Laparoscopic Surgical Procedures Clinical Trial
Official title:
Enhancing Laparoscopic Skill Acquisition and Retention With Transcranial Direct-current Stimulation
Recent changes in medical training environments and restrictive work-hour regulations have greatly impacted trainees, limiting the number of opportunities to gain proficiency in procedural skills. Reports suggest that medical residents lack confidence in their ability to perform certain medical procedures, and program directors often do not believe their residents can operate independently in major procedures. Simulator based task training (SBTT) has provided a safe and ethically appropriate method of skill acquisition but training opportunities remain limited. Methods to enhance motor learning during these training opportunities have not been described. Transcranial direct-current stimulation (tDCS) is an emerging form of non-invasive brain stimulation that has been shown to improve motor learning. tDCS has been shown to enhance increasingly complex skill acquisition. The investigators propose to examine if tDCS can improve the acquisition and retention of laparoscopic surgical skill. The investigators propose a double blind, sham-controlled randomized trial applying tDCS during evidence-based SBTT of medical students and surgical residents, to determine if brain stimulation can enhance training effects and long-term skill acquisition. Even a modest enhancement carries the potential to transform medicosurgical skills training.
Rationale: Recent changes in medical training environments have resulted in many trainees
lacking sufficient opportunity to acquire specific skills necessary for their specialty. New
methods to enhance the acquisition and retention of medical and surgical skills are required
to ensure the quality of the future physician workforce. Transcranial direct-current
stimulation (tDCS) is an emerging method of non-invasive brain stimulation that has been show
to safely enhance motor learning in adults and children. Even a modest enhancement of
acquisition and retention of medical-surgical skill with tDCS carries the potential to
accelerate skill training for health care providers, thereby contributing to greater training
efficiency and improved patient outcomes.
Objectives: The objective of this study is to assess whether tDCS can enhance the acquisition
and retention of laparoscopic surgical ability.
Ethics:This study has been approval by the University of Calgary Research Ethics Board
Design: Randomized, double blind, sham-controlled trial to evaluate the ability of tDCS to
enhance learning and retention of laparoscopic skills.
Transcranial Direct-Current Stimulation: The tDCS methods used are based on best-available
evidence and practices, and will be applied in a standardized fashion by experienced
investigators. Anodal tDCS will be delivered through saline-soaked sponge electrodes using a
NeuroConn Direct-Current Stimulator (NeuroConn, Ilmenau, Germany). The anode will be centered
2cm posterior to the left primary motor cortex (localized using the 10-20 EEG System), with
the cathode over the contralateral supraorbital area. Both anodal and sham tDCS groups will
have the current ramped up to 1milliamp over 30 seconds. In the anodal tDCS group, the
current will be held for 20 minutes. In the sham tDCS condition, the current will be held for
only 60 seconds (no changes in cortical excitability) followed by a 30 second ramp-down.
Participants: Medical students (years 1-3) and general surgery residents (Post-Graduate Year
1-5) from the Cumming School of Medicine (University of Calgary) will be recruited. To ensure
comparable baseline skills, trainees will be excluded if they have undergone formal
laparoscopic training in the past 3 months (medical students only).
Sample size calculations are based on the performance measures for the pattern cutting score,
determined through pilot studies (discussed below). Based on a two-fold greater improvement
in score at post-training, power of 90% and type-1 error of 0.05, the investigators estimate
a sample size of a minimum of 48 participants (n=24 per stimulation condition, with an equal
number of residents and medical students per arm).
Study Design: A short questionnaire will be completed to determine demographic
characteristics, including: gender, age, level of training, date of last completed
Fundamentals of Laparoscopic Surgery course (if applicable), how many times participants have
performed laparoscopic surgery on a patient, how many times participants have performed
laparoscopic tasks on a laparoscopic simulator, how often participants play video games, and
how often participants play a musical instrument.
