Locked Versus Unlocked Set Screws in Intramedullary Fixation of Intertrochanteric Fractures

Hip Fractures Clinical Trial

Official title: Does Static Locking of Set Screws in Intramedullary Fixation of Intertrochanteric Fractures Prevent Shortening of Intertrochanteric Hip Fractures?

Status Terminated

Clinical Trial Summary

The purpose of this study is to look at the effect of locking or not locking a set screw when placing a rod and screws device in the thigh bone and hip to fix hip fractures. The set screw is an extra screw in the device that will not allow the screw that goes into the ball of the ball and socket joint in the hip to slide at all in relation to the rod in the thigh bone, which it goes through. It is not known whether it is better to lock the set screw (not allow sliding of the hip screw) or leave it unlocked (allow sliding of the hip screw). Participants in this study are patients with intertrochanteric hip fractures receiving standard care for this injury (lining the fracture up in a normal position and inserting a rod in the thigh bone with a screw that goes through the rod into the ball of the ball and socket of the hip). Patients who consent to participate will be randomized to one of two arms : 1. Set screw is unlocked or 2. Set screw is locked. Participants will all get standard postoperative care and standard postoperative xrays.

Clinical Trial Description

Intramedullary hip screw devices can be inserted with and without locking of the set screw, with the purpose of the set screw to minimize shortening of the femoral neck by rigidly positioning the head screw that inserts into the femoral head. Rigid locking of the lag screw may also limit the ability of the fracture fragments to compress against each other gradually with weight bearing and this potentially could reduce healing at the fracture site. Alternatively, more settling at the fracture site may allow more reliable healing while allowing more shortening of the femoral neck at the fracture site. Shortening of the femoral neck fracture can result in gait disturbances and poor hip function, while delay in healing can contribute to hardware failure and need for revision surgery. The benefit of placing the set screw in intramedullary hip screw fixation has not been clearly established in the literature. To date, there has been no study addressing this question, and the decision to lock, or not lock the screw is based on individual surgeon discretion. This study will help to clarify this decision point in the treatment of intertrochanteric hip fractures with the Intertan (Smith and Nephew, Memphis, Tn) intramedullary nail. This will lead to better patient outcomes, and help clarify the standard of care in these very common fracture patterns.

Subjects who have sustained an intertrochanteric hip fracture (OTA classification A2 and A3) will be randomized to undergo fixation with an intramedullary hip screw with and without locking of the set screw. These subjects will be blinded to the study group and will be treated as per standard of care after fixation of a hip fracture with xrays immediately after surgery, at 1-2 weeks, 6 weeks, and then 3 and 6 months post operatively. As per standard care additional xrays would be indicated until union of the fracture if there is delayed healing. Femoral neck shortening will be measured radiographically with femoral neck offset and the femoral neck shaft angle to be measured radiographically based on standardized computerized measurements from the xray images. TraumaCad software (Voyanthealth, Westchester, Il) will be utilized to obtain standardized measurements. A blinded subinvestigator will review the participants' x-rays and make the measurements required to determine the study outcomes. Time to radiographic union and any occurrence of hardware failure, nonunion and malunion will be noted. Demographic data including age, gender, smoking history, and medical comorbidities will be collected based on chart review. Subjective outcome scores (modified Harris hip score) will be collected at 3 and 6 months after surgery. ;

Related Conditions & MeSH terms

• Fractures, Bone
• Hip Fractures

• NCT number: NCT02345369
• Study type: Interventional
• Source: Bassett Healthcare
• Status: Terminated
• Phase: N/A
• Start date: January 2015
• Completion date: May 24, 2016