Clinical Trials Logo

Clinical Trial Summary

Coagulation within the dialyzer membrane fibres is an obvious biological sign of bio-incompatibility. To avoid clotting during extracorporeal treatment, an anticoagulant is added to the circuit, resulting in an increased risk for bleeding complications.

In addition, there is evidence that a substantial number of fibers can become blocked before this is reflected in routinely observed parameters, or in termination of the dialysis session. Little is known about the impact of such subclinical clotting on dialyzer performance in terms of solute clearance.

Membrane clogging due to deposition of proteins and red blood cells on the dialysis membrane may influence both the diffusive and convective transport characteristics of the dialyzer membrane before leading to complete dialyzer clotting.

In 2018, the invesitgators described a method to objectively count the number of blocked fibres inside a dialyzer using a micro-CT scanning technique.

In the present trial, the investigators use this method to assess the resistance of the dialyzer to clotting, and to evaluate the impact of subclinical fibre blocking on solute removal and thus performance of a dialyzer during a dialysis session.

The aim of this randomized cross-over study is to objectively quantify the performance of different dialyzer membranes: ATA™ membrane in the Solacea™ dialyzer, polysulfone membrane in the FX800 dialyzer, and the heparin-coated AN membrane in the Evodial dialyzer, and this with different anticoagulation strategies.


Clinical Trial Description

This single centre, randomized cross-over study includes ten consecutive stable chronic hemodialysis (HD) patients who experienced stable dialysis sessions during the last 4 weeks, and had no known coagulation disorder, active inflammation or malignancy.

Double-needle vascular access is achieved through a native arterio-venous fistula or a well-functioning double lumen tunnelled central venous catheter.

In a first test series, each patient is dialyzed for 240min (at midweek) in 4 different regimens, randomly using 2 different dialyzers and 2 different anticoagulation schemes. Patients receive their regular brand of Low-Molecular-Weight Heparin anticoagulation at the beginning of the dialysis session, and this randomly either at their regular dose (full dose 1/1) or at only 50% of their regular dose (half dose 1/2). All test sessions are performed with blood flow at 300mL/min and dialysate flow at 500mL/min in post dilution hemodiafiltration (HDF) mode (substitution flow 75mL/min). Ultrafiltration rates is set according to the patient's interdialytic weight gain and clinical status:

1. ATA™ Solacea 19H - HDF - 1/1 anticoagulation

2. ATA™ Solacea 19H - HDF - 1/2 anticoagulation

3. polysulfone FX800 - HDF - 1/1 anticoagulation

4. polysulfone FX800 - HDF - 1/2 anticoagulation

During the 4 experimental midweek sessions, blood is sampled from the arterial and venous blood lines, and spent dialysate is sampled from the outlet line, all at 60min after the dialysis start. Blood samples are immediately centrifuged and serum and dialysate are stored at -80°C until batch analysis.

Concentrations of urea, kappa and lambda free light chains, and myoglobin are determined. Extraction ratios and adsorption on the membrane are calculated from concentrations.

At the end of the dialysis session, a standard rinsing procedure of the hemodialyzer is performed using exact 300mL rinsing solution. Next, the hemodialyzer is dried using continuous positive pressure ventilation. Dialyzer fibre blocking is visualized in the dialyzer outlet potting using a 3D CT scanning technique on micrometer resolution. HECTOR is a High Energy CT scanner Optimized for Research, built by the Ghent University Centre for X-ray Tomography (UGCT) in collaboration with the UGCT spin-off company XRE (Gent, Belgium). In front of the X-ray source, the dialyzer is mounted vertically on a precision rotation stage, and radiographies were recorded over 360° with an angular interval of 0.15°. Scan conditions are optimized to maximize the signal-to-noise ratio based on the sample size and structure, and the scanner properties. The tube voltage is set at 80kV, at a power of 20 Watts, the maximal power that allowed imaging at a resolution of 25µm. A total of 2401 projections are recorded with 500ms exposure each, resulting in a total exposure time of 20 minutes. Acquired images at 0 (projection 1) and 360° (projection 2401) are compared to exclude movement of the hemodialyzer during the scanning process. Reconstruction of the raw projection data is performed with the Octopus Reconstruction software package, licensed by XRE23.

Fibers are counted in the central cross-section of the dialyzer outlet potting in a computer-based way using the Fiji image processing toolkit of ImageJ analysis software (ImageJ 1.51H, NIH, Bethesda, USA), an open-source platform for biological-image analysis.

