Clinical Trials Logo

Clinical Trial Summary

Bone marrow aspiration from maxillary tuberosity will be centrifuged to separate the bone marrow mononuclear cell layer using the density gradient separation method, then it will be seeded in a platelet-rich fibrin membrane and used for socket preservation to test the osteogenic ability of the bone marrow mononuclear cell layer in comparison to platelet-rich fibrin alone both ways will receive implant after 3 months


Clinical Trial Description

-Research question: In patients with teeth requiring extraction will bone marrow mononuclear cell layer (BMMNC) from maxillary tuberosity seeded on platelet-rich fibrin (PRF) maintain the bucco-palatal/lingual bone dimension during socket preservation compared to platelet rich fibrin alone? -The rationale for conducting the research: Bone marrow is full of progenitors and cell markers that promote tissue healing. Traditionally bone marrow aspiration is done from extra-oral sites. The obstacle in extra-oral aspiration is the site morbidity and the need to put the patient under general anesthesia. Intraoral sites like the maxillary tuberosity are filled with marrow spaces that can facilitate the harvesting of marrow cells and reduce the trauma of the harvesting process. Bone marrow mononuclear cell (BMMNC) transplantation may result in higher rates of bone marrow regeneration in the extraction socket and significantly accelerate bone maturation. It is also suggested that Bone marrow mononuclear cell (BMMNC) plays an important role in bone homeostasis within the extraction socket However, Bone marrow mononuclear cell (BMMNC) has several drawbacks that should be taken into consideration like potential pain during harvest, and variable stem cell quantity and quality depending on age which may hinder the usage of Bone marrow mononuclear cell (BMMNC) in old ages. The bone regeneration ability of that population of cells and the ease of their acquisition render them good candidates for socket preservation. Hence, the current study aims to evaluate the use of Bone marrow mononuclear cells (BMMNC) obtained from the maxillary tuberosity in promoting bone formation in the alveolar socket after extraction. -The explanation for the choice of comparators: A parallel group of 12 patients with a non-restorable tooth will undergo extraction and socket preservation. - In group 1: socket preservation will be done by PRF PRF membrane used in the extraction sockets was demonstrated to promote local soft tissue healing of gums and reduce postoperative pain response. While the effect of PRF to reduce alveolar bone resorption was not significant, PRF was able to increase the quality of the novel bone and enhance the rate of bone formation due to the concentration of growth factors - In group 2: sock preservation will be done by Bone marrow mononuclear cell (BMMNC) from the maxillary tuberosity on PRF In the current study, the density gradient separation method technique will be used to harvest BMMNC. This method has been used to enrich the isolated mononuclear cell fraction and has been an essential part of several clinical procedures. The density gradient separation/immediate transplantation method is superior to the in vitro expansion method as the cells are minimally manipulated; there is no invasive enzymatic treatment used. This method allows immediate autologous transplantation of BMAC that minimizes the risk of contamination by decreasing the time of cell handling in cell culture -Objectives: The objective of the study is to find out the osteogenic potential of BMMNC from the maxillary tuberosity in comparison with PRF alone in socket preservation for delayed implant placement -Trial design: The current study will be designed as a: - Parallel 2 arm - Randomized Controlled Clinical Trial, - Allocation ratio 1:1 - Superiority Trial - Methods . Interventions - Preoperative evaluation: - Clinical examination & informed consent: Evaluation of the patient's general condition of the oral cavity, to make sure it complies with the criteria required to be enrolled in the study in terms of oral hygiene, pathological conditions -Radiographic examination: Cone beam CT will be taken before proceeding with any procedure to make sure of the restorability of the tooth before extraction, checking for any radiolucency to be removed also to measure bone width before extraction - Surgical procedures: - Local anesthesia will be administered by infiltration or nerve block to achieve the necessary anesthesia to allow extraction of the indicated tooth - Extraction will be done as atraumatically as possible removing any pathosis found that may interfere with bone formation - Allocation concealment will be broken and socket preservation will be done In group 1 - A trapezoidal flap will be created above the extraction socket to allow closure of the surgical site. - PRF will be placed in the socket - The flap will be closed by interrupted sutures using 5-0 sutures. In group 2 (test group) - A trapezoidal flap will be created above the extraction socket to allow closure of the surgical site. - BMMNC will be seeded on platelet-rich fibrin and inserted into the socket - The flap will be closed by interrupted sutures using 5-0 sutures. BMMNCs aspiration and centrifugation technique: - Under the supervision of professor: Hani el Nahass and doctor: Omnia k Tawfik A 20 gauge needle will be inserted in the maxillary tuberosity area through the palatal aspect until aspiration is positive - Aspirate will be collected in a heparin-treated tube (2000:1) using 1ml of anticoagulant citrate dextrose solution (ACD-A) for every 15ml of bone marrow aspiration. - Aspirate will be centrifuged to separate the BMMNCs using the density gradient separation method. - Ficoll® Paque Plus (GE Healthcare, Buckinghamshire, UK) bottle will be inverted several times to ensure thorough mixing and 3 ml of the media will be added to a centrifuge tube - The bone marrow aspirate will be diluted (1:1) with saline and then carefully layered onto the Ficoll gradient and then centrifuged at 2000 rpm for 20 min at room temperature using a multi-speed 4000 rpm vertical rotor. - The upper layer containing plasma and platelets will be collected using a sterile pipette, leaving the mononuclear cell layer undisturbed at the interface. The layer of mononuclear cells will be transferred to a sterile centrifuge tube using a sterile pipette. - Postsurgical procedure (three months after socket preservation) - Local anesthesia will be administered by infiltration or nerve block to achieve the necessary anesthesia - A flap will be raised at the site of the extracted tooth - A core biopsy will be harvested by introducing a core drill bit in place of an initial drill - Sequential drilling will take place to prepare osteotomy to the right size to receive an implant - Implant will be placed in the osteotomy with the platform flush with the bone - Flap closure will be achieved by interrupted 5-0 sutures Histologic processing: The harvested bone biopsies will be decalcified in ethylene diamine tetra acetic acid (10%) for two weeks. After dehydration in graded series of ethanol, the specimens will be embedded in paraffin and sectioned by a high-speed rotating blade microtome; the sections will be stained with hematoxylin-eosin stain. This will be followed by histomorphometric analysis using the Leica Qwin 500 (Leica microsystems Inc., Switzerland) image analyzer computer system (England). Area percentage (%) of newly formed bone will be calculated Quantitative real-time polymerase chain reaction (qRT-PCR) real-time polymerase chain reaction(RT-PCR) will be used to analyze the massenger Ribonucleic acid (mRNA) levels of alkaline phosphatase • Postoperative instructions and follow-up: Administration of: - Antibiotics (Amoxicillin 1g twice daily for 5 days) to prevent any chance of infection. (Eugenio Romeo et al, 2014). - Anti-inflammatory drugs (NSAIDS; Ibuprofen 600mg three times daily for 5 days) to avoid any chance of edema or pain or swelling - Antiseptic mouth rinse (0.12% Chlorhexidine oral rinse will be prescribed for 60 seconds two times a day for 14 days. - The patient will be instructed to follow up for the next 3 months before implant placement Patient self-care instructions: - Application of an ice bag to the treated area for the first 24 hours. - Avoid any brushing and trauma to the surgical site for one week. - Avoid smoking - Outcomes: PICO:(population-intervention-compatetor-outcome) P: Patients with non-restorable teeth indicated for extraction I: BMMNC from the tuberosity for socket preservation C: Platelet rich fibrin O: Bucco-palatal/lingual bone dimension Prioritization of Outcome Outcome Method of Measurement Unit of Measurement Primary outcome Secondary objectives To calculate the postoperative pain, patient satisfaction and Alkaline phosphatase measurement in a histological sample of the newly formed bone took 3 months later before implant placement ;


