Outcome
Type |
Measure |
Description |
Time frame |
Safety issue |
Primary |
Safety (Adverse events) |
Incidence of (serious) adverse events and device deficiencies during haemofiltration until 7 days post-filtration |
Continuously starting from 2 hours prior of the start of haemofiltration until 7 days post-filtration |
|
Secondary |
Safety (Blood pressure) |
Systolic, diastolic and mean arterial pressure will be measured continuously using a radial artery catheter. |
From 2 hours prior until 7 hours after start of haemofiltration. |
|
Secondary |
Safety (Heart rate) |
Heart rate will be recorded continuously using a 3-lead ECG. |
Continuously from 2 hours prior until 7 hours after start of haemofiltration. |
|
Secondary |
Safety (Temperature) |
Body temperature will be assessed by using tympanic temperature measurements. |
Every 30 minutes from 2 hours prior until 7 hours after start of haemofiltration. |
|
Secondary |
Safety (Symptoms) |
Clinical symptoms will be scored on a Likert scale (ranging from 0 to 5) in a composite endpoint consisting of headache, nausea, shivering, muscle soreness and lower back pain. Higher numbers indicate more severe symptoms. |
Every 30 minutes from 2 hours prior until 7 hours after start of haemofiltration. |
|
Secondary |
Safety (Immunology) |
The following plasma cytokines will be measured (pg/mL): Tumour necrosis factor (TNF), Interleukin (IL)-6, IL-8, IL-10, IL-1 receptor antagonist (IL-1RA), Monocyte Chemoattractant Protein (MCP)-1, Macrophage Inflammatory Protein (MIP)-1a, MIP-1ß, Interferon-? induced Protein (IP)-10, and Granulocyte Colony-Stimulating Factor (G-CSF) |
Samples will be obtained from 1 hour prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Metal analysis) |
Plasma concentration levels of chromium and manganese will be measured in nmol/L. |
Samples will be obtained from start of haemofiltration, and after 1 hour, 5 hours, 24 hours and 7 days. |
|
Secondary |
Safety (Cell counts) |
Leukocytes (including differentation), erythrocytes and thrombocytes will be measured in *10^9/L. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Haemoglobin and elektrolytes) |
Haemoglobin, sodium, potassium, calcium, phosphate, magnesium, and urea will be measured in mmol/L |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Haematocrit) |
Haematocrit will be measured in L/L. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Coagulation) |
Prothrombin time (PT), activated clotting time (ACT) and activated partial thromboplastin time (APTT) will be measured in seconds. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (INR) |
International Normalized Ratio (INR) will be measured to assess coagulation. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Fibrinogen + albumin) |
Fibrinogen and albumin will be measured in grams/L. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Kidney function) |
Kidney function will be measured in mL/min/1.73m^2. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Markers associated with cellular damage) |
Cellular damage will be assessed by measuring Alanine Aminotransferase (ALAT), Aspartate Aminotransferase (ASAT), Lactate Dehydrogenase (LDH), Creatine kinase (CK), Alkaline phosphatase (AP) |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (C-reactive protein) |
C-reactive protein (CRP) will be measured in mg/L. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|
Secondary |
Safety (Creatinine and iron status) |
Creatinine, iron and total iron binding capacity (TIBC) will be measured in umol/L. |
Samples will be obtained from 2 hours prior until 7 days after start of haemofiltration. |
|