Regeneration of Alveolar Sockets With rhBMP-2-loaded Bovine Bone Mineral — PROTEOGRAFT  

Alveolar Bone Loss Clinical Trial

Official title: Post-extraction Bone Regeneration of Partially Destroyed Sockets With Bovine Hydroxyapatite and rhBMP-2 Compared to Standard Guided Bone Regeneration Intervention (Bovine Hydroxyapatite and Collagen Membrane)

Status Recruiting

Clinical Trial Summary

Aim of the present investigation will be to evaluate the efficacy and safety of a granulate of rhBMP-2- loaded bovine bone mineral (rhBMP-2-BBM) as alveolar bone regeneration procedure following tooth extraction.

Forty (40) patients (both sex; age 18 years and older) requiring extraction of one (1) hopeless tooth (incisor, canine or premolar with loss of bone height of 5 mm or more in buccal alveolar wall), followed by alveolar bone regeneration (ABR) and placement of an endosteal implant will be enrolled into the study.

After exodontia, participants will be randomized and divided into two groups: in Experimental Group the socket will be grafted with rhBMP-2-BBM granules (1.0-0.25 mm); in Control Group the sockets will be grafted with Bio-Oss granules (1.0-0.25 mm) and covered with porcine collagen barrier membrane (Bio-Gide).

The end of the study will be fixed at the implantation surgery, seventeen (17) weeks after exodontia an ABR. Cone beam computed tomography (CBCT) scans will be made, immediately after (0), and sixteen (16) weeks after exodontia an ABR and the gain in alveolar bone height will be estimated and used as the primary outcome for comparison of both groups.

As secondary efficacy outcomes the change in alveolar bone width estimated from the CBCT scans; initial (0) and at seventeenth (17th) week after tooth extraction; the change in dental arch dimensions estimated from tridimensional models obtained from intraoral scans at one week before (-1) and sixteen (16) weeks exodontia an ABR; and the amounts of new bone, remnant material and connective tissue histomorphometrically measured in a bone biopsy collected during the implantation surgery at seventeenth (17th) week, will be considered.

Healing of gingival tissues at first (1st) and second (2nd) week and incidence of adverse reactions at first (1st), second (2nd) and sixteenth (16th) week, are used as secondary safety outcomes.

Clinical Trial Description

It is an interventional and therapeutic clinical trial, as well as unicentric, prospective, parallel, controlled, random, and doble-blind (participants and outcomes assessors).

It is aimed to assess the efficacy and safety of an experimental combined medical device consisting of rhBMP-2-loaded bovine bone mineral (rhBMP-2-BBM) granules (1.0-0.25 mm) for alveolar bone regeneration (ABR) after extraction of a hopeless tooth (incisor, canine or premolar, both in upper and lower arch maxilla), having not less than 5 mm of bone height loss in vestibular wall, and planned insertion of an endosteal dental implant and prosthetic rehabilitation.

Participants will be recruited among patients attending the Dental Clinic of the Faculty of Dentistry of the Universidad Complutense de Madrid, Spain. There will be enrolled forty (40) voluntary (both sex; age 18 years and older) requiring extraction of one (1) hopeless tooth (incisor, canine or premolar with loss of bone height of five (5) mm or more in vestibular alveolar wall), followed by alveolar bone regeneration (ABR) and placement of an endosteal implant. Participants will be randomly and equitably distributed in two groups; Experimental and Control, each counting 20 participants.

Experimental group will be treated with rhBMP-2-BBM granules (1.0-0.25 mm) and Control group with Bio-Oss granules (1.0-0.25 mmm) and porcine collagen barrier membrane (Bio-Gide).

The enrollment will be open a maximum period of 12 months. Treatment and follow-up will last 18 weeks between the enrollment of one participant and the end of the study.

The research hypothesis is "(rhBMP-2-BBM) is more effective than and as safe as Bio-Oss+Bio-Gide for ABR of post-exodontia sockets with severe loss of vestibular bone height."

Outcomes are:

• Primary Efficacy Outcome: Bone height gain 16 weeks after baseline, radiographically measured.

• Secondary Efficacy Outcomes:

• Bone width change 16 weeks after baseline, radiographically measured.

• Dental arch dimensional change 16 weeks after baseline, measured from digital models.

• Need for second bone augmentation 17 weeks after baseline, clinically assessed.

• Amounts of New Bone; Remnant Material and Connective Tissue 17 weeks after baseline, histomorphometrically measured.

• Secondary Safety Outcomes:

• Early Healing Index 1 and 2 weeks after baseline, clinically assessed.

• Adverse reactions 1, 2 and 16 weeks after baseline, clinically assessed. Enrollment: Potential participants will be asked and examined to check they fulfil the inclusion criteria and vestibular bone height of the affected tooth will be measured by probing. Those fulfilling inclusion criteria will receive detailed explanation on the characteristics of the trial, their rights as participant, and asked for their consent to participate. Those accepting will receive a copy of the informed consent form, and will be scheduled for a First Visit.

