Outcome
Type |
Measure |
Description |
Time frame |
Safety issue |
Primary |
Geometric Mean Ratios (GMRs) of Full-Length S-Binding Immunoglobulin G (IgG) Concentrations Between Individual US Lots 1, 2, and 3 at 1 Month After Dose 2: Primary Study |
Geometric mean concentration of full-length S-binding IgG level for individual US lots (US lots 1, 2, and 3) was determined and reported in the descriptive section. Assay results below the lower limit of quantitation (LLOQ) were set to 0.5*LLOQ. GMRs were reported in the statistical analysis section and was calculated as ratio of Geometric Mean Concentrations (GMCs) of individual US Lots BNT162b2 30 mcg: US Lot 1, BNT162b2 30 mcg: US Lot 2 and BNT162b2 30 mcg: US Lot 3. |
1 Month after Dose 2 |
|
Primary |
Geometric Mean Ratios (GMRs) of Full-Length S-Binding IgG Concentrations Between EU Lot and Pooled US Lots at 1 Month After Dose 2: Primary Study |
Geometric mean concentration of full-length S-binding IgG level for EU lot and pooled US lots (BNT162b2 30 mcg: US Lot 1, BNT162b2 30 mcg: US Lot 2 and BNT162b2 30 mcg: US Lot 3 reporting arm) were determined and reported in the descriptive section. Assay results below the LLOQ were set to 0.5*LLOQ. GMRs were reported in the statistical analysis section and was calculated as ratios of GMCs of BNT162b2 30 mcg: EU Lot and pooled US Lots (BNT162b2 30 mcg: US Lot 1, BNT162b2 30 mcg: US Lot 2 and BNT162b2 30 mcg: US Lot 3 reporting arm). |
1 Month after Dose 2 |
|
Primary |
Geometric Mean Ratios (GMRs) of SARS-CoV-2 Neutralizing Titers Between 20-microgram Dose and 30-microgram Dose at 1 Month After Dose 2: Primary Study |
Geometric mean titer for SARS-CoV-2 neutralizing titers for 20 mcg dose and 30 mcg dose of US Lot 1 was determined and reported in the descriptive section. GMTs and 2-sided 95% CIs were calculated by exponentiating the least square (LS) mean of the titers and corresponding CIs based on linear regression model. Assay results below the LLOQ were set to 0.5*LLOQ. GMRs were reported in the statistical analysis section and were calculated as the ratio of geometric mean titer of the 20-mcg dose (US Lot 1) to the geometric mean titer of the 30 mcg dose (US Lot 1). |
1 Month after Dose 2 |
|
Primary |
Percentage of Participants With Local Reactions Within 7 Days After Dose 1: Primary Study |
Local reactions were collected by the participant using an electronic diary. Local reactions included redness, swelling, and pain at injection site after Dose 1. Redness, swelling, and pain at injection site after Dose 1 were reported. |
Within 7 days after Dose 1 |
|
Primary |
Percentage of Participants With Local Reactions Within 7 Days After Dose 2: Primary Study |
Local reactions were collected by the participant using an electronic diary. Local reactions included redness, swelling, and pain at injection site after Dose 2. Redness, swelling, and pain at injection site after Dose 2 were reported. |
Within 7 days after Dose 2 |
|
Primary |
Percentage of Participants With Local Reactions Within 7 Days After Any Dose: Primary Study |
Local reactions were collected by the participant using an electronic diary. Local reactions included redness, swelling, and pain at injection site after each vaccination. Redness, swelling, and pain at injection site after any dose were reported. |
Within 7 days after any dose |
|
Primary |
Percentage of Participants With Local Reactions Within 7 Days After Dose 3: Booster Study |
Local reactions were collected by the participant using an electronic diary. Local reactions included redness, swelling, and pain at injection site after Dose 3. Redness, swelling, and pain at injection site after Dose 3 were reported. |
Within 7 days after Dose 3 |
|
Primary |
Percentage of Participants With Systemic Events Within 7 Days After Dose 1: Primary Study |
Systemic events were reported using an electronic diary. Fever was defined as temperature >=38.0 degree Celsius (C) and categorized as >=38.0 to 38.4 C; >38.4 to 38.9 C; >38.9 to 40.0 C; >40.0 C. Systemic events including fever, fatigue, headache, chills, new or worsened muscle pain, new or worsened joint pain, vomiting, diarrhea, and use of antipyretic/analgesic medication after Dose 1 were reported. |
Within 7 days after Dose 1 |
|
Primary |
Percentage of Participants With Systemic Events Within 7 Days After Dose 2: Primary Study |
Systemic events were reported using an electronic diary. Fever was defined as temperature >=38.0 C and categorized as >=38.0 to 38.4 C; >38.4 to 38.9 C; >38.9 to 40.0 C; >40.0 C. Systemic events including fever, fatigue, headache, chills, new or worsened muscle pain, new or worsened joint pain, vomiting, diarrhea, and use of antipyretic/analgesic medication after Dose 2 were reported. |
Within 7 days after Dose 2 |
|
Primary |
Percentage of Participants With Systemic Events Within 7 Days After Any Dose: Primary Study |
Systemic events were reported using an electronic diary. Fever was defined as temperature >=38.0 C and categorized as >=38.0 to 38.4 C; >38.4 to 38.9 C; >38.9 to 40.0 C; >40.0 C. Systemic events including fever, fatigue, headache, chills, new or worsened muscle pain, new or worsened joint pain, vomiting, diarrhea, and use of antipyretic/analgesic medication after any dose were reported. |
Within 7 days after any dose |
|
Primary |
Percentage of Participants With Systemic Events Within 7 Days After Dose 3: Booster Study |
Systemic events were reported using an electronic diary. Fever was defined as temperature >=38.0 C and categorized as >=38.0 to 38.4 C; >38.4 to 38.9 C; >38.9 to 40.0 C; >40.0 C. Systemic events including fever, fatigue, headache, chills, new or worsened muscle pain, new or worsened joint pain, vomiting, diarrhea, and use of antipyretic/analgesic medication after Dose 3 were reported. |
Within 7 days after Dose 3 |
|
Primary |
Percentage of Participants With Adverse Events (AEs) and Serious Adverse Events (SAEs) From Dose 1 to 1 Month After Dose 2: Primary Study |
An AE was any untoward medical occurrence in a participant who received investigational product without regard to possibility of causal relationship. SAE was an AE resulting in any of the following outcomes or deemed significant for any other reason: death; initial or prolonged inpatient hospitalization; life-threatening experience (immediate risk of dying); persistent or significant disability/incapacity; congenital anomaly or that was considered to be an important medical event. |
