View clinical trials related to Syndesmotic Injuries.
Filter by:Ankle fracture is one of the most common orthopedic injuries. Approximately, 20% of surgically treated ankle fractures are associated with syndesmotic instability.According to the mechanism of the injury the syndesmotic disruption should be considered in Danis-Weber C-type fractures. However, such injuries were also frequently seen in Danis-Weber B-type fractures. Failure to detect and repair syndesmotic injuries early may result in poor clinical outcomes and complications affecting ankle function, such as long-term residual pain, post traumatic arthritis, and ankle impingement syndromes. Therefore, aggressive treatment is important when facing syndesmotic instability . The distal tibiofibular syndesmosis is important for stability of the ankle mortise and thus for weight transmission and walking. Syndesmotic injuries are most commonly associated with fibular fractures, but they can also occur in isolation or with damage to the lateral ankle ligament after traumatic supination. The need for syndesmotic fixation of the distal tibiofibular joint has been controversia. fracture does not correlate reliably with the extent of the interosseous membrane tears identified on MRI of ankle fractures, and thus estimation of the integrity of the interosseous membrane and subsequent need for trans-syndesmotic fixation cannot be based solely on the level of the fibular fracture. An intraoperative syndesmotic stress test can establish the presence or absence of syndesmotic instability, evaluating the integrity of the syndesmosis by grasping the stabilised fibula with a hook or clamp and pulling it laterally. If more than 3 or 4 mm of lateral displacement occurs, syndesmotic fixation is necessary. Most authors recommend surgical placement of a trans-fixation screw after anatomical reduction of the syndesmosis if a disruption is diagnosed to avoid complications.The main aims of treatment for dislocation of the distal tibiofibular syndesmosis are to restore the original anatomy and normal function and to recreate the stability of the ankle joint. The syndesmosis is traditionally fixed with a metallic screw, which is a method that has been used for decades and demonstrates good to excellent outcomes. Some surgeons prefer Fixation of syndesmosis with screw in maximum ankle dorsiflexion and others prefer fixation in neutral position of ankle.in this study we are going to compare between these two
The purpose of the study is to evaluate the ability of the Fibulink Syndesmosis Repair System to maintain reduction of the ankle syndesmosis. Appropriate reduction of the syndesmosis is critical due the changes in tibiotalar contact pressure observed in cadaveric studies.6,7 Malreduction and instability of the distal tibiotalar joint can lead to chronic instability, increased articular damage and ultimately degenerative arthritis.7,8 Medial to lateral translation of distal tibia and fibula of 2 mm or more has been considered pathologic.9 Earlier biomechanical study demonstrated the Fibulink system is superior in maintaining displacement of less than 2 mm.4 Given the improved strength, we also look to evaluate the outcomes of initiating full weight bearing (100%) with Controlled Ankle Motion (CAM) boot at 4 weeks postoperatively. One of the big limitations for trans-osseous screw fixation is delayed weight bearing due to risk of screw breakage.1 Suture button technique allowed for early weight bearing with average of 6 weeks postoperatively using TightRope.2,10-12By initiating full weight bearing (100%) with CAM boot at 4 weeks postoperatively, this would be a significant improvement in current clinical practice.
This project consists of a randomized controlled study design. Study candidates will include all patients 18 years or older, who were evaluated at UCSD and found to have an acute ankle syndesmosis injury requiring surgery. Patients who consent to study participation will be randomized to receive one of two standard of care procedures - either a suture button or Fibulink implant. Outcome measures, including the Olerud-Molander and American Orthopaedic Foot and Ankle Society scores, pain, range of motion, time to return to work, and radiographic evaluation will be collected for each participant. Given the potential degenerative changes and poor radiographic and clinical outcomes with inadequate repair of the syndesmosis, it is imperative to evaluate existing and emerging methods of fixation for patients with acute ankle fractures with syndesmosis injuries.
