Outcome
Type |
Measure |
Description |
Time frame |
Safety issue |
Primary |
Calculated Exposure Measures for Area Under the Curve 0 to 24 Hours After a Dose (AUC0-24) |
Total AUC0-24 is defined as area under the plasma minocycline concentration-time curve from 0 to 24 hours after a dose (milligrams x hours per liter (mg•hr/L)). Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. The AUC0-24 was calculated using numerical integration using the data from 0 to 24 hours post-dose. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, and 24 hours post dose |
|
Primary |
Calculated Exposure Measures for Area Under the Curve From 0 to Infinity (AUC0-inf) Using Free-drug Concentrations |
Free-drug (unbound) AUC0-inf is defined as area under the plasma minocycline concentration-time curve from 0 to infinity after a dose (mg•hr/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate unbound concentration-time profiles. The AUC0-inf was calculated as Dose/CL. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Calculated Exposure Measures for Area Under the Curve From 0 to Infinity (AUC0-inf) Using Total-drug Concentrations |
Total AUC0-inf is defined as area under the plasma minocycline concentration-time curve from 0 to infinity after a dose (mg•hr/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. The AUC0-inf was calculated as Dose/CL. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Calculated Exposure Measures for Area Under the Curve to the Last Quantifiable Sample (AUC0-last) |
AUC0-last is defined as the area under the plasma minocycline concentration-time curve from 0 to the time of the last quantifiable sample after a dose (mg•hr/L). This was not calculated for the primary outcome measure using the individual post-hoc PK parameters, however was calculated as part of the Non-compartmental analysis using the linear trapezoidal rule (linear up, log down calculation method). |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Calculated Exposure Measures for Maximum Plasma Concentration (Cmax) |
Total-drug Cmax is defined as the maximum plasma total minocycline concentration (mg/L) Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. Total Cmax was calculated for each simulated patient as the maximum simulated concentration. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Calculated Exposure Measures for Plasma Concentration at 24 Hours After Dose (C24) |
Total-drug C24 is defined as total plasma minocycline concentration at 24 hours after a dose (mg/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. The total C24 were calculated for each simulated patient as the simulated concentration at 24 hours after dose. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, and 24 hours post dose |
|
Primary |
Individual Post-hoc PK Parameter Estimates for Area Under the Curve 0 to 24 Hours After a Dose (AUC0-24) |
Total AUC0-24 is defined as area under the plasma minocycline concentration-time curve from 0 to 24 hours after a dose (mg•hr/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. The AUC0-24 was calculated for each individual using numerical integration using the data from 0 to 24 hours post-dose. Summary statistics were calculated using the individual post-hoc parameters and reported as calculated exposure measures. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, and 24 hours post dose |
|
Primary |
Individual Post-hoc PK Parameter Estimates for Area Under the Curve From 0 to Infinity (AUC0-inf) Using Free-drug Concentrations |
Free-drug (unbound) AUC0-inf is defined as area under the plasma minocycline concentration-time curve from 0 to infinity after a dose (mg•hr/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate unbound concentration-time profiles. The AUC0-inf was calculated for each individual as Dose/CL. Summary statistics were calculated using the individual post-hoc parameters and reported as calculated exposure measures. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Individual Post-hoc PK Parameter Estimates for Area Under the Curve From 0 to Infinity (AUC0-inf) Using Total-drug Concentrations |
Total AUC0-inf is defined as area under the plasma minocycline concentration-time curve from 0 to infinity after a dose (mg•hr/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. The AUC0-inf was calculated for each individual as Dose/CL. Summary statistics were calculated using the individual post-hoc parameters and reported as calculated exposure measures. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Individual Post-hoc PK Parameter Estimates for Area Under the Curve to the Last Quantifiable Sample (AUC0-last) |
AUC0-last is defined as the area under the plasma minocycline concentration-time curve from 0 to the time of the last quantifiable sample after a dose (mg•hr/L). This was not calculated of the primary outcome measure for the population PK model, however was calculated as part of the Non-compartmental analysis using the linear trapezoidal rule (linear up, log down calculation method). |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Individual Post-hoc PK Parameter Estimates for Maximum Plasma Concentration (Cmax) |
Total-drug Cmax is defined as the maximum plasma total minocycline concentration (mg/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. The Individual post-hoc PK parameter estimate for total Cmax was calculated for each simulated patient as the maximum simulated concentration. Summary statistics were calculated using the individual post-hoc parameters and reported as calculated exposure measures. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Individual Post-hoc PK Parameter Estimates for Plasma Concentration at 24 Hours After Dose (C24) |
Total-drug C24 is defined as total Plasma minocycline concentration at 24 hours after a dose (mg/L). Patient dosing histories along with the individual post-hoc PK parameters were used to generate total concentration-time profiles. The Individual post-hoc PK parameter estimates for the total C24 were calculated for each simulated patient as the simulated concentration at 24 hours after dose. Summary statistics were calculated using the individual post-hoc parameters and reported as calculated exposure measures. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, and 24 hours post dose |
|
Primary |
Magnitude of the Inter-individual Variability for Central Volume of Distribution (Vc) |
Vc was estimated from the structural two-compartment population PK model with constant fraction unbound (fub) which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. Magnitude of the inter-individual variability is expressed as percent coefficient of variation (%CV). |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Magnitude of the Inter-individual Variability for Distribution Clearance (CLd) |
CLd was estimated from the structural two-compartment population PK model with constant fraction unbound (fub) which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. The standard error of the mean as fixed. Magnitude of the inter-individual variability is expressed as percent coefficient of variation (CV%). |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Magnitude of the Inter-individual Variability for Free-drug Clearance (CL) |
Unbound minocycline concentration is determined as the product of total minocycline concentrations and fub. Total minocycline concentrations and fub were estimated from the structural two-compartment population PK model with constant fraction unbound (fub) which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. Magnitude of the inter-individual variability is expressed as percent coefficient of variation (%CV). |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Magnitude of the Inter-individual Variability for Peripheral Volume of Distribution (Vp) |
Vp was estimated from the structural two-compartment population PK model with constant fraction unbound (fub), which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Magnitude of the Inter-individual Variability for Total-drug Clearance (CL) |
CL was estimated from the structural two-compartment population PK model with constant fraction unbound (fub) which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. Magnitude of the inter-individual variability is expressed as percent coefficient of variation (%CV). |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Population Mean PK Parameter Estimates for Central Volume of Distribution (Vc) |
Vc was estimated from the structural two-compartment population PK model with constant fraction unbound (fub) which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Population Mean PK Parameter Estimates for Distribution Clearance (CLd) |
CLd was estimated from the structural two-compartment population PK model with constant fraction unbound (fub), which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Population Mean PK Parameter Estimates for Free-drug Clearance (CL) |
Unbound minocycline concentration is determined as the product of total minocycline concentrations and fub. Total minocycline concentrations and fub were estimated from the structural two-compartment population PK model with constant fraction unbound (fub) which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Population Mean PK Parameter Estimates for Peripheral Volume of Distribution (Vp) |
Vp was estimated from the structural two-compartment population PK model with constant fraction unbound (fub), which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|
Primary |
Population Mean PK Parameter Estimates for Total-drug Clearance (CL) |
Total-drug clearance (CL) was estimated from the structural two-compartment population PK model with constant fraction unbound (fub), which was used to characterize the total and unbound minocycline concentration-time data from ICU patients. The model was developed on using nonlinear mixed effects modeling on PK time points collected up to 48 hours after a single-dose on Day 1. |
Pre-dose, immediately after infusion termination (~1 hour) and at 4, 12, 24, 36, and 48 post dose |
|