NeuWave HCC China Study — NW  

Hepatocellular Carcinoma Clinical Trial

Official title: A Single-Arm, Prospective, Multicenter Study to Evaluate the Safety and Effectiveness of the NeuWave Certus Microwave Ablation System in Chinese Patients With Hepatocellular Carcinoma

Status Completed

Clinical Trial Summary

This is a single-arm, prospective, multicenter, study. Individuals who are assessed for microwave (MW) ablation of HCC in accordance with their institution's standard of care (SOC), who meet study entry criteria and sign the informed consent, will be enrolled. The patients will be treated with MW ablation and afterwards followed for up to 36 months after the original ablation procedure to assess efficacy and safety. In addition to the final analysis after all enrolled patients complete the 36-month observation period, a summary of selected endpoints will be provided after all enrolled patients have completed each of the 1-month and 12-month visits.

To provide sites with an opportunity to get equal experience in the use of the Certus system, there will 3 patients treated as part of a run-in phase. These patients will only be included in the safety set.

Clinical Trial Description

Patients who have a single HCC tumor up to 5 cm or a maximum of 3 HCC tumors of up to 3 cm per tumor will receive the same procedure: microwave ablation using only the NeuWave Certus Microwave Ablation System. Patients in this study will come to their study site for the ablation procedure. After the ablation procedure, the patient will be observed, which in most cases is expected to be 2 to 3 hours, and afterwards may return home. If the Study Doctor decides it is warranted for patient safety, the patient will remain in the hospital longer.

A minimum of one MRI of the liver must be taken at Baseline/Screening to ascertain tumor type, location, and size. (Tumor size will be measured in longest diameter and the diameter that is perpendicular to this longest diameter; tumor size must be measured with at least 2D imaging.) Physicians who are experienced with tumor ablation will do all ablations percutaneously using only the NeuWave Certus Ablation System. During the ablation, patients will be under an anesthesia method as per the institution's SOC. Ultrasound and/or CT scan will be used to guide the probe to the tumor and confirm accurate placement of the probe prior to emitting the microwaves.

Within 7 days after ablation, contrast-enhanced MRI will be done to confirm the completion of the ablation procedure. According to the standard practice at each study site, ablation confirmation will be classified as:

• complete tumor ablation with adequate margin (A0).

• complete tumor ablation with insufficient margin (A1).

• incomplete tumor ablation (A2). Over the course of 3 years, patients will return to their study site for post ablation follow-up visits, which will be carried out per the Schedule of Activities (see Table 1 at the end of the Synopsis). The follow-up schedule will be based on the original ablation procedure date. A re-ablation for any reason will not re-start or change the follow-up visit schedule.

At every follow-up visit, every patient will be scanned with at least one MRI to see if there are any tumor foci at the edge of the ablation zone, which indicates tumor progression. Repeat microwave ablation (using the Certus Microwave Ablation System only) may be performed for recurrence of target tumor(s) or to achieve complete tumor ablation with adequate margin (A0) of the target tumor(s) if the initial ablation had an insufficient margin, if the treating physician deems appropriate and necessary.

While repeat ablations for a recurrence may be conducted at any point during the study duration, repeat ablations to correct an ablative margin may only be performed within the first 30 days of the original ablation (by Visit 3). ;

Related Conditions & MeSH terms

• Carcinoma
• Carcinoma, Hepatocellular
• Hepatocellular Carcinoma
• Liver Tumor

• NCT number: NCT03783871
• Study type: Interventional
• Source: Ethicon, Inc.
• Status: Completed
• Phase: N/A
• Start date: February 17, 2019
• Completion date: January 17, 2024