The investigators aim to evaluate the fixation of the ankle syndesmosis in appropriate ankle fractures with bioabsorbable screws. Ankle fractures are common, and a proportion of them involve both fracture of the bone and also disruption of the syndesmosis, a strong ligamentous complex connecting the distal fibula and tibia. If left without fixation this causes a high incidence of pain and early arthritis. The most common technique for fixation of this syndesmosis involves the use of the same type of metal screws used to fix the fractured bones. As the syndesmosis permits small degrees of movement in normal subjects, fixation of this with metal usually leads to screw breakage and, or pain. It is common practice to remove these screws after a period of time once the syndesmosis has healed in the correct position. Bioabsorbable screws have the advantage of allowing small increments of movement, and also resorb naturally therefore do not have to be removed with a second surgical procedure. They are used in other centres worldwide, and the investigators therefore seek to evaluate syndesmosis fixation with them in their unit. The investigators would aim to recruit patients who have a syndesmotic injury requiring fixation, and who can consent to participating. They would undergo an identical surgical procedure to the standard current practice, apart from using a bioabsorbable screw in exchange for the metallic screw for syndesmosis fixation. All other components would remain unchanged, as would post operative protocol and management. To evaluate the fixation the investigators would use a limited CT scan (equivalent of about 3 months background radiation) after the time of fixation and at one year. This will help to assess the maintenance of reduction of the syndesmosis with time. The investigators would also assess patient reported outcome measures and pain scores, length of procedure and intraoperative radiation levels, weight bearing distribution tests, as well as any complication that may arise.
Ankle fractures are a common injury with potentially significant morbidity. Syndesmosis injury occurs in 10% to 13% of ankle fractures and poses a greater risk to long-term outcomes for patients. The gold standard for syndesmosis fixation has traditionally been screw fixation. However, issues with screw fixation include screw breakage, screw loosening, reoperation, and malreduction. Due to growing concerns with static screw fixation, implants based on the flexible suture button design, such as the TightRope system, gained traction. The Fibulink Syndesmosis Repair System, a relatively new design that became clinically available in 2017, has showed promising results. To our knowledge, there is no study that directly compares outcomes with the Fibulink implant to suture button implants.
Study population: the investigator set them sample size to 30 patients. Primary endpoint (concerning both study questions): is the applied torque measurement in Newton meters (maximum up to 7.5 Nm) up to the pain tolerance limit. For the chronic injuries, a minimum of 5 Nm should be achieved. If this is not possible due to pain, an intra-articular infiltration into the upper ankle joint with 5ml Ropivacaine 2% is performed under sterile conditions. In addition, fibula translation while exercising the maximum tolerated External Torque CT (maximum up to 7.5 Nm). Secondary endpoint (1st study question): the comparison to stress fluoroscopy without anesthesia and under anesthesia. Secondary endpoint (2nd study question): the comparison of patients with and without symptoms. Secondary endpoint in patients who received intra-articular infiltration is the increase in tolerated Newton meters.
This study aims to 1) characterize skeletal muscle pH during/after tourniquet use and 2) investigate any relationship between intraoperative tourniquet use and postoperative functional measures and patient-reported outcomes.
Ankle fractures constitute 9% of all fractures and have an incidence of approximately 187 per 100,000 persons per year in Norway. A posterior malleolar fragment (PMF), located on the lower backside of the tibia, is present in up to 46% of Weber B. Weber B fractures are the most common type of fractures of the fibula, located at the height of the syndesmosis. Patients with a PMF were recently shown to have significantly lower patient-reported outcome measures (PROM) than the general population. For this reason, the indication and choice of intervention for these fractures have been the object of increased interest over the recent years. It is one of the most debated areas within ankle fracture surgery. Traditionally, these PMFs have been treated with closed reduction, without direct manipulation of the PMF, anteroposterior screw fixation, or even no-fixation of the smaller fragments. A more novel posterior approach to the ankle for open reduction and internal fixation is increasingly popular and has led to fixation of smaller and medium-sized PMFs. Studies suggest fracture reduction is better with a posterior approach. However, there is no consensus as to what the best treatment is. There are no available randomized controlled studies examining PROM in patients after surgery with fixation versus no fixation for the PMF. Through a multicenter prospective randomized controlled trial initiated from Haukeland University Hospital, patients will be recruited and randomized to receive treatment with or without fixation of the PMF. Patients will be recruited at six study hospitals from all Regional Health Trusts in Norway. Treatment today is often based on local tradition and retrospective, ambiguous literature. As there is no clear evidence supporting the choice to fixate, or not fixate, the posterior malleolus fracture. The current study can contribute new knowledge and thereby contribute to an evidence-based approach to treating these patients. Mason and Molly type 2A and 2B fractures will be included in the study.
There is a high incidence of re-operations after surgery for ankle fractures. According to the Danish Fracture Database (DFDB) the re-operation rate, excluding hardware removal, is almost 10%. We are conducting a study on the efficacy of an evidence based algorithm for the treatment of ankle fractures.