Alignment Efficiency and Coating Durability of Aesthetic Archwires

Tooth Movement Clinical Trial

— RCT  

Official title:

Randomised Controlled Trial of the Alignment Efficiency and Coating Durability of Aesthetic Archwires

Clinical Trial Details — Status: Completed

Administrative data

• NCT number: NCT03876184
• Other study ID #: USM/JEPeM/17010022
• Status: Completed
• Phase: N/A
• Start date: October 2, 2017
• Est. completion date: January 31, 2020

Study information

• Verified date: May 2021
• Source: Universiti Sains Malaysia
• Contact: n/a
• Is FDA regulated: No
• Study type: Interventional

Clinical Trial Summary

This study investigates the efficiency of orthodontic aesthetic archwires which are coated with tooth-colored materials and the durability of the coatings after being used. Theoretically, the coatings provide excellent aesthetics throughout treatment and faster tooth alignment. However, from our clinical experience, these claims are the opposite. Cracks and ruptures as well as archwire fractures have been noted. Therefore, it is presumed that the aesthetic archwires may not be any different from the conventional uncoated archwires.

Description:

The development of superelastics nickel titanium (SE NiTi) has overcome problems with previous aligning archwires. This archwire is deemed to be the gold standard aligning archwire for Straight Wire® system due to its shape memory effect, high elasticity and low permanent deformation which delivers continuous force for orthodontic tooth alignment. The only drawbacks of this wire type are it is expensive, have high frictional resistance (Kapila et al., 1990) and is associated with hypersensitivity reaction in nickel allergic patients (Bass et al., 1993). Development of teflon or polytetrafluoroethylene (PTFE) which is anti-adherent and possesses aesthetic property had been used as orthodontic bracket, archwire and ligature coating. This polymer consists of synthetic fluorine-containing resin or epoxy resin composed mainly of polytetrafluoroethylyene to simulate tooth colour. The polymeric chain with good mechanical stability had been shown to reduce the frictional resistance between bracket-archwire interface and when used as archwire ligature (Farronato et al., 2012, De Franco et al., 1995). PTFE-coated brackets were reported to minimise the formation of biofilm during treatment which can reduce the risk of enamel decalcification (Demling et al., 2010). Furthermore, the coated aesthetic archwires have potential to obviate any allergic reaction during orthodontic treatment in patients with known hypersensitivity to nickel alloy. Manufacturers have claimed that the aesthetic archwires available in the market have good color stability (remains unchanged for 6 to 8-week duration), good coating durability and low friction, allowing faster tooth movement. However, to our experience, these claims are the opposite. As these aesthetic archwires are much more expensive than the conventional superelastic nickel titanium, it is therefore important to establish a clinical data to allow clinicians and patients to make a justifiable choice on treatment and develop further research in this area.

Recruitment information / eligibility

• Status: Completed
• Enrollment: 132
• Est. completion date: January 31, 2020
• Est. primary completion date: January 31, 2020
• Accepts healthy volunteers: Accepts Healthy Volunteers
• Gender: All
• Age group: 11 Years and older

Eligibility

Inclusion Criteria:

• Patient aged 11 years old and above in permanent dentition with all teeth from upper and lower 6 - 6 are present, tooth apices are closed
• Patients who require complete bond-up with upper and lower pre-adjusted edgewise bracket system, MBT prescription with bracket slot size 0.022"
• Able to give consent* *Assent form is required for children below 18 years of age

Exclusion Criteria:

• Patients with cleft lip and palate and other craniofacial deformities and syndromes
• Patients with medical problems / medications that can influence rate of tooth movement
• Teeth blocked out of the arch / ectopic teeth not allowing bracket placement and ligation at bond-up
• Hypodontia with more than one tooth missing in any quadrant
• Have had orthodontic treatment before

Related Conditions & MeSH terms

• Tooth Movement

Intervention

Other:
• Aesthetic archwires
During bond-up, randomly allocated envelope will be opened and archwires will be ligated with elastomeric ligatures.After 4 weeks,the same archwires will be retied.Any fractured archwire will be recorded and discarded.The fractured wire will be replaced with conventional archwire and treatment continues.On the 2nd follow-up (at 8th week), the tested wires are collected, disinfected, dried and placed back in the allocated envelope.Upper and lower impressions will be taken.Questionnaires will be answered by participants.The trial ends and treatment continues as planned.Fractured archwire will be recorded and discarded.
• Control group
During bond-up, randomly allocated envelope will be opened and archwires will be ligated with elastomeric ligatures.After 4 weeks,the same archwires will be retied.Any fractured archwire will be recorded and discarded.The fractured wire will be replaced with conventional archwire and treatment continues.On the 2nd follow-up (at 8th week), the tested wires are collected, disinfected, dried and placed back in the allocated envelope.Upper and lower impressions will be taken.This group will not answer the questionnaire.The trial ends and treatment continues as planned.Fractured archwire will be recorded and discarded.

Locations

Country	Name	City	State
Malaysia	Advanced Medical & Dental Institute	Kepala Batas	Penang
Malaysia	School of Dental Sciences	Kubang Kerian	Kelantan
Malaysia	Desa Murni Dental Clinic	Permatang Pauh	Penang

Sponsors (1)

Lead Sponsor	Collaborator
Universiti Sains Malaysia

Country where clinical trial is conducted

Malaysia, 

References & Publications (5)

Bass JK, Fine H, Cisneros GJ. Nickel hypersensitivity in the orthodontic patient. Am J Orthod Dentofacial Orthop. 1993 Mar;103(3):280-5. — View Citation

De Franco DJ, Spiller RE Jr, von Fraunhofer JA. Frictional resistances using Teflon-coated ligatures with various bracket-archwire combinations. Angle Orthod. 1995;65(1):63-72; discussion 73-4. — View Citation

Demling A, Elter C, Heidenblut T, Bach FW, Hahn A, Schwestka-Polly R, Stiesch M, Heuer W. Reduction of biofilm on orthodontic brackets with the use of a polytetrafluoroethylene coating. Eur J Orthod. 2010 Aug;32(4):414-8. doi: 10.1093/ejo/cjp142. Epub 2010 Feb 5. — View Citation

Farronato G, Maijer R, Carìa MP, Esposito L, Alberzoni D, Cacciatore G. The effect of Teflon coating on the resistance to sliding of orthodontic archwires. Eur J Orthod. 2012 Aug;34(4):410-7. doi: 10.1093/ejo/cjr011. Epub 2011 Apr 8. — View Citation

Kapila S, Angolkar PV, Duncanson MG Jr, Nanda RS. Evaluation of friction between edgewise stainless steel brackets and orthodontic wires of four alloys. Am J Orthod Dentofacial Orthop. 1990 Aug;98(2):117-26. — View Citation

Outcome

Type	Measure	Description	Time frame	Safety issue
Primary	Alignment efficiency	The tooth irregularity between pre- and post-experiment dental casts are measured in millimetres. The difference between the two measurement will be calculated in percentage.	8 weeks
Secondary	Coating loss	The amount of coating loss between the used and unused archwires will be measured in percentage.	8 weeks
Secondary	Color change	The difference in colour (colour change) between used and unused archwires will be measured in CIE L* a* b* colour space units.	8 weeks
Secondary	Participant perception towards aesthetic archwires	Patient perception will be assessed using oral aesthetic subjective impact scale (OASIS) questionnaires after the use of aesthetic archwires (at week 8). The cumulative score will be used to determine the perception (14 and below = positive perception; 15 and above = negative perception).	8 weeks