Clinical Trials Logo

Clinical Trial Details — Status: Recruiting

Administrative data

NCT number NCT05577663
Other study ID # AUTh-79/13-02-2020
Secondary ID
Status Recruiting
Phase N/A
First received
Last updated
Start date October 1, 2022
Est. completion date October 1, 2024

Study information

Verified date April 2024
Source Aristotle University Of Thessaloniki
Contact Danae Apatzidou, Assoc. Professor
Phone +306934770361
Email dapatzidou@dent.auth.gr
Is FDA regulated No
Health authority
Study type Interventional

Clinical Trial Summary

Following tooth extraction, volumetric changes in the soft and hard tissues of the extraction site are expected to occur with considerable resorption of the alveolar bone in both the vertical and the horizontal dimensions. These changes may complicate surgical implant placement and may also compromise the outcome of the prosthetic reconstruction. Various treatment approaches have been introduced aiming to preserve the dimensions of the alveolar ridge at the extraction site and facilitate optimal implant placement. This prospective randomized controlled trial aims to determine the efficacy of alveolar ridge preservation utilizing two different socket seal approaches compared to spontaneous healing to stabilize the blood clot within the postextraction socket. Thirty-six subjects will be randomly allocated into one of the three treatment groups. Group-A: Extraction of the tooth and suturing of the extraction socket with resorbable suture PGA 5/0. Group-B: Extraction of the tooth and placement of a Free Gingival Graft stabilized with resorbable suture PGA 5/0. Group-C: Extraction of the tooth and placement of the Polylactic-Glycolic Acid membrane stabilized with resorbable suture PGA 5/0. After the initial examination for screening, subjects will be assessed at baseline-extraction day- and after 1, 2, and 6 weeks, and 3 months. The changes of the alveolar crest will be determined in height and width, in addition to volumetric changes in the soft tissues, and the width of keratinized tissues. The wound healing process will be visually assessed.


Description:

This prospective randomized controlled trial aims to determine the effectiveness of two different approaches of the "socket seal technique" for the preservation of the soft and hard tissues at the extraction site by utilizing a free gingival graft (FGG) or a PLGA membrane to stabilize the blood clot within the extraction socket compared with spontaneous healing of the tissues. Primary outcome variable of the study will be alveolar bone changes in height buccally and palatally. Secondary outcome variables: Alveolar bone changes in width, Mucosa thickness changes, Wound healing visual assessment, Width of keratinized tissues. Materials and methods Thirty-six subjects will be randomly allocated into one of the three treatment groups based on computer-generated lists using a "block-design". Each patient contributes with one study site. Study groups: Group-A: Extraction of the tooth and suturing of the extraction socket with resorbable suture PGA 5/0. Group-B: Extraction of the tooth, deepithelialization of the gingival colar of the socket, placement of a Free Gingival Graft taken from a standardized location of the palate adjusted to seal the socket opening and then stabilize it by resorbable suture PGA 5/0. Group-C: Extraction of the tooth, retraction of mucoperiosteal flaps by 2 mm at the opening of the socket using a microsurgical elevator followed by adjustment of the Polylactic-Glycolic Acid membrane over the socket opening resting by 1 mm over the alveolar crest of the extraction socket. Tissues are sutured over the barrier by resorbable suture PGA 5/0. Timeline of the study/Clinical procedures: First visit - initial examination - (1 week before the surgery) - Suitability of subjects - Consent form; Randomization of the patient - Radiographic examination (Long-cone paralleling technique using a digital sensor attached to a custom-made silicone bite block for reproducible radiographs) - Intra-oral photography - Impression of the examined area in order to create a reference stent to reproduce in a standard manner the clinical/radiographic measurements. - Full mouth scaling; oral hygiene instructions Second visit - Baseline - T0 - Clinical measurements with the use of the reference stent of: (i) The width of keratinized tissues with the use of a periodontal probe (Hu-Friedy XP-23/QW) (ii) The thickness of mucosa with the use of an ultrasonic device SDM (iii) The buccal osseous plate in relation to the gingival margin with a periodontal probe. - Extraction of the tooth in a standardized way to minimize trauma; Post-surgical instructions will be given to the patient. Treatment of the extraction site accordingly to randomized treatment approach (Group-A, -B, -C). (i) Radiographic examination: (ii) Standardized intraoral x-ray and standardized CBCT (with the use of a reference stent) Third visit - T1 - (1 week after the surgery) - Evidence of healing - Intra-oral photography Fourth visit - T2 - (2 weeks after the surgery) - Evidence of healing - Removal of sutures - Intra-oral photography Fifth visit - T3 - Re-evaluation (6 weeks after the surgery) - Intra-oral photography - Width of keratinized tissues with the use of periodontal probe (Hu-Friedy XP-23/QW) - Thickness of mucosa determined by the ultrasonic device SDM in the aforementioned standardized points with the use of the reference stent. - Radiographic examination (The long-cone paralleling technique will be used at a distance of 10 cm between the X-ray head and the digital sensor which is attached to a custom-made silicone bite block for reproducible radiographs.) Sixth visit - T4 - Final evaluation (3 months after the extraction) - Intra-oral photography - Record of periodontal plaque index (Pl) and bleeding on probing (BoP) at the adjacent teeth with the use of periodontal probe (Hu-Friedy XP-23/QW). - Record of the width of keratinized tissues with the use of periodontal probe (Hu-Friedy XP-23/QW) and the thickness with the use of the ultrasonic device SDM in the aforementioned standardized points with the use of the reference stent. - Radiographic examination with standardized intraoral x-ray and CBCT (with the use of the reference stent)


