Clinical Trial Details
— Status: Completed
Administrative data
NCT number |
NCT01154257 |
Other study ID # |
09/MRE09/44 |
Secondary ID |
|
Status |
Completed |
Phase |
N/A
|
First received |
|
Last updated |
|
Start date |
June 2010 |
Est. completion date |
June 2011 |
Study information
Verified date |
January 2020 |
Source |
Cardiff and Vale University Health Board |
Contact |
n/a |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
Cleaning the mouth is difficult in critically ill patients who require support from a
breathing machine (ventilator). This is because the plastic (endotracheal) tube which is a
necessary interface between patient and ventilator impedes cleaning. New evidence suggests
that poor oral health may be linked to ventilator associated pneumonia. Throughout the world
both toothbrushes and foam swabs are used to clean the teeth and remove dental plaque,
however it is unknown if one method is more effective than the other. The purpose of this
study is to establish which (if any) method is most effective at removing plaque in this
population of patients.
Description:
Study Objective: The principle aim of this work is to determine whether foam swabs or
toothbrushes offer the most effective method of removing dental plaque in orally intubated
mechanically ventilated patients.
The secondary objective is to profile the microbiological flora in dental plaque,
endotracheal tube and lung. In addition, collection of both plaque samples, used endotracheal
tubes (ETTs) and non-directed bronchoalveolar lavage (NBL) will allow us to determine whether
oral microorganisms contribute to biofilm formation within the ETT and potentially promote
VAP. The findings of this study will not only enhance our knowledge on the organisms involved
in promoting biofilms on ETT, but may also highlight potential management strategies to
reduce their formation.
Study Population: Critically ill adult patients admitted to the intensive care unit at the
University Hospital of Wales, Cardiff in whom mechanical ventilation has been initiated.
Recruitment: All patients satisfying inclusion and exclusion criteria, admitted to the adult
ICU at the University Hospital of Wales from the start date of the study will be considered
eligible for recruitment. Patients identified by the duty consultant will be notified to the
research team. Consent will be obtained and in total 50 patients will be recruited.
Interventions: This is a split mouth design study whereby the intervention (cleaning with a
foam swab or toothbrush) is performed on one side of the mouth. For example foam swab left
side of mouth and toothbrush right side of mouth. Cleaning will be performed daily for a
minimum of 24-hours or until extubation or up to seven days after recruitment, whichever is
the shorter.
Non-directed bronchoalveolar lavages (NBLs) will be taken on a Monday and Thursday and when
clinically indicated (for example a suspected VAP). This involves the insertion of a sterile
suction catheter into the lung, 10-20ml of sterile saline is instilled and drawn back, and
placed in a sterile universal. The sample will be split into two when there is a suspected
infection, one half going to the UHW microbiology laboratory as usual, the other half will be
profiled as part of the study. If there is no suspected infection all of the sample will be
profiled as part of the study.
Methods: Following recruitment, patients will have their teeth cleaned twice a day with
sterile water for 2 minutes using a 'baby toothbrush' and foam swab, the side to which the
cleaning method is allocated will be randomised. One minute of cleaning assigned to each side
of the mouth.
A modified Silness and Loe plaque score (Scannapieco et al 1992) and gingival index (Loe and
Silness 1963) will be recorded prior to cleaning and then each morning following cleaning
throughout the duration of the study. The plaque index will be recorded on the upper and
lower first molars, first bicuspid and central incisors on each side of the mouth from the
buccal surface. The plaque index score will be an average of the six teeth on each side. For
patients with missing index teeth, the remaining teeth in closest proximity will be scored.
The gingival index will be scored on the same teeth.
