Clinical Trial Details
— Status: Completed
Administrative data
NCT number |
NCT05127993 |
Other study ID # |
BUN143201526629 |
Secondary ID |
|
Status |
Completed |
Phase |
N/A
|
First received |
|
Last updated |
|
Start date |
January 21, 2021 |
Est. completion date |
March 17, 2022 |
Study information
Verified date |
April 2022 |
Source |
Vrije Universiteit Brussel |
Contact |
n/a |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
The passive Talaris Demonstrator (TD) is developed in continuation of previous prototypes.
The main goal of the experiment is to evaluate the effectiveness of TD during daily
activities.
Description:
Twenty-eight healthy active participants with an unilateral transtibial amputation will
conduct 2 experimental trials (EXP1 & EXP2) on the same day in a randomized order, i.e. EXP1
with the currently used prosthesis and EXP2 with the passive Talaris Demonstrator. Each
experimental trial will include 6 minutes of treadmill walking at 3 different speeds in
consecutive blocks of 2 minutes, a slope walking test, a stair climbing test, a L-test and an
outdoor walking task.
The six minutes walk test (6MWT) has become one of the most widely used performance-based
outcome measures of functional mobility and exercise capacity. Recently, the 6MWT has been
found to correlate with single-limb balance time and symmetry of step length in people with
amputation. Additionally, the 6MWT distance has been shown to be responsive to functional
training interventions in people with lower-limb amputation. Six minutes of treadmill walking
at 3 different speeds will be performed. This test will be performed in consecutive blocks of
2 minutes. These consecutive blocks will be walking 2 minutes at self-selected (SS) speed, 2
minutes at 75% of the SS speed and 2 minutes at 125% of the SS speed. These different walking
speeds elicit different angular positions of the ankle and activation levels of muscles, and
thus might alter the effectiveness of the novel device.
The slope walking test assesses the participants' ability to ascend and descend a 6 m long
ramp of 10% inclination as fast as possible. For safety reasons bilateral handrails are
warranted. Participants start the test in an upright position in front of the ramp and are
asked to ascend the ramp, turn around on the platform, descend the ramp and return to the
starting position.
The stair climbing test assesses the participants' ability to ascend and descend a staircase
(84 cm total height, 3-step staircase with an average rise of 28 cm and run of 18 cm).
Participants start in front of the staircase and are asked to ascend and descend as fast as
possible. Again, bilateral handrails are required to allow support when needed. The ascending
phase is initiated with the prosthetic side, while the first step of the descending phase is
performed with the non-involved leg.
The L-test, requires higher physical activity of the user. During the L-test, participants
are asked to rise from a chair, walk 7 meters, turn 90 degrees, walk 3 meters, turn 180
degrees and then return in the same way to the seated position. A total distance of 20 meter
is covered.