Clinical Trials Logo

Clinical Trial Details — Status: Completed

Administrative data

NCT number NCT03691285
Other study ID # PI087-2017
Secondary ID
Status Completed
Phase N/A
First received
Last updated
Start date April 9, 2017
Est. completion date July 30, 2019

Study information

Verified date April 2020
Source Universidade Federal de Goias
Contact n/a
Is FDA regulated No
Health authority
Study type Interventional

Clinical Trial Summary

The aim of this study is to assess the cost-effectiveness of the mandibular overdenture retained by one and two implants, based on a randomized clinical trial.


Description:

This randomized clinical trial alongside a cost-effectiveness analysis will include 48 edentulous individuals who meet eligibility criteria. New maxillary and mandibular dentures will be fabricated for all participants following a standardized protocol. Then, participants will be randomized into one of the treatment groups: mandibular overdenture retained by two implants group or single-implant mandibular overdenture group. Each participant allocated to the single-implant mandibular overdenture group will then receive a Straumann® Standard Plus SLActive® regular neck implant (Straumann 0.33.051S/052S/053S Institute Straumann AG, Basel, Switzerland) in the mandibular midline, and the mandibular overdenture retained by two implants group will receive two implants of the same specification, in the interphoramen region. A healing abutment will be connected and the implant will be allowed to heal for approximately 3 weeks. Then, a 3.4mm retentive titanium anchor abutment (Straumann 048.439, Institute Straumann AG, Basel, Switzerland) will be connected and tightened to 35 N.cm with a torque wrench. The matrix will be incorporated to the denture using self-curing acrylic resin and the patient will be instructed to keep the upper and lower dentures firmly occluded in the habitual position until the final polymerization of the resin. Outcomes (satisfaction with the dentures and oral health-related quality of life) will be measured at baseline and at the 6- and 12-month follow-up. Direct costs related to therapies in both groups will be identified, measured and valuated for one year after treatment. Incremental cost-effectiveness ratios will be estimated and graphically presented on cost-effectiveness planes. Sensitivity analysis on the most important assumptions will be performed in order to assess the robustness of the model.


Recruitment information / eligibility

Status Completed
Enrollment 47
Est. completion date July 30, 2019
Est. primary completion date July 30, 2019
Accepts healthy volunteers Accepts Healthy Volunteers
Gender All
Age group N/A and older
Eligibility Inclusion Criteria:

- No contraindications for implant surgery (mainly related to uncontrolled systemic diseases)

- Present enough bone volume in the mandibular midline area for implant placement without the need of bone augmentation procedures.

- Be able to understand and answer the questionnaires used in the study

- Agree to participate by providing a written informed consent.

Exclusion Criteria:

- Noncompliant participants

- Individuals who do not agree to be randomly allocated to the treatment study group

- Presence of signs of untreated temporomandibular disorders, uncontrolled systemic or oral conditions that require additional treatments

Study Design


Related Conditions & MeSH terms


Intervention

Procedure:
Mandibular Overdenture
Placement of 1 or 2 implants in the anterior region of the edentulous mandible.

Locations

Country Name City State
Brazil School of Dentistry, Federal University of Goias Goiania Goias

Sponsors (1)

Lead Sponsor Collaborator
Universidade Federal de Goias

Country where clinical trial is conducted

Brazil, 

Outcome

Type Measure Description Time frame Safety issue
Primary Satisfaction with the dentures A 100 cm graduated visual analogue scale will be used in order to assess the participants' ratings of their satisfaction with the upper and lower dentures in relation to the parameters "general satisfaction", "comfort", "stability", "aesthetics", "ability to speak" and "ability to chew". Each participant will indicate their level of satisfaction with each parameter by marking a point along the scale, in which ends mean "unsatisfied" and "satisfied", as it is closer to the beginning or the end of the scale, respectively. Changes from baseline to 12 months after the intervention
Secondary Masticatory efficiency Masticatory efficiency will be assessed as a secondary outcome using a two-colored chewing gum test and a qualitative and quantitative colourimetric method to measure the color-mixing ability. Participants will be asked to sit upright in a dental chair and to chew the gum on their preferred chewing side for 20 cycles. Visual and electronic analysis of the chewed gums samples will be done according to the classification proposed by Schimmel et al. Analysis will be made by two investigators blinded to the study groups and treatment stage. The software ViewGum (dHAL Software, Kifissia, Greece, www.dhal.com) will be used for electronic colourimetric analysis. Changes from baseline to 12 months after the intervention
Secondary Pain and discomfort A 100 cm graduated visual analog scale will be used to evaluate participants' assessments of pain and discomfort regarding the surgical process. Each participant will indicate their level of pain and discomfort with each parameter by marking a point along 24 hours, 7 days and 21 days after surgery
Secondary Oral health-related quality of life impacts The cross-culturally adapted Brazilian version of the Oral Health Impact Profile for edentulous subjects (OHIP-EDENT) will be used. It contains 19 items divided in four different subscale domains: (I) masticatory discomfort and disability (four items), (II) psychological discomfort and disability (five items), (III) social disability (five items), and (IV) oral pain and discomfort (five items). The items are answerable by a 3-point Likert scale and responses will be summed to result an overall score. Higher scores represent worse OHRQoL. Changes from baseline to 12 months after the intervention
See also
  Status Clinical Trial Phase
Active, not recruiting NCT04984499 - In Vivo Clinical Investigation of the Safety and Performance of Dental Implants TBR® Tissue Level Z1
Completed NCT01411683 - Mandibular Overdentures Retained by Conventional or Mini Implants N/A
Completed NCT04853459 - A Technique for Border Molding in Complete Dentures Using Light-Cured N/A
Completed NCT01230320 - Simplified vs. Conventional Methods for Complete Denture Fabrication N/A
Completed NCT05614635 - Safety and Technical Performance of Plastalgin and Plastalgin Fast in Patients Requiring a Dental Impression
Active, not recruiting NCT05599269 - Retrospective Clinical Evaluation of Nano-hybrid-composite Denture Teeth N/A
Not yet recruiting NCT03674554 - Prosthetic Complications of Screw Retained Restoration N/A
Not yet recruiting NCT06155630 - 3D Printing for the Fabrication of Mandibular Implant Overdentures N/A
Active, not recruiting NCT02117856 - Complete Lower Dentures on 1 or 2 Implants N/A
Not yet recruiting NCT06393582 - Accuracy Evaluation of Implant Impressions: A Prospective Study N/A
Recruiting NCT05375045 - Real-life Evaluation of the Safety and Performance of EUROTEKNIKA Dental Implants
Recruiting NCT06255522 - Clinical and Anatomical Factors Influencing Accuracy in Fully Guided Implant Placement. N/A
Completed NCT04760457 - Mandibular Overdentures Retained by Mini Implants: a Clinical Trial Comparing Different Surgical and Loading Protocols N/A
Completed NCT03126942 - Single-implant Overdentures Retained by the Novaloc Attachment System N/A
Enrolling by invitation NCT05441527 - Use of Two Dissolvable Therapeutics Under Removable Partial Dentures N/A
Completed NCT03056976 - Cost-effectiveness of Implant Treatment for the Edentulous Mandible N/A
Completed NCT04475913 - Digital vs Analog Impression in Cases of All-on-4 - Prosthesis N/A
Recruiting NCT03536468 - Psychological Impact of Tooth Loss
Completed NCT03048812 - Attachment Types for Single-implant Mandibular Overdentures: a Crossover Clinical Trial N/A
Recruiting NCT02339194 - Application of a Simplified Method of Complete Denture Fabrication for Severely Resorbed Mandibular Ridges Phase 3