The Evaluation of the Roles of New Cardiac Imaging in Patients With Chest Pain

Cardiology Clinical Trial

Official title: The Role of Computed Tomography-Derived Fractional Flow Reserve (CT-FFR) and Myocardial Computed Tomographic Perfusion (CTP) in Patients Presenting With Chest Discomfort

Status Terminated

Clinical Trial Summary

This is a prospective, observational study designed to evaluate the role of dynamic computed tomographic perfusion (CTP) and Computed Tomography-Derived Fractional Flow Reserve (CT-FFR) in patients presenting with chest discomfort.Patients with lesions greater than 50% and who meet all other inclusion/exclusion criteria will qualify to be a subject in the CTP study /CT-FFR 49. Those who agree to participate will be scheduled to have the CT-FFR and CTP performed within sixty days of the initial Coronary CTA procedure. A CTA will be performed at rest for FFR. The patient will then take approximately a 30 min break. Regadenoson will then be administered and the dynamic CT procedure will be done for perfusion. If patients are deemed to be appropriate for invasive angiography by the referring physician, coronary lesions between 40% and 80% will get a fractional flow measurement performed if indicated on a clinical basis. Stenosis in vessels less than 1.5 mm will be excluded from the study. The CT-FFR and CTP will be performed in these patients within 60 days of index coronary angiography.

