Microcirculatory Status After Intravascular Lithotripsy

Coronary Artery Disease Clinical Trial

— MARVEL  

Official title:

Microcirculatory Status After Intravascular Lithotripsy

Clinical Trial Details — Status: Completed

Administrative data

• NCT number: NCT05134051
• Other study ID #: 2020/066
• Status: Completed
• Phase: N/A
• Start date: October 6, 2020
• Est. completion date: December 31, 2021

Study information

• Verified date: July 2022
• Source: Cardiac Research Institute BV
• Contact: n/a
• Is FDA regulated: No
• Study type: Interventional

Clinical Trial Summary

Due to differences in the mechanism of action, intravascular lithotripsy is likely to cause less distal embolization and microcirculatory dysfunction during plaque preparation. This may also translate into lower periprocedural myocardial infarction rates. Thus, this exploratory study aims to evaluate the microcirculatory function after the use of Shockwave® intravascular lithotripsy.

Description:

Patients with stable coronary artery disease or stabilized acute coronary syndromes with severely calcified de novo coronary stenoses with indication of plaque modification technique during PCI. Due to differences in the mechanism of action, intravascular lithotripsy is likely to cause less distal embolization and microcirculatory dysfunction during plaque preparation. This may also translate into lower periprocedural myocardial infarction rates. To perform the invasive physiology assessment an intracoronary pressure and temperature sensor-tipped guidewire is used to measure distal coronary pressure and to derive thermodilution curves. For the calculation of IMR three thermodilution curves can be obtained from a hand-held, 3-ml rapid (<0.25s) injection of room temperature saline at baseline and during maximal hyperemia. Mean transit time (Tmn) at baseline and during maximal hyperemia is derived from the thermodilution curves. Simultaneous recordings of mean aortic pressure (guiding catheter, Pa) and mean distal coronary pressure (distal pressure sensor, Pd) is also obtained at baseline and during maximal hyperemia. The IMR is then calculated using the following equation: IMR = PaxTmn[(Pd-Pw)/(Pa-Pw)], where Pw is the coronary wedge pressure. Pw will be measured as the distal coronary pressure (from the distal pressure and temperature sensor) during complete balloon occlusion of the vessel obtained during PCI. The aim of the present study is to investigate the protective effect of IVL (Shockwave© Medical) on the coronary microcirculatory during PCI in calcific coronary stenosis, compared to RA.

Recruitment information / eligibility

• Status: Completed
• Enrollment: 20
• Est. completion date: December 31, 2021
• Est. primary completion date: December 1, 2021
• Accepts healthy volunteers: No
• Gender: All
• Age group: N/A and older

Eligibility

Inclusion Criteria:

• Angiographic inclusion criteria
• Severely calcified stenoses
• Vessels with RVD between 2.5 - 4.0 mm
• TIMI flow 3

Exclusion Criteria:

• Angiographic exclusion criteria
• Concomitant use of rotational atherectomy
• Severe vessel tortuosity
• Stenosis un-crossable with a balloon/guidewire
• Concomitant conditions
• Contraindication for adenosine administration.
• Hemodynamic or electrical instability.
• Active liver disease or hepatic dysfunction, defined as AST or ALT > 3 times the ULN.
• Severe renal dysfunction, defined as an eGFR <30 mL/min/1.73 m2, unless the patient is in renal support therapy.
• Other exclusion criteria
• Unable to provide written informed consent (IC)
• Known pregnancy or breast-feeding at time of inclusion; pre-menopausal women, unless sterilized, must take an effective method of birth control up to 15 weeks after the end of treatment with IP
• Prior myocardial infarction subtended to the PCI target vessel.
• Akinesia or dyskinesia in myocardial segments in the distribution area of the PCI target vessel.
• Severe systolic dysfunction defined as left ventricular ejection fraction < 35%.
• Patent arterial or venous surgical graft supplying the PCI target vessel.
• Previous TIMI flow < 1 before guidewire crossing.
• Patient not eligible for drug-eluting stent treatment.

Related Conditions & MeSH terms

• Chronic Coronary Insufficiency
• Coronary Artery Disease

Intervention

Device:
• Shockwave® Intravascular Lithotripsy System (Shockwave Medical Inc)
IVL is a novel balloon catheter-based device that utilises pulsatile mechanical energy to disrupt calcified lesions. IVL differs from other types of lithotripsy with respect to depth of penetration. It is a single-use, sterile, disposable balloon catheter. The emitters convert electrical energy into transient acoustic circumferential pressure pulses that disrupt both superficial and deep calcium within plaque. The balloon catheter is connected to the generator, which is programmed to deliver the specified dosage of pulses. The IVL balloon, sized 1:1 to the reference artery ratio, is inflated low pressure (4 atm) with 10 pulses of ultrasound energy of 10s delivered per balloon. The procedure is repeated to provide a minimum of 20 pulses in the target lesion, with interval deflation to allow distal perfusion. Each catheter can emit a max of 80 pulses at a rate of one pulse per second. If the lesion exceeds the 12mm balloon length, the balloon can be repositioned and the IVL repeated.

Locations

Country	Name	City	State
Spain	Hospital San Carlos	Madrid

Sponsors (1)

Lead Sponsor	Collaborator
Cardiac Research Institute BV

Country where clinical trial is conducted

Spain, 

Outcome

Type	Measure	Description	Time frame	Safety issue
Primary	Index of Microcirculatory Resistance (IMR) after IVL		through study completion, an average of 1 year
Secondary	Post-PCI FFR after IVL		through study completion, an average of 1 year
Secondary	Rate of periprocedural myocardial infarction		through study completion, an average of 1 year