Following recording of the plaque and gingival index plaque samples will be collected on the
same teeth as used for the plaque score. Samples of supragingival plaque will then be
collected from the gingival third portion of the targeted teeth using a sterile curette prior
to initiation of oral care and then once a day before cleaning. Plaque will immediately be
inoculated into 1ml of microbiological transport medium. The transport medium will be diluted
in a serial decimal manner in phosphate buffered saline prior to inoculation of agar plates
using a spiral plating system (Don Whitley Scientific). The following agars will be used to
culture the microorganisms: Blood Agar (aerobic bacteria), Fastidious Anaerobe Agar
(anaerobic bacteria) and CHROMagar Candida (Candida and yeast species). Differential counts
of lactose fermenting enteric bacteria will be through the use of MacConkey Agar, whilst
Staphylococcus species (coagulase positive and coagulase negative) will be detected using
Mannitol Salt Agar (MSA). The inoculated media will be incubated under appropriate gaseous
environments at 37°C for 48 h (aerobes) or 7 d (anaerobes). A total aerobic microbial count
from each side will be obtained from the blood agars and expressed as total colony forming
units (CFUs).
Identification of each distinct colony morphotype will be through extensive phenotypic
investigation. Tests will involve Gram staining, oxidase and catalase activity and
biochemical profiling through a range of test systems. The biochemical test systems will
include the APICoryne system (Gram-positive bacilli), APIStrep system (catalase-negative
Gram-positive cocci), APIStaph and ID32Staph (catalase-positive Gram-positive cocci).
Oxidase-negative, Gram-negative bacilli will be profiled using the API20E test whilst,
oxidase-positive Gram-negative bacilli will be profiled using the API NE. Fungal organisms
(Candida and yeast species) will be identified based on colony colour and appearance on the
differential medium, CHROMagar and by biochemical profiling with the Auxocolour 2 system
(biorad).
NBLs collected as outlined in the section on interventions above. Identification of the
organisms present within the NBL samples will be done using the cultural methods outlined
above.
If patients are extubated during the study then the endotracheal tube will be collected and
transferred to the laboratory. Processing of ETT will involve dividing each tube into
sections for either quantitative identification of organisms by microbial culture, molecular
analysis or microscopical imaging.
Sections of each ETT will initially be placed in 2 ml of phosphate buffered saline and vortex
mixed for 30 s with sterilised glass beads to disrupt biofilm aggregates. The PBS solution
will then be removed and diluted serial decimally, 106-fold.
Identification of the organisms present within the biofilms will be done using the cultural
methods outlined above, together with supplemental molecular analysis (outlined below).
16S ribosomal RNA gene-defined bacterial contamination of endotracheal tubes Sections from
each region of recovered endotracheal tubes will be analysed using molecular procedures. The
method will involve the extraction of total DNA from 500 µl of the specimens using a
Puregeneâ bacterial DNA isolation kit (Gentra Systems). Universal bacterial primer pairs, d88
and e94 (Paster et al, 2001) and primers specific for target organisms (Porphyromonas
gingivalis, Streptococcus mutans, Pseudomonas aeruginosa and Staphylococcus aureus) will then
be used to amplify the 16S rRNA gene targets within the extracted samples using standard PCR
and reaction conditions. Negative controls will include a reagent control (sterile water as
PCR template) and a sample preparation control (sterile water used in place of the original
sample and exposed to the entire extraction protocol). Positive controls of template DNA from
known species of P. gingivalis, S. aureus and mutans will also be included.
Confocal laser scanning microscopy Sections of the used ETT will also be analysed using
fluorescent in situ hybridization using organism specific Peptide Nucleic Acid (PNA) probes.
Each specific probe will be conjugated with a distinct fluorescent label to allow for spatial
location and distribution of target organisms (S. aureus, P. aeruginosa, Candida albicans, S.
mutans) within the ETT biofilm.
Collection of other data: Baseline demographics of patients will be recorded, including age,
sex, APACHE II score, co-morbidities, days from hospital admission, and recent antibiotic
administration.
A Zsigmondy and DMFT (decayed, missing, filled teeth) score will be recorded by a dental
hygienist during the study to assess the baseline dental status of patients enrolled.
Outcome measures: Primary outcome: Daily plaque and gingival scores following mechanical
cleaning, with identification and quantification of bacteria within plaque. Quantitative
comparisons will be ascertained from the total log transformed CFU counts and plaque and
gingival scores from the two cleaning methods.