Clinical Trial Details
— Status: Not yet recruiting
Administrative data
NCT number |
NCT06226870 |
Other study ID # |
NSRCT versus VPT |
Secondary ID |
|
Status |
Not yet recruiting |
Phase |
N/A
|
First received |
|
Last updated |
|
Start date |
May 2024 |
Est. completion date |
April 2025 |
Study information
Verified date |
March 2024 |
Source |
Minia University |
Contact |
Ahmed M Abdelaal, M.SC. |
Phone |
00201000394466 |
Email |
ahmedabdelaal2012[@]gmail.com |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
Pulpitis is the pulpal inflammation in response to irritants which are either microbial,
chemical, or physical (mechanical and thermal) in origin. Clinically, pulpitis is termed as
reversible or irreversible, whereas histologically, it is described as acute, chronic or
hyperplastic . Pulpitis is considered reversible when the pulp can heal following
conservative management . For such cases, a coronal pulpotomy is considered as a definitive
treatment option having 78% to 90% of success rate . In irreversible pulpitis (IP), the pulp
is not capable of healing, thus it is treated traditionally complete pulpectomy.
Description:
I- Intervention
- Diagnosis to reach definitive diagnosis of SIP (positive response to pulp sensibility
test) associated with SAP (PAI score ≤ 3), a detailed history and clinical examination
should be collaborated with the radiographic evidence (CBCT) of apical periodontitis.
- Endodontic procedures
- Anesthetic protocol:
Tooth will be anaesthetized using 3.6 ml of 2% lidocaine with 1:100,000 epinephrine.
Inferior alveolar nerve block (IANB) supplemented by buccal infiltration will be accomplished
using a standard aspirating syringe and a 27-G, long needle (C-K ject, CK Dental, Korea).
Access cavity preparation:
After rubber dam isolation, the tooth surface will be cleaned with gauze soaked in 5.25%
sodium hypochlorite before the procedure.
All undermined tooth structure and caries will be removed with a diamond bur (komet, komet
Dental, Germany) mounted on a high-speed handpiece.
Conventional access cavity will be performed by using round diamond bur (komet, komet Dental,
Germany) for initial penetration. While Endo-Z (Prima Dental Group, UK) will be used for wall
refinement to establish a straight-line access to canal orifices.
Preparation of the pulp chamber:
Immediately after access cavity preparation, any pulp tissue in the pulp chamber will be
eliminated followed by cleansing with full concentration of sodium hypochlorite (6% NaOCl).
NSRCT group
- Patency Root canal patency will be established using a stainless-steel ISO size 10 K
file (M. access, Dentsply, Switzerland).
- Working length determination The working length will be determined using an electronic
apex locater (Tri Auto-ZX, J Morita, Japan) and re-confirmed by a digital intraoral
periapical radiograph.
- Glide path Micro glidepath will be established using a stainless-steel ISO size 10 and
15 K manual files followed by macro glidepath using ProGlider® glide path rotary File.
- Root canal preparation The canals will be instrumented using Pro Taper Next® rotary
files mounted on a torque controlled endodontic motor , in a continuous rotation motion,
while torque and speed will be adjusted according to manufacturer instructions.
- Irrigation protocol During instrumentation Instrumentation will be supplemented with a
copious irrigation of 2 ml of 6% NaOCl between each file and another delivered using a
30-gauge side-vented closed end irrigation neddle.
Final irrigation protocol An alternate use of 10 mL of 6% sodium hypochlorite and 10 mL of
17% EDTA for each canal, with an intermediate rinse with the same volumes of normal saline
will be accomplished.
• Root canal obturation All canals will be dried using sterile paper points (ProTaper Next
paper points .
Obturation will be done using a single cone technique with a bioceramic sealer .
VPT group All procedures will be carried out according to the guide-lines of the American
Association of Endodontists (AAE) in 2021 for vital pulp therapy.
Haemostasis will be achieved with application of a cotton pellet moistened with 2.5% NaOCl
for 2 min on which dry cotton pellet will be further placed. If required, the haemostasis
will be carried out for another 6 minutes. In circumstances where the haemostasis still will
not be achieved, the tooth will be excluded from the study.
Once the bleeding will be controlled, Biodentine will be mixed according to the
manufacturer's instructions and will be placed in a 3-mm layer above the pulp tissue using an
amalgam carrier and gently packed using a condenser . A layer of light-cure RMGIC will be
placed over the pulpotomy agent and light-cured for 20s.
VPT with PRF group All procedures will be carried out according to the guide-lines of the
American Association of Endodontists (AAE) in 2021 for vital pulp therapy.
Access cavity preparation and haemostasis will be carried out as mentioned previously, then
PRF will be prepared by drawing the required amount of blood into a 10-mL test tube without
an anticoagulant and centrifuged immediately using a table top centrifuge machine for 12 min.
The resultant product consisted of the following three layers:
1. A cellular platelet poor plasma at the top of the tube.
2. Fibrin clot (PRF) in the middle of the tube.
3. Red blood corpuscles at the bottom of the tube. PRF will be obtained in the form of a
membrane by squeezing out the fluids in the fibrin clot.
After that, the PRF membrane will be placed over the amputated pulp by using sterile
tweezers. Biodentine will be will be placed in a 3-mm layer above the PRF gently packed using
a condenser then a layer of light-cure RMGIC will be placed over the PRF and Biodentine then
light-cured for 20s as mentioned in the previous group .
• Permanent restoration For all groups, the access cavity will be sealed with an appropriate
post endodontic restoration within one week after root canal filling.
II. Outcome assessment:
Clinical evaluation and radiographic evaluation.