Assessment of Anatomic, Physiologic and Biomechanical Characteristics of the Anal Canal and Pelvic Floor. An Observational Pilot Study

Fecal Incontinence Clinical Trial

Official title:

Assessment of Anatomic, Physiologic and Biomechanical Characteristics of the Anal Canal and Pelvic Floor. An Observational Pilot Study

Clinical Trial Details — Status: Completed

Administrative data

• NCT number: NCT02263170
• Other study ID #: KEK-BE: 048/2014
• Status: Completed
• Phase: N/A
• First received: October 1, 2014
• Last updated: November 23, 2015
• Start date: March 2015
• Est. completion date: November 2015

Study information

• Verified date: November 2015
• Source: University Hospital Inselspital, Berne
• Contact: n/a
• Is FDA regulated: No
• Health authority: Switzerland: Ethikkommission
• Study type: Observational

Clinical Trial Summary

With the project Smart Muscle for Incontinence Treatment (SMIT) a multidisciplinary consortium consisting of representatives ranging from clinical medicine via microelectronics towards biomaterial science aims to develop a novel implant to treat faecal incontinence. The aim of this campaign includes development of implantable prototype devices acting as artificial continence muscles using low-voltage electrically activated polymers (EAPs) controlled by implemented pressure sensors and the patient.

Subsequently, the knowledge of the anatomical and biomechanical properties of the anal sphincter complex are of cardinal importance. Most of the existing data on anatomy and physiology results is based on old studies and almost no data on biomechanical properties are available. However, new technologies or even merging data from different examination methods might provide new information in this field.

Description:

Background

Fecal incontinence (FI) is affecting self-confidence and can lead to social isolation and even loss of employment Often conservative treatment as the first option is ineffective and surgical interventions follow conservative are necessary.

Small defects of the anal sphincter muscles might be treated with sphincter repair and sacral neuromodulation (SNM) However, patients rarely become fully continent or short-term results deteriorate in the long term [1]. Those patients and patients with large defects are candidates for a neosphincter procedure (artificial bowel sphincter or graciloplasty). However, the success rate of these methods is limited and the explantation rate is high. A permanent colostomy associated with massive psychosocial impairment remains as ultimate treatment option With the project Smart Muscle for Incontinence Treatment (SMIT) a multidisciplinary consortium consisting of representatives ranging from clinical medicine via microelectronics towards biomaterial science aims to develop a novel implant to treat faecal incontinence. The aim of this campaign includes development of implantable prototype devices acting as artificial continence muscles using low-voltage electrically activated polymers (EAPs) controlled by implemented pressure sensors and the patient.

Subsequently, the knowledge of the anatomical and biomechanical properties of the anal sphincter complex are of cardinal importance. Most of the existing data on anatomy and physiology results is based on old studies and almost no data on biomechanical properties are available. However, new technologies or even merging data from different examination methods might provide new information in this field.

Accurate imaging data on the pelvic floor region is crucial for the development of a new, implantable device for restoration of fecal continence. Optimal size (inner, outer diameter, length) and geometrical shape (cylinder, cone, torus) adapted to different functional states (rest, squeezing, defecation) will improve function and prevent erosion and consequent infection of such a prosthesis.

With this study, the investigators aim to correlate three-dimensional endoanal ultrasonographic images with MRI images. The combination of different imaging techniques has been demonstrated to eliminate individual drawbacks of the examination methods and therefore would allow a precise description of the tissue [2]. The registered data with their complementary information would permit the distinct segmentation and three-dimensional presentations of the anatomical structures in the pelvic area. This information has a great potential to facilitate diagnostics and surgical planning in this region.

High-resolution anal manometry (HRAM) provides intra-anal pressure during rest or maximum pressure with high spatial and time resolution.

However Biomechanical properties of the anal canal as elasticity or stiffness (compliance or flexibility) of the tissue representing important parameters for a continence organ are not routinely evaluated in daily clinical practice. Functional Lumen Imaging Probe (FLIP) allows the measurement of a cross sectional area (CSA) with respect to applied luminal pressure, respectively. FLIP has the potential to be useful in order to assess the biomechanical properties of the sphincter region. Such information potentially gives new insights in physiology and pathophysiology of the continence process.