First Visit (1 week before baseline): Participants will be asked to confirm full comprehension of their rights and duties and their will to participate, and required to provide the signed informed consent form. A digital scan of affected area including hopeless tooth and it neighbors will be obtained. The resulting STL file will be used to obtain the base dimensional measure of the alveolar ridge. The base STL file will be also used to design a customized splint which will be manufactured in thermoplastic polymer by 3D-printing and used in all CBCT scans to standardize radiographic measurements of height and width of the alveolar bone. The Second Visit will be scheduled in the term of 1 week (± 1 day) and participant will be indicated to brush teeth thrice a day and to rinse mouth with 0.12 % chlorhexidine twice a day till the appointment day, and amoxicillin 750 mg/8 h (or clindamycin 300 mg/6 h) for 24 h before the appointment day.

Second Visit (baseline): Atraumatic exodontia will be carried out under local anesthesia using a syndesmotome, manual or coupled to a piezosurgery unit, avoiding to damage the alveolar bone walls. The vestibular bone height will be probed to confirm the loss is greater than 5 mm. If not, the patient will be excluded and will continue to be treated by conventional procedures. Socket will be thoroughly curetted and CBCT scan with the customized splint will be obtained before the ABR treatment. Treatment with rhBMP-2-BBM or Bio-Oss+Bio-Gide will be randomly assigned and ABR procedure will be performed.

The socket is to be filled to the height of the interdental bone tables with the granules and gingiva is sutured with cross mattress stitches. For control group the granules of Bio-Oss will be covered with the Bio-Gide membrane before suturing.

The Third Visit will be scheduled in the term of 1 week (± 2 days) and amoxicillin 750 mg/8 h (or clindamycin 300 mg/6h horas) during the next 8 days is to be indicated; acetaminophen 1 g/8 h (in case of pain) and ibuprofen 400 mg/8 h (in case of swelling) till remission of symptoms. Oral care for the next two (2) weeks will consist in normal teeth brushing excluding the affected area, mouth rinsing with 0.12 % chlorhexidine twice a day, and avoiding use any removable prosthesis affecting regenerated area. A phone number will be provided to report any persistent (4-5 days) adverse effect or emergency.

Third Visit (1 week after baseline): Healing and adverse reactions outcomes will be assessed. The Early Healing Index (PMID: 12795787) will be used for healing assessment. Adverse reactions are to be assessed on the basis of clinical exam and participant questioning. Reactions to consider are facial erythema, local edema, local erythema; fever; local pain; granules exfoliation, and suppuration; and will be qualified as none, mild, moderate, or severe. A unique blind outcome assessor previously trained will assess both outcomes. Stitches will be removed and the Fourth Visit scheduled in a term of 2 weeks (±2 days) from baseline.

Fourth Visit (2 weeks after baseline): Assessment of healing and adverse reactions outcomes will be performed as above and the Fifth Visit will be scheduled in a term of 16 weeks (±1 week) after baseline.

Fifth Visit (16 weeks after baseline):

Clinical exam and assessment of adverse reactions outcome will be performed. Digital and CBCT (using the customized splint) scans will be obtained and used to assess the outcomes of bone height gain and bone width change according to (PMID: 30883942) and dental arch dimensional change as stated by (PMID: 30508313) by trained and calibrated blind assessor. The Sixth Visit will be scheduled in the term of 17 weeks (± 1 week) and participant will be indicated as in the first visit.

Sixth Visit (17 weeks after baseline, End of Study): A buccal full thickness flap will be elevated and dimensions and quality of the alveolar bone ridge will be inspected to assess the need for second bone augmentation outcome. If second bone augmentation is needed, participant goes out the trial, receive the bone augmentation and continues conventional treatment.

If no need for second bone augmentation, a biopsy specimen of the alveolar regenerated bone will be harvested exactly in the area where dental implant will be placed. At this point, participant exit the study and goes on to conventional endosteal implantation and subsequent prosthetic rehabilitation.

The biopsy specimen is fixed in 10 % buffered formalin and kept at 4 ºC until processing for histology and histomorphometry studies (PMID: 6809919). The amounts of New Bone; Remnant Material and Connective Tissue 17 weeks after baseline will be assessed by a trained and calibrated blind assessor as indicated in (PMID: 28634845). ;

Related Conditions & MeSH terms

• Alveolar Bone Loss
• Edentulous Alveolar Ridge
• Loss of Teeth Due to Extraction

• NCT number: NCT05717478
• Study type: Interventional
• Source: Universidad Complutense de Madrid
• Contact: Javier Sanz-Esporrin, PhD
• Phone: 913941920
• Email: javier.sanz.esporrin@ucm.es
• Status: Recruiting
• Phase: N/A
• Start date: November 15, 2022
• Completion date: September 15, 2024