Clinical Trials Logo

Clinical Trial Details — Status: Recruiting

Administrative data

NCT number NCT05500534
Other study ID # TELAXMAN
Secondary ID
Status Recruiting
Phase N/A
First received
Last updated
Start date September 5, 2022
Est. completion date June 2024

Study information

Verified date June 2024
Source LISA Laser Products GmbH
Contact Robert Allen
Phone +49 5556 9938 8859
Email rallen@omni-guide.com
Is FDA regulated No
Health authority
Study type Interventional

Clinical Trial Summary

Urolithiasis is an extremely common disease affecting about 12% of the world population with increasing tendency. Urinary stones are sediments that form in the kidney from crystals, such as calcium oxalate. Currently, urological endoscopy with laser lithotripsy represents the leading and most frequently used method for the treatment of urinary stones of different localization, size and composition. Surgical urology, including interventional stone treatment, is highly influenced by technology. With regard to fragmentation properties and effectiveness for all stone types Holmium:yttrium-aluminium-garnet (Ho:YAG) laser lithotripsy has become the standard technology to disintegrate urinary calculi. In addition, other kinds of lasers are emerging, such as the thulium fiber laser (TFL); a new solid-state, diode-pumped laser that may provide urologists with increased options for stone treatment. While urolithiasis treatment in general and laser lithotripsy in specific rarely goes along with major complications, recent studies have shown that there are possible indirect risks to the treatment with lasers, such as thermal damages to the urinary tract even at low-power settings if inadequate irrigation is applied. Sufficient irrigation is mandatory to perform safe Ho:YAG laser lithotripsy. The RevoLix HTL+ automatic real-time stone detection module was developed to overcome these limitations and improve the safety of the patient with regard to potential thermal damages. The objective of this clinical investigation is to assess the feasibility of stone recognition and disintegration with the RevoLix HTL+ in clinical conditions and to identify hypotheses to be used in future clinical investigations.


Recruitment information / eligibility

Status Recruiting
Enrollment 50
Est. completion date June 2024
Est. primary completion date June 2024
Accepts healthy volunteers No
Gender All
Age group 18 Years and older
Eligibility Inclusion Criteria: - Subject scheduled for laser lithotripsy - Subject aged 18 or older - Subject able to give consent - Informed consent documented by signature Exclusion Criteria: - Subject pregnant or nursing - Subject requiring emergency lithotripsy - Contraindication for the surgical procedure: - Positive urine culture, - Unfit for general anesthesia, - Therapeutic anticoagulation, or systemic infection

Study Design


Related Conditions & MeSH terms


Intervention

Device:
Laser lithotripsy with stone recognition
Application of Revolix HTL+ which features automatic real-time stone recognition
Other:
Laser lithortripsy
Standard laser lithotripsy

Locations

Country Name City State
Germany Universitätsklinikum Freiburg Freiburg

Sponsors (1)

Lead Sponsor Collaborator
LISA Laser Products GmbH

Country where clinical trial is conducted

Germany, 

Outcome

Type Measure Description Time frame Safety issue
Primary Visual assessment of stone-free status; Before retracting the ureteroscope, the surgeon will visualize the postoperative ureter along its entire length and record the stone-free status in the CRF, using the following scale:
0 - No residue
- Residual fragments =4mm
- Residual fragments >4mm Stone-free status is the state-of-the-art methodology for the description of the lithotripsy procedure, which is performed routinely at the investigation site. It does not require any additional invasive testing or procedures and it is performed intra-operatively.
During the procedure of laser lithotripsy, which should last for a maximum of 5 hours
Primary Visual assessment of stone, tissue and endoscope recognition accuracy during laser lithotripsy During the procedure, the surgeon will record every incidence of misrecognition by the RevoLix HTL+. Misrecognition is defined as inadequate laser pulse release on healthy tissue or endoscope. During the procedure of laser lithotripsy, which should last for a maximum of 5 hours
Primary Safety of device - assessment of device deficiencies Safety of the device shall be evaluated by systematically reporting DDs and by monitoring the frequency and incidence of these events During laser lithotripsy (duration of max 5 hours)
Primary Safety of device - assessment of adverse events during the intervention Safety of the device shall be evaluated by systematically reporting AEs and SAEs and by monitoring the frequency and incidence of these events During laser lithotripsy (duration of max 5 hours)
Primary Safety of device - assessment of adverse events during the follow up time Safety of the device shall be evaluated by systematically reporting AEs and SAEs and by monitoring the frequency and incidence of these events During the follow up time (up to 3 months)
Primary New risk identification during the intervention The practitioner will be asked to identify any new risks arising during laser lithotripsy using the investigational device Within 12 hours after the intervention
Primary New risk identification during the follow up time The practitioner will be asked to identify any new risks related to the investigational device during the follow up time During the follow up time (up to 3 months)
Secondary Total laser emitted energy (J) Total laser emitted energy is recorded by the laser system during each procedure. This data will be extracted after each procedure for the investigational arm and at the end of the investigation for the matching control arm. Immediately (up to 1 hour) after the end of the intervention
Secondary Procedure duration (min) Procedure duration will be recorded in the CRF as the time from endoscope insertion to retraction (Schnitt-Naht Zeit). Immediately (up to 1 hour) after the end of the intervention
Secondary PULS classification of potential lesions visible via endoscopy immediately after the procedure Before retracting the ureteroscope, the surgeon will visualize the postoperative ureter along its entire length and record PULS classification in the CRF.
PULS is a 5 grades scale (0 - No lesion; 1 - Super?cial mucosal lesion and/or signi?cant mucosal oedema/hematoma; 2 - Submucosal lesion; 3 - Perforation with less than 50% partial transection; 4 - Perforation with more than 50% partial transection; 5 - Complete transection), in which lesions are graded independently of their location and extent. In case of multiple lesions, the most severe grading is applied.
During the procedure of laser lithotripsy, which should last for a maximum of 5 hours
Secondary Usability and workflow assessment (surgeon's questionnaire) Immediately after his/her first procedure with RevoLix HTL+, the surgeon will fill in a questionnaire regarding the different aspects of the laser system. Within 12 hours after the intervention
See also
  Status Clinical Trial Phase
Not yet recruiting NCT02538731 - Laser Lithotripsy for Difficult Large Bile Duct Stones N/A