Recruitment information / eligibility

Status Recruiting
Enrollment 39
Est. completion date October 1, 2024
Est. primary completion date June 1, 2024
Accepts healthy volunteers Accepts Healthy Volunteers
Gender All
Age group 18 Years to 65 Years
Eligibility Inclusion Criteria: - Referrals for a single tooth extraction - Periodontal destruction less than 50% of tooth support - Signed inform consent form Exclusion Criteria: - Systematic diseases, contradicting surgical procedures and compromise wound healing (i.e. uncontrolled diabetes) - Medication that interferes with bone metabolism - Pregnancy or lactation - Multiple extractions - Absence of adjacent teeth - Loss of buccal bone, either due to periodontal disease or because of traumatic extraction

Study Design


Related Conditions & MeSH terms


Intervention

Other:
Routine treatment of the extraction socket
Suturing of the extraction socket with resorbable suture PGA 5/0 in order to protect the blood clot
Procedure:
Socket seal technique by a free gingival graft
Placement of a free gingival graft in the socket opening in order to protect and stabilize the blood clot followed by suturing
Socket seal technique using a synthetic resorbable membrane
Placement of a synthetic barrier in the socket opening in order to protect and stabilize the blood clot followed by suturing

Locations

Country Name City State
Greece Dental School, Aristotle University, Dept of Preventive Dentistry, Periodontology and Implant Biology Thessaloniki

Sponsors (2)

Lead Sponsor Collaborator
Aristotle University Of Thessaloniki University Paul Sabatier of Toulouse

Country where clinical trial is conducted

Greece, 

References & Publications (6)

Annunziata M, Guida L, Nastri L, Piccirillo A, Sommese L, Napoli C. The Role of Autologous Platelet Concentrates in Alveolar Socket Preservation: A Systematic Review. Transfus Med Hemother. 2018 May;45(3):195-203. doi: 10.1159/000488061. Epub 2018 May 3. — View Citation

Araujo MG, Lindhe J. Dimensional ridge alterations following tooth extraction. An experimental study in the dog. J Clin Periodontol. 2005 Feb;32(2):212-8. doi: 10.1111/j.1600-051X.2005.00642.x. — View Citation

Farmer M, Darby I. Ridge dimensional changes following single-tooth extraction in the aesthetic zone. Clin Oral Implants Res. 2014 Feb;25(2):272-7. doi: 10.1111/clr.12108. Epub 2013 Jan 25. — View Citation

Jung RE, Siegenthaler DW, Hammerle CH. Postextraction tissue management: a soft tissue punch technique. Int J Periodontics Restorative Dent. 2004 Dec;24(6):545-53. — View Citation

Maiorana C, Poli PP, Deflorian M, Testori T, Mandelli F, Nagursky H, Vinci R. Alveolar socket preservation with demineralised bovine bone mineral and a collagen matrix. J Periodontal Implant Sci. 2017 Aug;47(4):194-210. doi: 10.5051/jpis.2017.47.4.194. Epub 2017 Aug 11. — View Citation

