar side effects produced by fixed functional appliances in treatment of skeletal Class II subjects

• Correct the soft tissue convexity in Class II subjects

• Correct molar and canines relationships

• Develop a patients' well-accepted treatment modality for correction of skeletal Class II malocclusion.

4. Study design

According to the norms of the CONSORT STATEMENT, this study will be clinical with intervention, in which the allocation of the subjects will be randomized (block randomization). This study will be parallel with blinding for the outcome assessors. The primary purpose of this study will be treatment.

5. Participants - Settings and locations where the data are collected

The treatment will be performed in the outpatient clinics of Department of Orthodontics of Cairo State University. This public university predominantly serves low-income population living in Cairo, Egypt. Data will be collected from April 2015 through August 2016.

6. Interventions

Two groups will receive treatment. Group 1 will be treated with the FFRD and mini plates anchorage for 10 months or until the correction of the malocclusion . Group 2 will be treated with conventional FFRD for 10 months or until the correction of the malocclusion. A third untreated control group will be included with an observation period of 6-8 months.

7a. Sample size

Our sample size calculation is based on a study which compared the use of Herbst appliance with and without mini implants anchorage and reported a significant increase in the Herbst mini screw group over their control group. The mean change in the mandibular length in the treatment and control groups were 4.6±2.43 mm and 0.9±2.09 mm respectively. Thus the mean difference was 3.7 with the within group standard deviation set at 2.26.

Because three groups will be compared, Bonferroni adjustment was used as alpha level/number of comparisons = 0.05/3= 0.0167 to adjust for multiple comparisons.

Power and Sample size calculation (PS) software (department of biostatistics Vanderbilt University) was used for sample size calculation. A t test was performed with the power was set as 0.9, allocation ratio of 1:1:1 and the Type I error probability (alpha) associated with this test was set as 0.0167. Results of the test showed that "The Group sample sizes of 11, 11 and 11 achieve 90% power to reject the null hypothesis of equal means with a significance level (alpha) of 0.0167"

Therefore, 33 subjects will be needed, with 11 subjects in each group. To account for patient loss to follow up (attrition), a sample size of 48 patients will be selected and divided into three groups, sixteen each.

7b. Interim analysis and stopping guidelines

In the group with mini plates anchorage, in case of mobility in the mini-plates in any subject, the load will be removed for about two weeks. After that, the load will be restored. If the mobility persists, surgical exposure of the mini plate will be done and either insertion of longer mini screws ion the same mini plate or a change in the position of the mini plate will be done.

Any harms, adverse effects or unintended effects of the study intervention will be documented and reported. Post-surgical swelling and pain are anticipated and will be addressed by antibiotics and pain killers. Other unanticipated surgical harms have to be immediately managed and will be reported. Harms related to the orthodontic appliances will be managed by the principal investigator.

8. Randomization

8a. Sequence generation

The randomization of the recruited subjects will be done with a randomized list, using random.org website. This list is made by an individual not involved in the clinical trial (S.B.)

8b. Type

The type of randomization will be block randomization. The number of blocks and block sizes will be blinded to the investigators.

9. Allocation and concealment mechanism

• Each patient will be allocated a number from sequentially numbered opaque sealed envelopes after fulfillment of the inclusion criteria and signing the informed consent to be enrolled in the study.

• According to the number, the patients will be then allocated into one of the groups using a randomization table.

10. Implementation

Before the beginning of the research, the allocation sequence will be generated by a person not involved in the study (Dr S.B.). The random list will be sealed from the principal investigator who will enroll participants. After the participant takes a sealed number, S.B. will be contacted to implement the allocation. All the study contributors will have no access to the random list. The envelopes will be closed with the type of treatment selected for storage of the information.

11. Blinding

Blinding will be carried out only for the data assessment because the researchers, participants and subjects can not be blinded. Therefore, a person who does not know the nature of the trial will analyze the data. ;

Related Conditions & MeSH terms

• Fatigue
• Malocclusion
• Malocclusion, Angle Class II
• Malocclusion, Angle Class II, Division 1

• NCT number: NCT02475785
• Study type: Interventional
• Source: Cairo University
• Status: Completed
• Phase: N/A
• Start date: January 2015
• Completion date: December 2016