With this pilot study, the investigators aim to acquire anatomical and biomechanical data using established (manometry) and novel technologies (merging endoanal ultrasound and MRI data) in 20 healthy probands (10 male, 10 female).

Objective

Primary objective is to collect anatomical, physiological and biomechanical characteristics of the continence organ (sphincters and pelvic floor) in order to specify properties of a new implant for the treatment of faecal incontinence.

Secondary objectives are: test feasibility of FLIP in measuring the biomechanical properties of the anal canal and test feasibility of merging 3D US data and MR images.

Further this preliminary data will be used to plan an observational study comparing healthy probands and patients with incontinence.

Methods

For the assessment of the morphology ultra sound and MRI will be used, whereas FLIP (functional luminance imaging probe) and HRAM (high resolution anal manometry) are the modality of choice to investigate the biomechanical properties of the sphincter complex.

Recruitment information / eligibility

• Status: Completed
• Enrollment: 20
• Est. completion date: November 2015
• Est. primary completion date: November 2015
• Accepts healthy volunteers: Accepts Healthy Volunteers
• Gender: Both
• Age group: 60 Years and older

Eligibility

Inclusion Criteria:

• Informed Consent as documented by signature

• Absence of ano-rectal or pelvic floor symptoms (patient history, Wexner score and Longo's obstructed defecation syndrome (ODS) score =0. Appendix Constipation and Faecal Incontinence Score form)

• MRI safety (no metallic implants. Appendix MRI safety form)

• Normal weighted (20<BMI<30)

• Age = 60 years

Exclusion Criteria

• Other clinically significant concomitant disease states (e.g., renal failure, hepatic dysfunction, cardiovascular disease, etc.)

• Known or suspected non-compliance, drug or alcohol abuse

• Inability to follow the procedures of the study, e.g. due to language problems, psychological disorders, dementia, etc. of the participant

• age (<18 years old)

• history of complicated child delivery

• previous anorectal surgery

Study Design

Observational Model: Case-Only, Time Perspective: Cross-Sectional

Related Conditions & MeSH terms

• Fecal Incontinence

Intervention

Other:
• MRI (magnetic resonance imaging)
Assessment of the sphincter morphology
• US (ultra sound)
Assessment of the sphincter morphology
• FLIP (functional luminal imaging probe)
Assessment of the biomechanical properties of the sphincter region
• HRAM (high resolution anal manometry)
Assessment of the biomechanical properties of the sphincter region

Locations

Country	Name	City	State
Switzerland	Universitätsklinik für Viszerale Chirurgie und Medizin Bauchzentrum Bern (Inselspital Bern)	Bern

Sponsors (5)

Lead Sponsor	Collaborator
University Hospital Inselspital, Berne	Nano-Tera.ch, Lausanne, Spitäler Schaffhausen, University of Basel, University of Bern

Country where clinical trial is conducted

Switzerland, 

Outcome

Type	Measure	Description	Time frame	Safety issue
Primary	Sphincter morphology	Functional sphincter variables are: anal canal length, resting, squeeze, and relaxation pressures, squeeze time, anal pressure in response to coughing, RAIR (percentage of anal relaxation), rectal volume filling to first sensation, urge and maximal tolerable volume, and distension of the anal canal in response to different filling volumes. Anatomical parameters are: distinction between internal and external sphincter (yes/no), sphincter lengths, sphincter thickness, and sphincter volumes.	At baseline	No
Secondary	Test feasibility of FLIP in measuring the biomechanical properties of the anal canal	Test the ability of FLIP in order to assess the biomechanical properties of the human anal sphincter complex in sufficient quality	At baseline	No
Secondary	Test feasibility of merging 3D US data and MR images	Test feasibility of merging 3D US data and 3D MR images (full body MR and endoanal coil MR) in order to get a more precise anatomical image at once	At baseline	No

External Links

•   Link