Clinical Trial Description

Coronary artery computed tomographic angiography (CCTA) is a widely used, highly accurate technique for the detection of coronary artery disease (CAD), with sensitivity and negative predictive values of over 90% 1-4. Patients with normal CCTA findings have an excellent prognosis and do not require further testing for CAD 5. However, like invasive coronary angiography (CATH), CCTA is an anatomic test and, cannot reliably predict the impairment of flow (functional significance) of Coronary stenoses. For this reason, in approximately 15-25% of patients, additional functional testing may be required after CCTA, usually in the form of stress testing 6-8. Stress testing is commonly done by exercise or pharmacologic stress with electrocardiographic monitoring and often, imaging of myocardial perfusion by nuclear scintigraphy (MPI) or detection of abnormal contraction by echocardiography. Furthermore, in patients with previously known CAD, CCTA alone is not an adequate test, because in most cases there are multiple lesions that are possible sources of ischemia. Over the last two decades the number of abnormal stress studies have decreased substantially from 40.9% in 1991 to 8.7% in 20099. This underscores the need for an accurate mechanism to identify which patients best benefit from invasive angiography. Myocardial Computed Tomographic Perfusion (CTP) and Computed Tomography-Derived Fractional Flow Reserve (CT-FFR) have emerged as promising ways to identify ischemia when there is coronary disease identified by CCTA. The two tests provide different and perhaps complimentary information. Fractional Flow Reserve (FFR) measures the difference in flow created by a coronary stenosis before and after the administration of a vasodilator agent by measuring the drop in pressure across the stenosis. Coronary Flow Reserve (CFR) measures flow at maximum vasodilation versus flow at rest in a given arterial tree. This is a prospective, observational study designed to evaluate the role of dynamic computed tomographic perfusion (CTP) and Computed Tomography-Derived Fractional Flow Reserve (CT-FFR) in patients presenting with chest discomfort.Patients with lesions greater than 50% will qualify to be a subject in the CTP study /CT-FFR 49. Those who agree to participate will be scheduled to have the CT-FFR and CTP performed within sixty days of the initial Coronary CTA procedure. A CTA will be performed at rest for FFR. The patient will then take approximately a 30 min break. Regadenoson will then be administered and the dynamic CT procedure will be done for perfusion. If patients are deemed to be appropriate for invasive angiography by the referring physician, coronary lesions between 40% and 80% will get a fractional flow measurement performed if indicated on a clinical basis. Stenosis in vessels less than 1.5 mm will be excluded from the study. The CT-FFR and CTP will be performed in these patients within 60 days of index coronary angiography. The CT scanner to be used for this study is an Aquilion ONE ViSION edition 320-detector row scanner with 0.5-mm nominal width detector elements (Toshiba Medical Systems, Otawara, Japan). The scanner has a minimum rotation time of 275 ms. The CT acquisition software includes a novel dose reduction technology (Adaptive Iterative Dose Reduction 3D (AIDR 3D) Toshiba Medical Systems, Otawara, Japan). Prior to imaging procedures Patients will have two 18-20 gauge intravenous lines placed, one preferably in an anticubital vein for contrast administration. Coronary CTA for FFR All patients receive sublingual nitroglycerine prior to scanning to ensure coronary vasodilatation, while additional oral and/or intravenous beta-blockers will be administered to achieve a pre-scan heart rate of <75 beats per minute (bpm). For CT-FFR, a standard protocol for coronary CTA will be applied, according to the established protocol at Lancaster General Hospital. Prior to the scan, an automated bolus tracking algorithm (SUREStart) will be used to time the image acquisition to occur during the arterial phase at or near peak contrast. Scan parameters will be as follows: single heart beat half-scan volume acquisition mode with detector collimation 320 x 0.5 mm or less as necessary to cover heart (typically 120 mm); tube voltage 100-120 kV; gantry rotation time 270 ms. To adjust for patient size, tube potential (kV) and tube current (mA) are determined with use of automatic exposure control (SUREExposure3D, and SUREkV, Toshiba Medical Systems). These features reduce variances in image quality by adjusting the acquisition parameters for body habitus. Prospective electrocardiogram (ECG) triggering will be used to obtain 70-99% of the R-R interval. Radiation dose relevant indices (CT dose index (CTDI vol), dose length product (DLP), and patient size) will be obtained for each examination. Size Specific Dose Estimates (SSD) and Effective Dose (ED) will be calculated by using conversion factors according to standard methodology. Four phases of the R-R Interval (RR) will be reconstructed covering the range from 70% - 99% (typically 70%, 80%, 90%, and 99%). Reconstruction parameters will be as follows: Medium Calibrated Field of View (CFOV), Filter Convolution (FC) 03 reconstruction kernel, 0.5 mm acquisition thickness with 0.25mm interval, AIDR 3D iterative reconstruction. Adaptive motion correction and FIRST will be used if available. Dynamic CTP procedure The CTP procedure involves infusion of a stress agent and a contrast bolus prior to image acquisition. See Figure 2 for a representation of the CTP procedure, and Table 1 for CTP parameters. No stress agent is FDA-approved specifically for use in CT perfusion. The investigator's choice of stress agent for this study is regadenoson (Lexiscan), a vasodilator widely used in standard-of-care nuclear stress testing. It has been used previously in CT perfusion (12). Regadenoson was chosen for its ease of use and its favorable safety/tolerability profile in patients (37). Its mechanism of action is vasodilation of the coronary vasculature and augmentation of coronary blood flow. Arteries with hemodynamically significant stenosis are not as capable of augmenting flow, resulting in relative under-perfusion in the downstream territory. The invesitgators will use the standard intravenous dose of Lexiscan recommended for use in nuclear stress testing in this population, which is 5 ml (0.4 mg). Lexiscan, which comes in a prefilled 5 ml syringe containing 0.4 mg of regadenoson, is administered as a rapid (approximately 10-15 seconds) injection into a peripheral vein followed immediately by a 5 ml saline flush. Addendum 1 gives detailed study procedures for myocardial CT perfusion, including the use of Lexiscan, and Addendum 2 gives the Lancaster General Hospital Lexiscan Administration Guidelines. A 12 lead ECG will be performed at baseline. After this, rhythm monitor leads for CT will be placed. Patient will be positioned supine on the on the CT gantry with continuous ECG monitoring after the baseline ECG is performed as above. If heart rate is greater than 65 beats/minute and blood pressure is greater than 100/60 mm of mercury metoprolol will be administered as per established Lancaster General Health (LGH) protocol for Coronary CTA. Regadenoson will be injected at 0.4 mg / ml followed by 5 ml saline Flush. One minute after regadenoson administration the scanner will be instructed to acquire the heart rate and adjust the gantry rotation time. If patients is stable and has a steady heart rate, 50 cc of contrast will be administered no later than 1.5 minutes after the administration of regadenoson followed by 30 cc - 50 cc of normal saline. The rate of injection for both contrast and saline is 6m/s. A prospectively gated scan will be performed at 70% - 80% of the R - R cycle for every heart beat for a total of 25 seconds. Myocardial Blood flow will be calculated for 17 segments (Table I) . A 12 lead ECG will be obtained immediately after acquisition of images and each subsequent minute for 5 minutes. In the event of ECG changes, the ECG will be repeated every 60 to 90 seconds until it returns to baseline. For patients who experience stress induced adverse reactions during CTP, aminophylline will be administered IV by a co-investigator physician at a dose of 50-250 mg, using the lowest effective dose. Intravenous Aminophylline is a non-selective phosphodiesterase inhibitor that is FDA approved for the treatment of symptoms and reversible airway obstruction due to asthma and other chronic lung diseases. In addition, it is widely accepted as the primary reversal agent of adenosine, dipyridamole, and regadenoson when patients experience pharmacologic vasodilator stress induced adverse reactions during nuclear cardiac stress testing. The dose used for reactions during stress testing, and which the investigator will use for reactions during CTP, is lower than the FDA approved dose of 5.7 mg/kg dose used in patients with acute symptoms of lung disease. The CTP examination will be graded using the standard 17-segment myocardial model recommended by the American College of Cardiology Foundation / American Heart Association for nuclear myocardial perfusion and stress echocardiography, in comparison to the myocardial appearance from the baseline coronary CTA. Areas of myocardial hypo-enhancement (decreased CT signal) under hyperemic conditions (coronary vasodilation during the regadenoson infusion) indicate possible ischemia. Clinical follow-up If clinically indicated by the initial CCTA and the study CTP, the invasive angiography will be performed at the discretion of the evaluating cardiologist based on a clinical evaluation. Lesions between 40% and 80% will have an FFR. Patients' coronary angiography and FFR will be as per the protocol in Penn Medicine Lancaster General Health. Long Term Follow-up Patients medical charts will be reviewed for long term cardiac related outcomes (MACE events, etc) 1 year after the study procedure. This will not require direct participation from the patient. ;

Related Conditions & MeSH terms

• Cardiology
• Chest Pain
• Constriction, Pathologic
• Radiology
• Stenoses

• NCT number: NCT03800862
• Study type: Observational
• Source: Lancaster General Hospital
• Status: Terminated
• Start date: March 27, 2019
• Completion date: October 27, 2022