In Situ Erosion Study to Investigate the Effectiveness of an Experimental Toothpaste

Tooth Erosion Clinical Trial

Official title:

A Randomized, Examiner Blind, Crossover, in Situ Erosion Study to Investigate the Efficacy of an Experimental Dentifrice in Remineralization of Previously Softened Enamel Compared to a Placebo Dentifrice

Clinical Trial Details — Status: Completed

Administrative data

• NCT number: NCT03296072
• Other study ID #: 208166
• Status: Completed
• Phase: Phase 3
• Start date: November 13, 2017
• Est. completion date: January 16, 2018

Study information

• Verified date: August 2020
• Source: GlaxoSmithKline
• Contact: n/a
• Is FDA regulated: No
• Study type: Interventional

Clinical Trial Summary

This will be a randomized, controlled, single center, single- blind, 3 period, 3 treatment, cross-over, in situ design which consists of placing pre-eroded bovine enamel specimens intra orally using a palatal appliance and testing the remineralizing performance of the experimental (dentifrice containing 0.254 Percent weight by weight [%, w/w] sodium fluoride (1150 parts per million [ppm] fluoride) and 5% KNO3 [potassium nitrate]), comparator (dentifrice containing 0.454% w/w stannous fluoride (1100 ppm fluoride) and placebo (Fluoride free placebo containing 5% KNO3 [0 ppm fluoride] ) dentifrices 2 and 4 hours (hrs) post treatment application, based on surface micro hardness measurements. This study will be carried out in healthy adults with a maxillary dental arch suitable for the retention of the palatal appliance.

Description:

The aim of this study is to investigate the performance of an experimental dentifrice formulation in promoting enamel remineralization and inhibiting post-treatment enamel demineralization in an in situ erosion model, in comparison with a fluoride-free placebo and with a marketed competitor dentifrice product. The study will have 4 visits, 1 screening visit to assess participants eligibility and 3 treatment visits to assess product efficacy, where the treatment product will be dispensed and used under the supervision of a suitably trained study site personnel. Prior to each treatment visit, there will be a washout period of a minimum of 3 days. During this period participants will use their own dentifrice for at least one day, and a fluoride free dentifrice (provided) for two days prior to the next scheduled visit (including in the morning of the scheduled visit) to minimize any carry-over effects of the fluoride toothpaste.

Recruitment information / eligibility

• Status: Completed
• Enrollment: 62
• Est. completion date: January 16, 2018
• Est. primary completion date: January 16, 2018
• Accepts healthy volunteers: Accepts Healthy Volunteers
• Gender: All
• Age group: 18 Years to 65 Years

Eligibility

Inclusion Criteria:

• Evidence of a personally signed and dated informed consent.

• Male and female participants who, at the time of screening, are between the ages of 18 and 65 years, inclusive.

• Participant who is willing and able to comply with scheduled visits, treatment plan, and other study procedures.

• Good general and mental health with, in the opinion of the investigator or medically qualified designee. No clinically significant and relevant abnormalities in medical history or oral examination.

• Male participant able to father children and female participant of childbearing potential and at risk for pregnancy must agree to use a highly effective method of contraception throughout the study and for 5 days after the last dose of assigned treatment.

• Good oral health without lesions of the oral cavity that could interfere with the study evaluations.

• Maxillary dental arch suitable for the retention of the palatal appliance

• Unstimulated salivary flow rate of at least 0.2 mL/minute and a stimulated salivary flow rate of at least 0.8 mL/minute.

• Understands and is willing, able and likely to comply with all study procedures and restrictions.

Exclusion Criteria:

• Participants who are investigational site staff members directly involved in the conduct of the study and their family members, site staff members otherwise supervised by the investigator, or participants who are GSK employees directly involved in the conduct of the study.

• Participation in other studies involving investigational drug(s) within 30 days prior to screening visit.

• Participation in other studies involving investigational oral care or cosmetic products within 30 days prior to screening visit.

• Acute or chronic medical or psychiatric condition that may increase the risk associated with study participation or investigational product administration or may interfere with the interpretation of study results and, in the judgment of the investigator, would make the participant inappropriate for entry into this study.

• Pregnant female participant (self - reported).

• Breastfeeding female participant.

• Known or suspected intolerance or hypersensitivity to the study materials (or closely related compounds) or any of their stated ingredients. Unwilling or unable to comply with the lifestyle guidelines described in this protocol.

• Medication that may interfere significantly with the saliva flow in the judgment of the investigator. Should new medications that may interfere with the saliva flow be added, a second salivary flow test will be performed.

• Participant with any condition that would impact on their safety or wellbeing or affect their ability to understand and follow study procedures and requirements.

• Any sign of grossly carious lesions (active), moderate or severe periodontal conditions, or severe tooth wear. Participant presenting at screening with minor caries may continue in the study if their carious lesions are repaired prior to the first treatment visit of the study.

• Wears oral appliance or orthodontia (besides participants wearing permanent lower retainers, which are eligible).

• Recent history (within the last year) of alcohol or other substance abuse. Participant who has previously been enrolled in this study.

