Clinical Trial Details
— Status: Completed
Administrative data
NCT number |
NCT05038566 |
Other study ID # |
20212193 |
Secondary ID |
|
Status |
Completed |
Phase |
N/A
|
First received |
|
Last updated |
|
Start date |
July 15, 2021 |
Est. completion date |
April 28, 2022 |
Study information
Verified date |
September 2022 |
Source |
Liberating Technologies, Inc. |
Contact |
n/a |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
Liberating Technologies, Inc. (LTI) has developed a dexterous prosthetic fingertip that will
be fit onto an i-Digits™ partial hand prosthesis and allow for an additional fine grasp. The
device will interface with research participants' existing prostheses and use the same
control strategy that is used for their everyday use. Each participant's prosthesis will be
restored to their original configuration by the end of their testing period.
Description:
Liberating Technologies, Inc. (LTI) has developed a dexterous prosthetic fingertip that will
be fit onto an i-Digits™ partial hand prosthesis and allow for an additional fine grasp. The
device will interface with research participant's existing prostheses and use the same
control strategy that is used for their everyday use. Each participant's prosthesis will be
restored to their original configuration by the end of their testing period.
The study will focus on design feasibility testing and will compare performance of hand
functional outcome tests on an i-Digits™ prosthetic partial hand with and without the
investigational Pointdexter modification. Our primary hypothesis is that subjects using the
investigational device will show better performance on objective functional outcomes measures
than those using a standard i-Digits™ partial hand prosthesis, particularly in the
manipulation of small objects.
The investigators will explore multiple outcomes measures as options, but our primary
endpoint will be performance on the Small Common Objects subtask of the Jebsen-Taylor Hand
Function Test, which assesses a broad range of unimanual hand functions required for ADLs.
The primary quantitative measure of the Jebsen-Taylor task will be completion time of each
subtask. Qualitative evaluation will be conducted by an occupational therapist via
observation, and by the user through a self-assessment questionnaire, such as the Patient
Specific Functional Scale (PSFS). The investigators will be performing repeated measures on
each individual subject to reduce the variance as well as having each subject act as their
own control. New and existing i-Digits™ partial hand prosthesis users will be recruited for
the study and consented with an approved protocol. Research participants will schedule a time
to conduct the testing and be informed of study details.
The investigational device being tested is a novel prosthetic finger with a built-in split
gripper. The device is an index finger which can drop in place of existing digits on an
i-Digits™ partial hand prosthesis. The investigational device is controlled with the same
signals as the conventional digits.
This study will pilot test the dexterous fingertip prosthesis with a small number of subjects
(up to 12). Research participants will be consented and will test the device at home and/or
in-lab. Subjects will be introduced to the partial hand prosthesis configuration and be
instructed on how to operate it to complete their testing session.
The in-lab testing will be conducted in a single site visit at Össur Academy in Dublin, Ohio
or LTI in Holliston, MA. Subjects may be asked to come back for an additional site visit if
data collection is incomplete. For this study, the index finger of each participant's
existing everyday prosthesis will be temporarily disconnected and replaced with the
investigational device. The prosthesis will be restored to its original configuration when
the test session has been completed. At the start of the study session, subjects will prepare
for testing in their first configuration (investigational or comparator). If investigational,
subjects will doff their prosthesis and investigators will replace the usual i-Digits™ index
finger with the investigational device. If comparator, subjects will don their usual
unmodified prosthesis. Subjects will be trained on how to operate the investigational device
and be allowed a minimum of 30 minutes to practice using it until they are comfortable with
proceeding. The subjects will be guided to conduct functional outcome tests that involve
picking up and manipulating everyday objects (beans, coins, pegs, spoon, cloth, etc.), such
as the tasks outlined in the Jebsen-Taylor and Peg Board functional tests. Each sub-task in
the functional test will be scored by occupational therapist standards. After a round of
functional testing is done, subjects will fill out the PSFS survey and subjective
questionnaire. Subjects will then doff the prosthesis and don the next device configuration.
Subjects will repeat the functional tests and surveys with each device configuration. After
the final condition, the subject will have completed the study and their prosthesis will be
restored to its usual configuration. The study session should span 3-5 hours.
A subset of subjects will take home the investigational device for up to 4 weeks to provide
feedback of the device when used in everyday tasks. Investigators will restore the user's
prosthesis at the end of the testing period and surveys will be conducted to capture
feedback. Two site visits may be required: one to initialize the study and configure the
prosthesis, and two to restore the prosthesis at the study end.
Both new and existing i-Digits™ partial hand prosthesis users will be invited to participate
in the study. Research participants will schedule a time to conduct the testing and be
informed of study details. Participants will be given as much time as needed to review and
question the informed consent form before signing.
Two different technologies will be assessed:
- Investigational Device: i-Digits™ partial hand prosthesis with dexterous fingertip
modification
- Comparator Baseline: unmodified i-Digits™ partial hand prosthesis
Persons with partial hand limb absence who are new or current i-Digits™ prosthesis users will
be recruited for this study through the LTI and Össur clinician network. Prosthetists may be
contacted with the need for research subjects and, if interested, will be given flyers to
hand out to their patients. If subjects are interested in participating, they can call the
number on the flyer to speak with investigators. In addition, previous research participants
who have given permission to be contacted for future studies may be contacted directly to
assess interest in participating in this study. Enrollment will be open to people of all
ages, genders, races, and ethnicities. Participants must be new or current users of i-Digits™
partial hand prostheses. The user must have an absent index finger at minimum. Patients who
have 4-5 digit and/or thumb involvement will be preferred.
Based on subject population and availability, a convenience sample of up to 12 subjects will
be recruited for this pilot study.