Patient Empowerment Through Predictive Personalised Decision Support — PEPPER  

Type1 Diabetes Mellitus Clinical Trial

Official title: Patient Empowerment Through Predictive Personalised Decision Support

Status Completed

Clinical Trial Summary

Patient Empowerment through Predictive PERsonalised decision support (PEPPER) is an European Union (EU) funded research project to develop a personalised clinical decision support system for Type 1 Diabetes Mellitus (T1DM) self-management. The tool provides insulin bolus dose advice, tailored to the needs of individuals. The system uses Case-Based Reasoning (CBR), an artificial intelligence methodology that adapts to new situations according to past experience. The PEPPER system also incorporates a safety module that promotes safety by providing glucose alarms, low-glucose insulin suspension, carbohydrate recommendations and fault detection.The principal research objectives are to assess the usability, safety, and technical proof of concept and feasibility of the PEPPER in participants with T1DM. Evaluation of safety is a priority and will be assessed throughout the clinical studies. The safety components only of the PEPPER system will initially be evaluated in an out-of-clinic environment (phase 1) and will measure incidence and percentage time spent in hypoglycaemia, evaluate usability and incidence of technical faults. Following the initial safety study, the overall PEPPER system (integrated with the CBR algorithm) will be assessed (phase 2) and the primary outcome will be percentage time spent in hypoglycaemia.

Clinical Trial Description

1. Description of the components of the PEPPER system:

Decision support algorithm The decision support algorithm is based on case-based reasoning (CBR). CBR is an artificial intelligence technique that tries to solve newly encountered problems by applying the solutions learned from solved problems encountered in the past. A combination of parameters makes up the case problem presented to the CBR algorithm. Using this information the algorithm will find a similar case scenario from the pool of previously encountered cases and recommend an improved solution (insulin dose) to achieve the best possible outcome (post-prandial blood glucose). Each new case includes information about the problem (e.g. capillary blood glucose, meal information etc), solution (recommended insulin dose) and outcome (post-prandial blood glucose).

PEPPER offers a dual architecture for both Multiple Daily Injections (MDI) or Continuous Subcutaneous Insulin Infusion (CSII) therapy. In both cases, the user periodically wears a continuous glucose monitor (CGM) and an activity monitor.

Handset CSII version: The handset is a portable touch-screen device, which communicates directly with the insulin pump. Its primary function in PEPPER is to allow the user to precisely manage insulin therapy by accepting or rejecting bolus insulin dose recommendations, calculated by the CBR based decision support algorithm, via a graphical interface. In addition, it measures and automatically records glucose levels (via a built-in Blood Glucose (BG) strip reader) and allows logging of food intake and other parameters.

MDI version: This handset is a commercially available Smartphone with the insulin recommendation application running locally on a standard operating system such as iPhone Operating System (iOS) or Android. It has the same functionality as the CSII version, except that it does not have a built-in capillary blood glucose (CBG) reader but instead imports data wirelessly from external CBG monitors.

Secure web server Revision: The handset wirelessly reports the user's case history to the secure portal, a web site which allows the clinician to add new patients, and review the cases to decide which ones should be kept. A case comprises multiple parameters such as carbohydrate intake, BG reading, meal composition, physical activity and hormone cycle.

Personal Health Record on the secure portal allows patients and clinicians to view and update selected components of the detailed history.

Insulin delivery system MDI: will continue using the same insulin they were on. CSII: will use the Cellnovo insulin pump.

Continuous glucose monitoring system The glucose sensor that will be used throughout the clinical studies is the Dexcom sensor (CE marked, manufactured by Dexcom). This current is proportional to the glucose concentration in interstitial fluid and is calibrated against blood glucose a minimum of 12-hourly. The Dexcom CGM data is automatically transmitted to a secure web-based server and the secure PEPPER web-portal. Participants will be able to see their CGM data at all times and this will be used continuously throughout the studies.

Safety features Low and high glucose alarms will be incorporated to alert the user when hypo- and hyperglycaemia is detected to enable the user to act accordingly to bring the glucose levels back to target range.

Glucose prediction algorithm for hypoglycaemia prediction The hypoglycaemia prediction algorithm will enable the system to automatically activate the low glucose suspension feature in pump participants (suspension of insulin delivery until glucose levels are within the target range) and/or trigger an adaptive carbohydrate adviser, which will recommend a personalised carbohydrate snack.

