Clinical Trial Details
— Status: Completed
Administrative data
NCT number |
NCT05516771 |
Other study ID # |
DHF-TaSC |
Secondary ID |
|
Status |
Completed |
Phase |
|
First received |
|
Last updated |
|
Start date |
October 1, 2022 |
Est. completion date |
February 26, 2023 |
Study information
Verified date |
March 2023 |
Source |
Medical University of Vienna |
Contact |
n/a |
Is FDA regulated |
No |
Health authority |
|
Study type |
Observational
|
Clinical Trial Summary
Title: Evaluation of a licensed double-sensor-heat-flux (DHF) non-invasive core temperature
sensor in small children and toddlers undergoing surgery.
CI/PS identification code: DHF-TaSC Device Name: Tcore™ system (Tcore-Adapter MP00999 &
Tcore-Sensor MP 00989) Manufacturer: Drägerwerk AG & CO KGaA Study design: Prospective,
single arm, clinical study
Patients:
- Number: 72
- Age / gender: females and males between 0 and 7 years
- Patients of a tertiary referral, university-affiliated hospital undergoing surgery
Exclusion Criterions:
- Operation site, rash or infection that prevents the application of the heat flux
thermometers.
- Patients and/or legal guardians not willing to participate in the trial.
- Patients older than 7 years Setting: ORs of a tertiary referral, university-affiliated
hospital. Study variables: measurement triplets measured via two double-sensor-heat-flux
(DHF) thermometer the Tcore™ (Dräger, Drägerwerk AG & Co KG, 23558 Lübeck, Germany) one
placed on the forehead and one on the upper belly and temperature measured by a rectally
placed temperature probe.
Description:
Body temperature is important for maintaining normal physiological functions. Inadvertent
hypothermia as well as pyrexia are associated with higher morbidity and mortality.
Consequently, continuous measurement of body temperature is standard of care at intensive
care units (ICUs) and in operation rooms (ORs). The use of core temperature measurements such
as pulmonary catheter (gold standard), esophageal or urinary probes is recommended because of
higher accuracy than non-invasive measuring methods. The double-sensor-heat-flux (DHF)
thermometer the Tcore™ (Dräger, Drägerwerk AG & Co KG, 23558 Lübeck, Germany). The DHF
thermometers consist of two sensors separated by a known thermal resistance. One side is
placed directly at the patient's skin and the other is facing the environment. After some
equilibration time the core temperature can then be calculated. To date no study, exist for
the use of the Tcore™ thermometer in children or toddlers. Children are at higher risk for
hypothermia and perioperative hypothermia is still common in children.(8) The objective is to
find a non-invasive core temperature measurement for children to guide perioperative
temperature management.
Primary Objective (Hypothesis):
Evaluation of the accuracy of the licensed double-sensor-heat-flux (DHF) thermometer the
Tcore™ (Dräger, Drägerwerk AG & Co KG, 23558 Lübeck, Germany) when used for intraoperative
core temperature measurement in small children and toddlers.
The Hypothesis is that each of the two temperature measurements obtained with the Tcore™
(forehead, upper belly) have a high level of agreement(<0.5°C) with the standard of care
temperature measurements via rectal temperature probe.
Our primary objective is to investigate the agreement between the two temperature
measurements obtained with the Tcore™ (Dräger, Drägerwerk AG & Co KGaA, 23558 Lübeck,
Germany) placed on the forehead and the upper belly and temperature measured via a rectally
placed Medical Level 1 disposable General Purpose Temperature Probe (Smiths Medical
Österreich GmbH, Brunn am Gebirge, Austria). Measure triplets of the two Tcore™ sensors and
the rectally placed probe are obtained every 3 minutes for up to 12 consecutive hours or for
the duration the patient spends in the OR and the recovery room. If the observed limits of
agreement (± 1.96 SD around the mean difference), within which 95% of the differences are
expected to fall, are clinically acceptable, the methods are considered to agree. We define
deviations of +/-0.5°C, a priori, to be acceptable for the Bland Altman method comparison
analysis as was done in previous studies.
Intended use The Tcore system is a thermometer intended for non-invasive, continuous
measurement of the core body temperature of children from 5 years of age, adolescents, and
adults. The Tcore system consists of a sensor and an adapter. The adapter is reusable. The
sensor is intended for single use. The Tcore system works in adjusted mode, i.e., the core
body temperature is determined by a dual sensor.
Off-Label/Investigational Use In context of this clinical study the Tcore-system will be
investigated outside its approved and intended use, namely in children below the age of five
and toddlers.
Descriptive statistics:
- For nominal and ordinal data absolute frequencies and percentages, fraction, rate, and
incidence will be calculated, if appropriate.
- Continuous data are described by mean ± standard deviation (SD) in case of approximate
normal distribution, or by median, interquartile range otherwise.
Endpoint analysis:
For the primary objective, a scatterplot of differences between Tcore and standard
measurements and their mean will be produced for each of the two Tcore measurements in
relation to the measurement standard (rectal temperature). If the differences prove to be
approximately independent for the observed range of temperatures, limits of agreement will be
calculated using the method by Zou (2013).(23) If these limits are contained within the
acceptable deviation of +/-0.5°C the respective Tcore measurement method will be considered
acceptable. Irrespective of the success of the investigation of agreement the results for
both Tcore measurement locations will be reported.
For the secondary objective sensitivity and specificity will be calculated with 95%
confidence intervals for each Tcore measurement in relation to the measurement standard.
All study data will be queried from the ICCA and from the database of electronic health
records the Vienna General Hospital information management system (AKIM; "Allgemeines
Krankenhaus Informationsmanagement") (Siemens AG Österreich, Vienna, Austria). Intellispace
Critical Care and Anesthesia. After acquisition, patient data will be anonymized, cleaned,
and stored in a study database.
Patient identification will contain name, sex, and birthdate. This data will be documented in
an excel sheet, protected with a password. All patients will be given a number for
pseudonymization. The verification key will be stored on a separate computer in our
laboratory. Only specially authorized persons (Dr. Sebastian Zeiner and Prof. Oliver
Kimberger) will have access to the data.
All data will be stored on a password secured computer in the laboratory of our department
(Department for Anesthesia) at the Medical University of Vienna.
At any time, medical confidentiality will be fulfilled by all persons involved in this
project.