Marginal Bone Level Around Implants With Definitive Abutments

Implant Site Reaction Clinical Trial

Official title: Marginal Bone Levels Around Implants With Definitive Abutments Of One and Three Millimeters: A One Year Of Follow Up Randomized Clinical Trial

Status Completed

Clinical Trial Summary

The aim of the present study was to evaluate the peri-implant crestal bone level around implants placed 1.5 mm subcrestally, with a 1 mm or 3 mm definitive abutment height at the time of implant placement after 1 year. Patients were selected from the Department of Periodontology at Universitat Internacional de Catalunya. X-rays were taken at the time of implant placement, 8-12 weeks after placement, after screwing the provisional rehabilitation and at 12 months. An examiner indicated the crestal marginal bone level, the marginal bone level of the implant, and the marginal bone level of the abutment . The examiner, independent to the study, carried out the radiographic analysis using the Image J software on periapical radiographs.

Clinical Trial Description

The aim of the present study was to evaluate the peri-implant crestal bone level around implants placed 1.5 mm subcrestally with PS and a 1 mm or 3 mm definitive AH at the time of implant placement after 1 year.

1. Study design

This randomized controlled prospective study was carried out after its acceptance by the Clinical Research Ethics Committee with code number PER-ECL-2015-05, at the Faculty of Dentistry of the Universitat Internacional de Catalunya (UIC-Barcelona).

2. Study population and selection criteria

Patients were selected from the Department of Periodontology at Universitat Internacional de Catalunya. Once signed the informed consent, patients were screened following inclusion criteria.

3. Randomization

The randomization between the groups (Group A/Group B) was performed using OxMaR system (Oxford Minimization and Randomization) to determine the use of a 1 mm (Group A) or 3 mm (Group B) height abutments. The surgeon was unaware of the abutment height until after the insertion of the implant.

4. Surgical and prosthetic treatment protocol Dental implants were placed by second and third year students of the Postgraduate Program in Periodontology at UIC-Barcelona, supervised by two experienced professors (MM, MA). Vega® implant, Klockner, several lengths (8, 10, 12 mm) and diameters (3.5, 4.0, 4.5 mm) were used depending on bone availability. The rehabilitation was carried out by students of the Postgraduate program of Esthetic and Prosthetic Dentistry at UIC-Barcelona, using the permanent prosthetic abutments with two different heights (1 or 3 mm) placed the day of surgery. The screwed-retained rehabilitations to the Permanent® abutment were single crowns or partial restorations (maximum of 3 crowns), both performed with CAD-CAM technology. Temporary restorations were placed between 2 to 4 months after surgery, for 4 weeks, before the placement of the definitive ones.

Treatment sequence:

• Preparation and implant surgery: a radiologic guide on a CBCT scan, and a standardized periapical radiograph were made for every patient. Pre-surgical instructions and medication such as antibiotic prophylaxis was made with 500 mg Amoxicillin every 8 h starting 1 hour prior to surgery, and 500mg/8h for 7 days. In allergic patients, Clindamycin 300 mg every 8 h, starting 1 day previously was used, and 300mg/8h/7days. The KM thickness was assessed before raising the mucoperiosteal flap. The placement of the implant was done following the manufacturing protocol and using a surgical guide according to the radiological guide previously used. IAll implants were placed 1.5 mm subcrestally from the most apical area of the crest, using a periodontal probe. At this time, the Permanent® abutment of 1 or 3 mm was chosen randomly and was placed at 35 Ncm. Postoperative anti-inflammatory medication (ibuprofen 600 mg, 1 tablet / 8 h / if pain) and 0.12% chlorhexidine rinse (2 times / day / 7 days) were advised. A standardized periapical radiograph was performed immediately after the implant placement. The amount of Keratinized gingiva (KG) was recorded and also the stability values of the implant by using the Penguin® device (RFA values) to the implant and on the Permanent abutment.

• Prosthetic treatment: After 10 weeks up to 4 months, impressions were taken with fluid and heavy silicone (Zhermack® elite HD +) to make the provisional prosthesis, as long as the RFA values were greater than 65 ISQ. At the time of the temporary resin prosthesis placement, all the following clinical parameters (PD, mPI, mSBI, KG, BG, S, POI) were recorded and a periapical radiograph also taken. The definitive prosthesis was performed 4 weeks after the placement of the provisional. Records of clinical measures (BG, MT, mPII, mSBI, PD, KM) and periapical X-ray (periapical). clinical follow-up (MT, mPII, mSBI, PD), radiographic (periapical and orthopantomography) and RFA were evaluated 12 months later.

5. Radiographic evaluation X-rays were taken at the time of implant placement, 8-12 weeks after placement, after screwing the provisional rehabilitation and at 12 months. Radiographs were standardized by using an individualized radiographic stent for each patient, thus ensuring a parallel technique. (Figure 1 and 2) MBL measurements were performed by one examiner who recorded on each radiograph mesially and distally, the most coronal part of the bone crest (C), the position of the implant shoulder (H), and the level of the first peri-implant bone contact with the implant (Fi ) or abutment (Fa). Then, the examiner measured the distance in millimeters of H-C, which defined the crestal marginal bone level (MBLc), while the shoulder distance of Fi was the marginal bone level of the implant (MBLi). When the first contact was located in the abutment, the distance H and Fa was recorded as the marginal bone level of the abutment (MBLa). The distance MBLc was considered positive if the mark C was coronal to H, negative if C was apical, and zero if Fi and H coincided (Figure 3). The changes in MBLc (CMBLc) were registered at 12 months with respect to the baseline. Changes in MBLc, MBLi or MBLa (CMBLc, CMBLi, CMBLa) were measured in the same time period at 12 months.

6. Calibration The examiner, independent to the study, carried out the radiographic analysis using the Image J software (Java image processing program by Wayne Rasband; National Institutes of Health (NIH), USA) on periapical radiographs, with a x7 magnification. Previously, the examiner was calibrated 3 times separately, with an interval of 72 hours, making measurements at 10 radiographs to determine the intraoperator reproducibility. The aim was to obtain an intraclass coefficient of 0.99 (P <.05) as the intraoperator reliability coefficient.

7. Stability evaluation The resonance frequency analysis, RFA was recorded with the Penguin® system (Integration Diagnostics Sweden) at the time of implant placement, 10-12weeks and 1year.

8. Sample size Accepting an alpha risk of 0.05 and a beta risk of less than 0.2 in a bilateral contrast, 28 subjects were required in each group to detect a difference equal to or greater than 0.5mm. It was assumed that the standard deviation (SD) was 0.59 and a possible drop-out of 20% was estimated.

9. Statistical analysis Analysis was performed at implant level. In order to describe the qualitative variables, absolute frequencies and percentages were used. The description of quantitative variables was performed using the mean and SD. Normal distribution of each parameter was assessed by the Shapiro-Wilk test, and as data did not follow a normal distribution a Wilcoxon test was used to compare interproximal MBLs between baseline and 12 months follow-up, and Mann-Whitney U-test was used to compare interproximal MBL changes between treatment groups. The level of statistical significance was set at p < 0.05. The statistical package SPSS 22.0 (IBM, SPSS, SPSS Inc., Chicago, IL, USA) was used for the statistical analysis. ;

Related Conditions & MeSH terms

• Implant Site Reaction

• NCT number: NCT04230837
• Study type: Interventional
• Source: Universitat Internacional de Catalunya
• Status: Completed
• Phase: N/A
• Start date: January 2017
• Completion date: July 2019