Insulin safety constraints Personalised maximum insulin dose thresholds will be incorporated to prevent overdosing on insulin.

Fault detection Insulin pumps and CGMs are well-established technologies, but faults in these devices (e.g. pump occlusion, loss of sensor sensitivity) may occur. A fault detection system will identify such faults and alert the user to recommend a corresponding action to revert to the normal state.

Participants will have the opportunity to call a physician for medical support and an engineer for technical support 24 hours a day.

2.2 Recruitment This is a multicentre study and recruiting for the clinical study will be undertaken in the diabetes clinics at the Institut d'Investigació Biomédica de Girona (IdIBGi) (Spain) and the Imperial College London (ICL) (UK) from registered research databases and from interested participants who contact us.

2.3 Clinical studies: 2.3.1 Phase 1

Objective: To demonstrate safety and technical proof of concept of the PEPPER safety system (without the CBR algorithm) in the participant's own environment.

Primary outcome and secondary outcomes are defined in Outcome Measures.

Timescale: Each participant will be in the study for 8 weeks: run-in period (2 weeks period) and intervention period (6 weeks period). It is anticipated that it will take 6 months to complete this phase.

Population: 10 adults with T1DM (5 on MDI and 5 on CSII)

Visit 1: Screening Attend the clinical research unit Signed and dated informed consent Demographics data (date of birth, gender, race and ethnicity) Medical and surgical history and allergies to medication Details of the diabetes history Menstrual history and contraception (females) Medications and supplements Social history including drinking, smoking and drug habits Vital signs ECG Random venous blood and urine sample Urine pregnancy test in female participants of childbearing age Basic diabetes education revision, Insulin treatment adjusted if needed Questionnaires to be completed Participants will be provided with the real-time (RT) CGM (Dexcom) The participant will be instructed how to make correct CGM calibration. Quality control testing will be performed on the study devices as recommended in the manufacturer guidelines Participants will be shown how to insert the sensor themselves, interpret the CGM data in real time and to set the hypo- and hyperglycaemia threshold alarms. The alarm threshold will be set at 4mmol/l and 11mmol/l and participants will be encouraged to keep it at those levels and not to reduce the hypoglycaemia threshold below 3.3mmol/L) Participants to complete a 2-weeks run-in period using RT-CGM (Dexcom) and a standard bolus calculator to familiarize themselves with RT-CGM Participants on MDI will be provided with the study CBG meter Participants on CSII will be provided with the Cellnovo study

Visit 2: CGM review and study start Attend 2 weeks after visit 1 CGM data review Insulin treatment adjusted if needed A standardised physical activity monitor will be provided and participants will be shown how to use it.

Switch on the PEPPER handset (CBR algorithm disabled) Detailed user guides (Cellnovo, Dexcom CGM, PEPPER handset) will be given to the participants and an instruction sheet with 24-hour contact information of the research team to address any problems or questions.

Visit 3: 2-week visit Attend 2 weeks after visit 2 at clinical research unit CGM data review Insulin treatment adjusted if needed Review any technical issues.

Visit 4: Final visit (6 weeks after visit 2) CGM data review Switch off PEPPER system and return device Participants to revert to their usual treatment Questionnaires to be completed.

2.3.2 Phase 2: Clinical evaluation of safety, feasibility and usability of the PEPPER system.

Objective: To demonstrate safety and technical proof of concept of the overall PEPPER system (integrated with the CBR algorithm).

Primary outcome and secondary outcomes are defined in Outcome Measures.

Timescale and population are the same as in phase 1.

Visit 1: Screening Same as for phase 1

Visit 2: CGM review and study start Switch on the PEPPER handset (CBR algorithm and PEPPER safety system enabled) The rest of steps the same as in phase 1 visit 2

Visit 3: 2-week visit Same as in phase 1 visit 3

Visit 4: 6-week visit (6 weeks after visit 2) Same as in phase 1 visit 4

Visit 5: Final visit Step 5 of usability study

2.3.3 Usability study

Usability of the system will be evaluated throughout the clinical trial phases and redevelopment of the system will be done accordingly.

Objectives: to evaluate usability of the PEPPER handsets over a sustained time period.

Step 1: Training observation Participants will be trained in use of devices. The handset will be filmed during the training to see which aspect is being described.

Step 2: Contextual interview The aim is to gather data at an early stage of the usability engineering process. They will be used to understand the intended use of all parts of the system and the characteristics that relate to safety, within an everyday context. The interview will be semi-structured with choice of questions.