Related Conditions & MeSH terms

• Tooth Erosion

Intervention

Drug:
• 0.254% w/w sodium fluoride and 5% KNO3
Dentifrice containing 0.254% w/w sodium fluoride (1150 ppm fluoride) and 5% KNO3; plus 0.25% PVM/MA copolymer and 2.5% sodium lactate. Participants will brush it on the buccal surfaces of their natural teeth for 25 timed seconds and then swish the resulting toothpaste slurry around the mouth, without further brushing, for a timed period of 95 seconds. After expectorating the slurry, the participants will gently rinse their mouths with 15 millilitres [mL] of tap water for 10 seconds before expectorating again.
• 0.454% w/w stannous fluoride
Dentifrice containing 0.454% w/w stannous fluoride (1100 ppm fluoride). Participants will brush it on the buccal surfaces of their natural teeth for 25 timed seconds and then swish the resulting toothpaste slurry around the mouth, without further brushing, for a timed period of 95 seconds. After expectorating the slurry, the participants will gently rinse their mouths with 15 mL of tap water for 10 seconds before expectorating again.
• 5% KNO3
Fluoride free placebo dentifrice containing 5% KNO3 (0 ppm fluoride), 0.25% PVM/MA copolymer and 2.5% lactate. Participants will brush it on the buccal surfaces of their natural teeth for 25 timed seconds and then swish the resulting toothpaste slurry around the mouth, without further brushing, for a timed period of 95 seconds. After expectorating the slurry, the participants will gently rinse their mouths with 15 mL of tap water for 10 seconds before expectorating again.

Locations

Country	Name	City	State
United States	GSK Investigational Site	Indianapolis	Indiana

Sponsors (1)

Lead Sponsor	Collaborator
GlaxoSmithKline

Country where clinical trial is conducted

United States, 

Outcome

Type	Measure	Description	Time frame	Safety issue
Primary	% Surface Micro Hardness Recovery (SMHR; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Enhance Remineralization of Enamel)	The %SMHR was calculated to assess the changes in mineralization status of enamel specimens. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after 2 and 4 hours intraoral phase (R). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %SMHR was calculated as : %SMHR = [(E1-R)/(E1-B)]*100. Greater values of %SMHR indicate that greater remineralization has occurred, thus higher values are more favorable.	After 4 hrs following single exposure of treatment
Secondary	% Relative Erosion Resistance (RER; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Inhibit Demineralization of Enamel)	The %RER was calculated to assess the ability of treated enamel specimens to provide a combined benefit in terms of enhanced remineralization and acid resistance of the enamel. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after the second erosive challenge (E2) (E2 is measured for after both 2 and 4 hours of remineralization). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %RER was calculated as : %RER = [(E1-E2)/ (E1-B)]*100. Higher values of %RER indicate greater resistance to erosion, thus higher values are more favorable.	After 4 hrs following single exposure of treatment
Secondary	Enamel Fluoride Uptake (EFU; Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to a Fluoride Free Placebo Dentifrice to Promote Fluoride Uptake in Enamel)	The EFU was measured to determine the amount of fluoride incorporation into the model erosive lesions. Each enamel specimen drilled to a depth of approximately 100 µm using a microdrill, through the entire lesion (four cores per specimen). The enamel powder pooled from four drilling samples was then, dissolved in a known volume of perchloric acid and immediately analyzed for fluoride content using a calibrated fluoride specific electrode. The amount of fluoride-uptake by enamel was calculated based on the amount of fluoride divided by the area of the enamel cores and expressed as microgram fluoride per square centimeter (µgF/cm^2). Higher values of EFU indicate greater incorporation of fluoride into the enamel and are thus more favorable.	After 4 hrs following single exposure of treatment
Secondary	% SMHR (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)	The %SMHR was calculated to assess the changes in mineralization status of enamel specimens. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after 2 and 4 hours intraoral phase (R). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %SMHR was calculated as: %SMHR = [(E1-R)/(E1-B)]*100. Greater values of %SMHR indicate that greater remineralization has occurred, thus higher values are more favorable.	After 4 hrs following single exposure of treatment
Secondary	% RER (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)	The %RER was calculated to assess the ability of treated enamel specimens to provide a combined benefit in terms of enhanced remineralization and acid resistance of the enamel. The mean indent length (micrometer) from five Knoop microindentations within each specimen was measured at baseline (B), after the first erosive challenge (E1), and after the second erosive challenge (E2) (E2 is measured for after both 2 and 4 hours of remineralization). An increase in the indentation length compared to the baseline indicates softening of the enamel surface while decrease in the indentation length represents re-hardening of enamel surface. The %RER was calculated as : %RER = [(E1-E2)/ (E1-B)]*100. Higher values of %RER indicate greater resistance to erosion, thus higher values are more favorable.	After 4 hrs following single exposure of treatment
Secondary	EFU (Comparison of 1150 Ppm Fluoride and 5% KNO3 Dentifrice Relative to Comparator Containing 1100 Ppm Fluoride)	The EFU was measured to determine the amount of fluoride incorporation into the model erosive lesions. Each enamel specimen drilled to a depth of approximately 100 µm using a microdrill, through the entire lesion (four cores per specimen). The enamel powder pooled from four drilling samples was then, dissolved in a known volume of perchloric acid and immediately analyzed for fluoride content using a calibrated fluoride specific electrode. The amount of fluoride-uptake by enamel was calculated based on the amount of fluoride divided by the area of the enamel cores and expressed as microgram fluoride per square centimeter (µgF/cm^2). Higher values of EFU indicate greater incorporation of fluoride into the enamel and are thus more favorable.	After 4 hrs following single exposure of treatment

External Links

•   Related Info
•   Related Info