View clinical trials related to Femoral Fracture.
Filter by:Proximal femoral fractures commonly occur above 50 years and regional anesthesia could be a complement in the perioperative treatment of the patients. The use of pericapsular nerve group block (PENG Block) has been proposed to reduce pain. However, no studies have explored the efficient of the systemic analgesia associated with PENG Block in functional limitation in the preoperative period. In this sense, the main goal of this study is to evaluate the effectiveness of systemic analgesia associated with PENG Block in patients with proximal femoral fractures in the period preceding the surgical procedure.
This project consists of a prospective and retrospective case series design. Study candidates will include all patients 18 years or older, who were evaluated at UCSD and found to have a distal femur or femoral shaft fracture requiring surgical fixation. Patients who consent to study participation will recieve the RFN-advanced Retrograde Femoral Nailing System implant for fracture fixation. Data on functional status, healing rates, complication rates, and pain levels will be collected for each participant. After 3 years of data collection, investigators will analyze this data to provide further insight on the utility of this new design of retrograde femoral nails. Given the relatively high rate of complications, such as malalignment, with current femoral nail designs, it is imperative to evaluate novel systems to appropriately manage distal femur or femoral shaft fractures.
This project consists of a prospective case design. Study candidates will include all patients ages 18 and over who were evaluated at UCSD and found to have a critical-sized humerus, femur, or tibia segmental defect that would be fixed through surgery. Patients who consent to study participation will receive the TRUMATCH Graft Cage for their long bone segmental defect repair. Data on healing rates, complication rates, re-operation rates, time to return to normal activity, and pain levels will be collected for each participation. After 3 years of data collection, we will analyze this data to provide further insight on the utility of the TRUMATCH Graft Cage. Given the significant difficulty with repairing segmental long bone defects, it is imperative to evaluate novel systems to appropriately manage these injuries.
In February 2021, Altior Trauma Innovations™ announced that it had received 501(k) FDA approval for the Artemis Proximal Femoral Nail (PFN) System for internal fixation of intertrochanteric femur fractures. The objective of this pilot study is to evaluate safety, efficacy and feasibility of the Artemis PFN implant for operative fixation of intertrochanteric femoral fractures, compared to matched historical control patients who received other implants.
This is a prospective, multi-center, non-randomized, post-market clinical investigation of the Gamma 4 System. Neither subjects nor investigators are blinded to treatment. It is anticipated that a total of 100 subjects will be enrolled at five sites. Total duration of enrollment, 12 month follow-up and analysis is expected to take approximately 30 months. The clinical investigation has been designed to follow the surgeon's standard of care for subjects treated with a cephalomedullary nail for femoral fractures or and deformities, in addition to a 12 month follow-up visit. The primary endpoint of this clinical investigation is demonstration of bone consolidation by 12 months.
Thirty-seven patients diagnosed with femoral fracture to be treated with a compatible plate will be enrolled for this multicenter prospective interventional study. The Fracture Monitor T1 will be attached to the locking plate during osteosynthesis. Prior to discharge, it will be connected to an app installed either on the patients' smartphone or on the smartphone provided by the sponsor. The device will continuously collect and process data, which can automatically be downloaded via Bluetooth through the smartphone app and transferred in encrypted form to a dedicated cloud server. The smartphones will be equipped with a basic app version with rudimentary user interface that has no data visualization function. During the rehabilitation phase, data collected by the device will not be accessible to the surgeon nor the patient to ensure that no therapeutic decision will be made based on the acquired data. Every patient is treated as per standard of care. The primary objective of the study is to collect safety information of the Fracture Monitor T1. The secondary objectives are to collect information on device performance, device handling, and usability. All adverse events (AEs) and serious AEs (SAEs) will be recorded during the study. These will be reviewed and evaluated for their potential relationship to the device. All patients will be followed up for 6 months after the surgery according to the local standard of care. Given that the removal of the Fracture Monitor T1 may occur beyond 6 months, a safety follow-up will take place at the time point when the Fracture Monitor T1 is removed as per the instructions for use if it has not been removed within the 6 months. The results will be compiled into a clinical evaluation report to be submitted as part of the technical documentation for the conformity assessment procedure.
The Hospital Elder Life Program (HELP) has been shown to reduce delirium in hospitalized patients. In this study a family caregiver will apply the principles of the HELP program in a structured manner following training by a nurse clinical specialist in geriatrics. The effect of this intervention in decreasing delirium in older patients treated in an acute orthopedic unit for fractured femur following a fall will be evaluated.
The purpose of this study is to evaluate speed high intensity interval training (HIIT) walking program following an orthopedic trauma.
The use of cerclage wiring in the management of long bone fractures is common. With the increase in the placement of total hip ans shoulder prostheses, the occurrence of peri-prosthetic hip an shoulder fractures is also increasing, notably due to an older population. Whether it is for a fracture on a native femur or humerus, or on a periprosthetic hip or shoulder fracture, the use of cerclage wiring is an adjuvant additional but not the main means to ensure stable osteosynthesis, allowing re-loading and early rehabilitation of patients. This method has demonstrated its ability to improve the fixation of this fracture type, associated with osteosynthesis or hip/shoulder prosthesis revision surgery. However, metal cerclage expose to a risk of metallosis which can compromise bone fusion, injury to neighboring soft parts causing pain and also injury to the surgical team when handling them. More recently, non-metallic cerclage have been developed and could overcome certain risks associated with metallic cerclage, while ensuring their bone fixing capacity and therefore bone consolidation. Indeed, non-metallic cerclage could withstand similar or even greater stresses than metallic cables, in particular concerning their resistance to rupture. The "Sterile Self Locking Polymer Cerclage System" named OrthoLoop is a polymer cerclage which has been developed and could be used in these indications. Thus, this study (SERRE) aims to investigate the clinical results and sequelae of adjuvant cerclage wires OrthoLoop Cerclage in the management of rehabilitation, per prosthetic or primary femoral or humeral fractures compared with cerclages system used in standard care. SERRE is a 36 months follow up study in two arms : - Experimental group: "OrthoLoop cercalge" - Control group: "cerclages used in standard care" After each surgery, the patient follow-up period is 36 months. with 4 planned consultation visits after surgery at 6-8 weeks, 3, 6 and 36 months, with collection and measurement of the endpoints. The main objective of this study is to assess the role of "OrthoLoop cerclage" of COUSIN Biotech in comparison with cerclages (metallic for the majority) used in standard care ; in the optimization of the consolidation of primary and periprosthetic femoral or humeral fractures, 6 months after surgery.
The ADAPT system is a software that calculate a virtual 3D reconstruction of the femoral head without additional radiation. It automatically detects the used implant and its position relative to the femoral head, helping the surgeon to achieve an optimal proximal screw positioning in the femoral head. The investigators want to verify if with the addition of the ADAPT system the investigators can improve screw placement and reduce surgery time and radiation exposure.