Step 3: Diary study Data will be collected via the Smartphone in a variety of formats. The study follows on from the contextual interview and concludes with an exit interview. Participants will also be phoned at weekly intervals to see how they are finding the bolus advice and to check that there are no problems.

Data collection. Participants will be asked to make diary entries each time they use the PEPPER bolus advisor. Data will be collected using a Smartphone app. It may take a variety of formats including photos, voice memos, text. In addition, written notes will be made after each weekly phone call.

Step 4: Diary exit interview The purpose is to drill down into some of the diary entries to discover supplementary information. Participants will be asked to review each of the diary entries, giving further explanation.This will be followed by an unstructured interview.

The diary will be filmed during the conversation to see which entry is being described.

Step 5: Contextual group All of the members of the feasibility study will be invited to a social meeting in an informal location. The purpose of the session will be to validate the findings from the previous steps.The researcher will endeavour to be an unobtrusive bystander in the discussion, and not offer personal opinions but listen for common issues and themes.

Data collection. Data will be gathered on a notepad or laptop in a visible way.

Data will be gathered using an audio recorder in steps 1-4.

2.4 Statistics The sample size is comparable to other technology pilot safety studies, is a realistic number for recruitment and provides robust safety data. The study is not powered to show a change in the primary or secondary outcomes compared with usual care but is an assessment of a new technology.

2.5 Confidentiality of data collected during interviews To ensure security, data obtained during the course of the interviews will be encrypted and stored securely, with access limited solely to the researchers. Data will be de-identified such that only the researchers will be able to link the data to the participant involved using reversible codes. This is done purely for the purpose of comparison and evaluation across the separate interviews. Any resulting publications using the data will not identify the participants, and any quotes will kept anonymous should participants consent to this.

2.6 Electronic data storage on secure web-server Data security and privacy will be a priority whilst dealing with medical data such as that held in the PEPPER system. During the clinical studies (phases 1-2) anonymous clinical data will be entered and stored on a secure web-server. Anonymous data collected by the PEPPER handset (such as glucose, meal information, physical activity, alcohol, exercise) and the Dexcom CGM system will be automatically transmitted to the secure web-server. For this purpose, EU regulatory procedures (Directives 95/46/EC and 2002/58/EC) will be observed. Medical data will be stored and protected against non-authorised access; transmission of data will be secured; only authorised users will have access to services and stored data. Authentication will be required for application use and data synchronisation. PEPPER will operate according to standard interoperability guidelines (e.g. HL7), so that information can be exchanged seamlessly between the various components. Authorised users will include study team members from the PEPPER collaborators. Collaborators will only be able to view anonymous PEPPER handset data.

The data generated by the study will be analysed by the collaborative PEPPER research team at their respective sites. The analysis will be on anonymised data which will be aggregated during joint meetings on either clinical site.

Missing, unused, and spurious data will be assessed on an individual basis and may be ignored, withdrawn or the visit may be removed from the analysis with appropriate justification adjudicated by the Principal Investigator.

2.7 Adverse Events (AEs) Reporting Procedures All adverse events will be reported. Depending on the nature of the event the reporting procedures below will be followed. Any questions concerning adverse event reporting will be directed to the Chief Investigator in the first instance.

Non serious AEs: All such events will be recorded.

Serious Adverse Events (SAEs): An SAE form will be completed and faxed to the Chief Investigator within 24 hours. However, hospitalisations for elective treatment of a pre-existing condition do not need reporting as SAEs.

Reports of related and unexpected SAEs will be submitted within 15 days of the Chief Investigator becoming aware of the event. The Chief Investigator will also notify the Sponsor of all SAEs, where in the opinion of the Chief Investigator, the event is:

'related', i.e resulted from the administration of any of the research procedures; and 'unexpected', i.e an event that is not listed in the protocol as an expected occurrence Local investigators will report any SAEs as required by their Local Research Ethics Committee, Sponsor and/or Research & Development Office. ;

Related Conditions & MeSH terms

• Diabetes Mellitus
• Diabetes Mellitus, Type 1
• Type1 Diabetes Mellitus

• NCT number: NCT03738982
• Study type: Interventional
• Source: Imperial College London
• Status: Completed
• Phase: N/A
• Start date: January 9, 2018
• Completion date: November 14, 2019