Prato GP, Cairo F, Tinti C, Cortellini P, Muzzi L, Mancini EA. Prevention of alveolar ridge deformities and reconstruction of lost anatomy: a review of surgical approaches. Int J Periodontics Restorative Dent. 2004 Oct;24(5):434-45. doi: 10.11607/prd.00.0602. — View Citation

Outcome

Type Measure Description Time frame Safety issue
Primary Osseous changes in height of the alveolar ridge The height of the alveolar ridge will be measured at standardized points distal, mesial and buccal/ palatal/ lingual at standardized points with the use of a reference stent by a CBCT. Clinically: immediately after tooth extraction(baseline), 6 weeks and 3 months after the extraction. CBCT: immediately after the extraction and 3 months after the extraction
Primary Osseous changes in width of the alveolar ridge The width of the alveolar ridge will be measured distal, mesial and buccal/ palatal/ lingual at standardized points with the use of a reference stent by a CBCT. Immediately after the extraction(baseline) and 3 months after the extraction
Secondary Mucosa thickness changes The thickness of the keratinized tissues will be determined with the use of an ultrasonic device SDM (Austenal Medizintechnik, Koln, Germany) for recording soft tissue thickness at standardized points with the use of a reference stent. Baseline, 6 weeks and 3 months after the extraction
Secondary Width of keratinized tissues The width of the keratinized tissues will be determined on the buccal aspect by a manual periodontal probe (Hu-Friedy XP-23/QW) in a standardized way by the use of a reference stent at three time-points. All recordings will be transferred to a digital caliber Baseline, 6 weeks and 3 months after the extraction
Secondary Wound healing Visual assessment of healing 1 and 2 weeks after the extraction
See also
  Status Clinical Trial Phase
Completed NCT05409950 - Evaluation of Socket Shield Technique With Immediate Implant Placement in the Esthetic Zone N/A
Completed NCT05548049 - Autogenous Ramus Bone Block Harvesting With Piezosurgery N/A
Recruiting NCT05484492 - Alveolar Ridge Preservation With Putty Allograft vs. Putty Alloplast Graft Phase 4
Completed NCT06412705 - Vit D and Post-extractive Bone Turnover N/A
Completed NCT05311332 - Computer-guided vs. Conventional Cortical Shell Technique for Horizontal Augmentation N/A
Completed NCT06269497 - TiO2-scaffolds for Alveolar Ridge Preservation N/A
Enrolling by invitation NCT04434703 - Alveolar Ridge Preservation Following Tooth Extraction Using Advanced Platelet Rich Fibrin (A-PRF) Versus Platelet Rich Fibrin (PRF) N/A
Recruiting NCT05902689 - Application of Sticky Bone and Bio-Oss Collagen in Alveolar Ridge Preservation N/A
Recruiting NCT05937035 - Histological and Volumetric Evaluation of Customized Allograft Bone Blocks N/A
Completed NCT06426719 - Efficiency of Using Osseodensification Protocol N/A
Recruiting NCT05005858 - Modified Ridge Splitting Technique Using Autogenous Bone Blocks (MRS) N/A
Not yet recruiting NCT04789759 - Biomaterial Clinical Performance in a Socket Preservation Model N/A
Completed NCT04830670 - Bone Formation Maxillary Sinus Width
Completed NCT04433117 - Bone Material Comparison in Maxillary Sinus Augmentation Phase 2
Completed NCT05975138 - Trans-gingival or Subcrestal Short Implants Posterior Maxilla Bone Changes
Not yet recruiting NCT06424223 - Tunnel Access for Horizontal Alveolar Ridge Augmentation N/A
Not yet recruiting NCT04022538 - Evaluation of Vertical Height in Anterior Maxillary Sandwich Osteotomy: Simultaneous Versus Delayed Implant Placement N/A
Completed NCT06317090 - Vertical GBR LPRF Block vs. Autogenous Bone With DBBM N/A
Suspended NCT05492838 - Socket Shield Technique With or Without Flap Elevation N/A
Not yet recruiting NCT06242782 - Vertical Ridge Augmentation Strategies Phase 3