In a second test series in 10 stable HD patients, no blood sampling is performed but dialyzers are scanned post dialysis. The following different dialyzers in HD modus at midweek are tested:

1. ATA™ Solacea 19H - HD - 1/1 anticoagulation

2. ATA™ Solacea 19H - HD - 1/2 anticoagulation

3. polysulfone FX800 - HD - 1/1 anticoagulation

4. polysulfone FX800 - HD - 1/2 anticoagulation

5. polysulfone FX800 - HD - 1/2 anticoagulation - with predialysis albmuin priming of the membrane

6. Evodial - HD - no anticoagulation

7. Evodial - HD - no anticoagulation - with predialysis albmuin priming of the membrane

In a third test series in 10 stable HD patients, no blood sampling is performed but dialyzers are scanned post dialysis. The following different dialyzers at midweek are tested:

1. ATA™ Solacea 19H - pre dilution HDF (substitution 150mL/min) - 1/4 anticoagulation

2. ATA™ Solacea 19H - post dilution HDF (substitution 75mL/min) - 1/4 anticoagulation

3. ATA™ Solacea 19H - HD - 1/4 anticoagulation

4. ATA™ Solacea 19H - pre dilution HDF (substitution 150mL/min) - no anticoagulation

5. ATA™ Solacea 19H - post dilution HDF (substitution 75mL/min) - no anticoagulation

6. ATA™ Solacea 19H - HD - no anticoagulation

First outcome measure: relative number of open fibers in each tested dialyzer. Second outcome measure: dialyzer performance (extraction ratio, adsorption). ;


Study Design


Related Conditions & MeSH terms


NCT number NCT03820401
Study type Interventional
Source University Hospital, Ghent
Contact
Status Completed
Phase N/A
Start date March 7, 2018
Completion date January 17, 2019

See also
  Status Clinical Trial Phase
Recruiting NCT04892745 - Impact of Hemodialysis on Cutaneo-muscular Electrical Impedance
Not yet recruiting NCT04925674 - Study of HEC53856 in Patients With Subjects With End-Stage Renal Disease Receiving Dialysis. Phase 1
Active, not recruiting NCT03183245 - Comparison of the Human Acellular Vessel (HAV) With Fistulas as Conduits for Hemodialysis Phase 3
Completed NCT03365635 - Administration of Zepatier (Grazoprevir Plus Elbasvir) in Chronic Hemodialysis (HD) Patients With Hepatitis C Phase 4
Withdrawn NCT02904343 - Evaluation of Domestic Hemodialysis Machine: A Multi-center Clinical Study N/A
Withdrawn NCT01855334 - L-Arginine and Spironolactone Trial in Dialysis-Dependent ESRD Phase 4
Completed NCT01700465 - Estimating and Predicting Hemodynamic Changes During Hemodialysis N/A
Recruiting NCT01195519 - The Assessment of Quality of Life in Patients With Peritoneal Dialysis and Hemodialysis N/A
Completed NCT00737672 - GORE VIABAHN Endoprosthesis Versus Percutaneous Transluminal Angioplasty (PTA) to Revise AV Grafts in Hemodialysis Phase 3
Completed NCT00527774 - Effect of HCV Infection on Insulin Resistance and Malnutrition-inflammation Complex Syndrome in Regular Hemodialysis Patients N/A
Completed NCT00942253 - Exercise Training in Dialysis Patients With Restless Legs Syndrome (RLS) Phase 2
Completed NCT00850252 - Use of a Lifeline Graft in the A-V Shunt Model Phase 1/Phase 2
Completed NCT00224081 - DRIVE Trial (Dialysis Patients' Response to Intravenous [IV] Iron With Elevated Ferritin) Phase 4
Completed NCT00776750 - Influenza Vaccination in Hemodialysis Patients and Renal Transplant Recipients Phase 4
Withdrawn NCT03664141 - Impact of Cannabis Oil on Nutrition in Hemodialysis Patients Study (ICON-HP Study) Phase 3
Completed NCT03909698 - Antibiotic Dosing in Patients on Intermittent Hemodialysis
Recruiting NCT03311321 - Vitamin K to Slow Progression of Cardiovascular Disease Risk in Hemodialysis Patients N/A
Recruiting NCT06098924 - HD Patients' Depression and Happiness
Recruiting NCT03419923 - Three Anticoagulation Strategies for Hemodialysis in Patients at Risk of Hemorrhage N/A
Completed NCT03470727 - The Effect of Citrate Dialysate on Clot Formation and Anemia in Hemodialysis Patients N/A