Study Design


Related Conditions & MeSH terms


NCT number NCT05465421
Study type Interventional
Source Cairo University
Contact Ahmed I Yassin
Phone 002 01063718668
Email ahmedyassin2167@gmail.com
Status Recruiting
Phase N/A
Start date May 1, 2022
Completion date May 1, 2023

See also
  Status Clinical Trial Phase
Completed NCT05167123 - Pulp Capping in Primary Molars Using TheraCal (LC) Phase 4
Not yet recruiting NCT04933409 - 3D Printed Donor Tooth Replica in Autotransplantation of Teeth N/A
Not yet recruiting NCT04738526 - One Year Clinical Evaluation of Shade Matching and Patient Satisfaction of New Gradient Technology Monolithic Zirconia (5Y-TZP\3Y-TZP) Compared to Lithium Disilicate Crowns in Dental Esthetic Zone N/A
Completed NCT05252689 - Clinical Evaluation of Teeth Prepared With Vertical Preparation Versus Deep Chamfer N/A
Recruiting NCT04817852 - Morphological Root Canal Variation in C-shaped Canal Will be Assessed for Age by Using Cone Beam Computed Tomography N/A
Recruiting NCT04735120 - Laser Activation in Reducing Pain During and After Root Canal Treatment for Painful Lower Molar Teeth. N/A
Completed NCT04620174 - Custom-made Versus Prefabricated Zirconia Crowns for Primary Molars. N/A