Comparative Clinical Evaluation of BioFlx, Zirconia, and Stainless-Steel Crowns in Primary Molars

Dental Restoration Clinical Trial

Official title:

Comparative Clinical Evaluation of BioFlx, Zirconia, and Stainless-Steel Crowns in Primary Molars: A Randomized Controlled Clinical Trial

Clinical Trial Details — Status: Recruiting

Administrative data

• NCT number: NCT06450093
• Other study ID #: A0103024PP
• Status: Recruiting
• Phase: N/A
• Start date: April 4, 2024
• Est. completion date: June 1, 2026

Study information

• Verified date: June 2024
• Source: Mansoura University
• Contact: Heba 0. Elbadry
• Phone: +201116121999
• Email: Hebaaelbadry[@]mans.edu.eg
• Is FDA regulated: No
• Study type: Interventional

Clinical Trial Summary

This study will be conducted to:

Evaluate and compare the clinical success, periodontal changes, and wear of antagonist teeth for three types of prefabricated crowns in primary molars: BioFlx crowns, Zirconia crowns, and Stainless Steel crowns.

Description:

A randomized controlled clinical trial with three parallel groups, will be set up and reported according to the revised Consolidated Standards of Reporting Trials statement. The study will be conducted on 51 children with 51 molars aged between 4 and 7 years with a lower primary molar indicated for crown restoration. The children will be selected from the Pediatric Dental Clinic, Faculty of Dentistry, Mansoura University. They will be randomly divided into three equal groups (17 molars/each). Sequence generation and concealment will be done by a biostatistician who is not involved in the study. Group I (control group) will include stainless steel crowns, group II (study group) will include Zirconia crowns, group III (study group) will include BioFlx crowns. After obtaining the written consent form from the parents or guardians, the children will be randomly enrolled, and teeth will be assigned to the groups to receive the selected crowns. Clinical evaluation will be done concerning crown retention, color stability, secondary caries, periodontal changes, and wear of the opposing natural enamel. All crowns will be evaluated at the 3rd, 6th, 12th, and 18th months.

Recruitment information / eligibility

• Status: Recruiting
• Enrollment: 51
• Est. completion date: June 1, 2026
• Est. primary completion date: October 4, 2025
• Accepts healthy volunteers: Accepts Healthy Volunteers
• Gender: All
• Age group: 4 Years to 7 Years

Eligibility

Inclusion Criteria:

• Children who are free from any systemic disease.

• Children with a carious lower primary molar indicated for crown restoration.

• Teeth with an intact antagonist and neighboring primary molar.

• Cooperative children with scores 1 and 2 (positive or definitely positive) according to Frankl's behavior rating scale.

Exclusion Criteria:

• Children with extremely poor oral hygiene.

• Teeth showing radiographical furcation involvement or root resorption.

• Children with para-functional habits, bruxism, or deep bite.

• Teeth with inadequate non-restorable crown structure.

Related Conditions & MeSH terms

• Dental Restoration

Intervention

Other:
• Preformed stainless steel crown.
A well-fitted preformed stainless-steel crown will be chosen by measuring the mesiodistal dimension of the tooth or its contralateral counterpart, using a graduated periodontal probe for guidance. (6) Tooth preparation will be carried out with #835 diamond fissure bur to reduce occlusal surface up to 1 to 1.5 mm. The interproximal reduction will be made mesially and distally using #169 L tapered diamond bur around 0.5 mm to clear the contact area creating a feather edge finish line. The selected crown size will be checked, and a trial fit will be done before cementation. The crown will be cemented using self-cured RMGI luting cement. The excess will be removed, and proper occlusion will be checked.
• Preformed zirconia crown
The material for crown restoration for this group is the preformed zirconia crown. Tooth preparation will be started by occlusal reduction (1 to 1.5 mm) using #835 diamond fissure bur. The interproximal reduction will be done mesially and distally with #169 L tapered diamond bur in such a way that a straight probe passes freely through the contact area. Rounding of line angles will be done and a knife-edge finish margin of the proximal surface will be obtained avoiding any ledge formation. The selected crown will be placed and checked for a passive fit. Consistent firm finger pressure will be applied during cementation with self-cured RMGI luting cement. Finally, crown placement will be checked.
• Preformed BioFlx crown
The prefabricated BioFlx crown will be used in this group. A similar-sized preformed crown will be selected. Tooth preparation will be carried out similarly to traditional SSCs with #835 diamond fissure bur for occlusal reduction by 1-1.5 mm including the central groove. The proximal preparation will be done mesially and distally with #169 L tapered diamond bur around 0.5 mm to clear the contact area creating a feather edge finish line. Placement of the crown will be achieved by a snug fit. Crown cementation will be carried out using self-cured RMGI luting cement and the excess cement will be removed using a floss or an explorer. (13) Finally, crown placement will be checked

Locations

Country	Name	City	State
Egypt	Faculty of Dentistry, Mansoura University.	Mansoura	Dakahlia

Sponsors (1)

Lead Sponsor	Collaborator
Mansoura University

Country where clinical trial is conducted

Egypt, 

Outcome

Type	Measure	Description	Time frame	Safety issue
Primary	Crown retention	The crown retention will be measured concerning the proper adaptation of the crown or the complete crown loss according to the following: 0 = present.; 1 = absent.	After 3, 6,12,18 months
Primary	Color stability	The color stability will be evaluated using one crown from the original kit as a standard that will be held up to each crown restoration for color comparison according to the following: 0= Unchanged.; 1= Minor deviation from original. 2 = Unacceptable discoloration.	After 3, 6,12,18 months
Primary	Secondary caries	Secondary caries will be measured according to USPHS by visual inspection with an explorer to inspect if there is evidence of caries with the margin of the crown restoration according to the following: 0 = no caries; 1 = caries present	After 3, 6, 12,18 months
Primary	Gingival Index (Periodontal Changes)	The GI (Gingival index) will be measured by the William Gingival Probe; the values will be recorded according to the following: 0 = normal gingiva; = mild inflammation: a slight change in color, slight edema, no bleeding on probing; = moderate inflammation: redness, edema, glazing, or bleeding on probing; = severe inflammation: marked redness or edema, a tendency toward spontaneous bleeding, and ulceration.	After 3, 6, 12 ,18 months
Primary	Periodontal Index (Periodontal changes)	The PI (Periodontal Index) will be measured by the William Gingival probe; the values will be recorded according to the following: 0 = no plaque; 1= film at the gingival margin and adjacent tooth 2 = moderate accumulation of plaque 3 = abundance of plaque.	After 3, 6, 12 ,18 months
Primary	Periodontal pocket depth (Periodontal changes)	The PPD will be measured using a manual periodontal probe (UNC. 15 mm) according to the following: The pocket depth will be measured in mesiobuccal, distobuccal, mesiolingual, and distolingual areas. The periodontal probe will be inserted into the gingival sulcus parallel to the longitudinal axis of the tooth and then move in a walking fashion.	After 3, 6, 12 ,18 months
Primary	Wear of the opposing natural enamel.	To evaluate the wear of the antagonistic natural enamel of the primary molar, alginate impressions will be taken immediately (baseline) and 1 year after cementation of the crowns. The resulting casts will be scanned using a 3D scanner and 3D software that will be used to calculate the maximum amount of linear wear using image superimposition techniques. The occlusal points of the crowns will be recorded in the software for measurements and comparisons, then it will be transformed into Standard Tessellation Language (STL) file format by the software	After 12 months