Participants will be recruited at the Advanced Technical Skills and Simulation Laboratory
(University of Calgary) and be oriented to the workspace. Participants will complete
laparoscopic task training on a laparoscopic box trainer (Fundamentals of Laparoscopic
Surgery Trainer System, Limbs & Things Inc, Georgia, USA) consisting of an optic camera,
laparoscopic instruments, and a monitor that displays the field of view. The optic camera
view will be recorded for retroactive scoring. Participants will view a standardized
laparoscopic training video, created by an expert in laparoscopic surgery, demonstrating two
Fundamentals of Laparoscopic Surgery (FLS) tasks that will be performed using the simulator:
a peg-transfer (A) and pattern cutting task (B). The peg-transfer task requires the use of
two dissectors to transfer six rings to pegs on the opposite end of the pegboard, and back to
the original location. The pattern-cutting task involves a 10x10cm piece of gauze with a
4cm-diameter circle pre-drawn in the middle that is placed at the center of the work-board.
Participants are required to use a dissector and endoscopic scissors to cut the marked
circle, freeing it from the surrounding unmarked gauze. A time score will be calculated by
subtracting the completion time in seconds from the task cut-off time of 300 seconds. An
error score will be calculated for each tasks as either: the percentage of pegs that could
not be transferred due to being dropped outside of the field of view (i.e. 1 of 6 pegs lost =
17 second penalty), or the percentage area deviation of cutting a perfect circle. A total
score is calculated by subtracting the error score from the time score. These two FLS tasks
represent skills that require bimanual (peg-transfer) or unimanual (pattern cutting)
abilities. Furthermore, these two tasks were chosen as scores correlate with training level,
and are predictive of intraoperative performance.
Participants will complete task A followed by task B, establishing baseline skill. Tasks will
be recorded and scored retroactively, blinded to group allocation, to quantify time and error
scores. Participants will be computer randomized to receive sham or active tDCS. Participants
will perform the two FLS tasks in an interleaved manner (ABAB), a paradigm suggested to
enhance laparoscopic skill acquisition, with eight training repetitions of each task.
Following the final training block, the tDCS electrodes will be removed, and a final task
evaluation will be performed for both task A and B. The Purdue Pegboard Test (PPT) will be
performed at baseline and post-training to examine unilateral hand function, serving as a
safety measure. Six weeks following the training the participants will return to assess
retention of laparoscopic skill, with a single repetition of task A and B. Emerging evidence
suggests that a significant decay in laparoscopic skill is present six weeks following
training. The amount of laparoscopic practice between the training day and follow-up will be
factored for residents, to ensure that standard training remains uninterrupted.
Data Analysis: Mean change in each outcome from baseline to post-training to follow-up will
be compared between tDCS and sham (two-way repeated-measure ANOVA for factors "stimulation
type" and "evaluation time point"). Two-way repeated-measures ANOVA for factors "stimulation
type" and "training block" will explore the interaction between tDCS and training with or
without feedback for each outcome. Any decay in PPT score in either sham or anodal tDCS
groups will be evaluated using a paired-tDCS. Medical students and specialty residents will
be evaluated independently. Level of training of residents will be factored retroactively
into our analysis.
;
Status | Clinical Trial | Phase | |
---|---|---|---|
Completed |
NCT03704259 -
Nano-Ceramic Coating for Laparoscope Lens
|
||
Completed |
NCT02320578 -
2D Versus 3D Radical Laparoscopic Hysterectomy for Cervical Cancer: a Prospective Randomized Trial
|
N/A | |
Enrolling by invitation |
NCT03503929 -
Feasibility and Usability of LaparoGuard
|
N/A | |
Completed |
NCT02417857 -
Comparison of Single İncision Laparoscopic Cholecystectomy Versus Laparoscopic Cholecystectomy
|
N/A | |
Completed |
NCT00433316 -
Pain Relief by Intra-Peritoneal Ropivacaine During Gynecological Laparoscopy
|
Phase 3 | |
Recruiting |
NCT00280553 -
A Pilot Study of Bupivacaine Infusion in Abdominal Surgery
|
Phase 2 |