Day 1 of Dose 1 up to 1 Month after Dose 2 (for a maximum of 2 months) |
|
Primary |
Percentage of Participants With Adverse Events (AEs) and Serious Adverse Events (SAEs) From Dose 3 to 1 Month After Dose 3: Booster Study |
An AE was any untoward medical occurrence in a participant who received investigational product without regard to possibility of causal relationship. SAE was an AE resulting in any of the following outcomes or deemed significant for any other reason: death; initial or prolonged inpatient hospitalization; life-threatening experience (immediate risk of dying); persistent or significant disability/incapacity; congenital anomaly or that was considered to be an important medical event. |
From Dose 3 to 1 Month after Dose 3 (for a maximum of 35 days) |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 Reference-strain at Baseline: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
Baseline (prior to Dose 1 of Primary study) |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 Reference-strain 1 Month After Dose 2: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
1 Month after Dose 2 of primary study |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 Reference-strain Before Dose 3: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
Before Dose 3 |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 Reference-strain 1 Week After Dose 3: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
1 Week after Dose 3 |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 Reference-strain 1 Month After Dose 3: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
1 Month after Dose 3 |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 B.1.351-strain at Baseline: Booster Study |
GMTs and 2-sided 95% CIs were planned to be calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). |
Baseline (prior to Dose 1 of Primary study) |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 B.1.351-strain 1 Month After Dose 2: Booster Study |
GMTs and 2-sided 95% CIs were planned to be calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). |
1 Month after Dose 2 of primary study |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 B.1.351-strain Before Dose 3: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
Before Dose 3 |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 B.1.351-strain 1 Week After Dose 3: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
1 Week after Dose 3 |
|
Primary |
Geometric Mean Titers (GMTs) of SARS-CoV-2 B.1.351-strain 1 Month After Dose 3: Booster Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5 × LLOQ. |
1 Month after Dose 3 |
|
Primary |
Geometric Mean Concentrations (GMCs) of Full-length S-binding IgG Levels at Baseline: Booster Study |
GMCs were calculated by exponentiating the mean logarithm of the concentrations and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Baseline (prior to Dose 1 of Primary study) |
|
Primary |
Geometric Mean Concentrations (GMCs) of Full-length S-binding IgG Levels 1 Month After Dose 2: Booster Study |
GMCs were calculated by exponentiating the mean logarithm of the concentrations and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
1 Month after Dose 2 of primary study |
|
Primary |
Geometric Mean Concentrations (GMCs) of Full-length S-binding IgG Levels Before Dose 3: Booster Study |
GMCs were calculated by exponentiating the mean logarithm of the concentrations and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Before Dose 3 |
|
Primary |
Geometric Mean Concentrations (GMCs) of Full-length S-binding IgG Levels 1 Week After Dose 3: Booster Study |
GMCs were calculated by exponentiating the mean logarithm of the concentrations and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
1 Week after Dose 3 |
|
Primary |
Geometric Mean Concentrations (GMCs) of Full-length S-binding IgG Levels 1 Month After Dose 3: Booster Study |
GMCs were calculated by exponentiating the mean logarithm of the concentrations and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
1 Month after Dose 3 |
|
Primary |
Geometric Mean Fold Rises (GMFRs) in Full-length S-binding IgG Levels From 1 Month After Dose 2 to 1 Week After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean concentration of IgG at 1 week after Dose 3 to the geometric mean concentration of IgG at 1 month after dose 2. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
From 1 Month after Dose 2 to 1 Week after Dose 3 |
|
Primary |
Geometric Mean Fold Rises (GMFRs) in Full-length S-binding IgG Levels From 1 Month After Dose 2 to 1 Month After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean concentration of IgG at 1 month after Dose 3 to the geometric mean concentration of IgG at 1 month after dose 2. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
From 1 Month after Dose 2 to 1 Month after Dose 3 |
|
Primary |
Geometric Mean Fold Rises (GMFRs) in Full-length S-binding IgG Levels Before Dose 3 to 1 Week After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean concentration of IgG at 1 week after Dose 3 to the geometric mean concentration of IgG before dose 3. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Before Dose 3 to 1 Week after Dose 3 |
|
Primary |
Geometric Mean Fold Rises (GMFRs) in Full-length S-binding IgG Levels Before Dose 3 to 1 Month After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean concentration of IgG at 1 month after Dose 3 to the geometric mean concentration of IgG before dose 3. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Before Dose 3 to 1 Month after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 Reference-strain From 1 Month After Dose 2 to 1 Week After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 reference-strain at 1 week after Dose 3 to the geometric mean titers of SARS-CoV-2 reference-strain at 1 month after dose 2. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
From 1 Month after Dose 2 to 1 Week after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 Reference-strain From 1 Month After Dose 2 to 1 Month After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 reference-strain at 1 month after Dose 3 to the geometric mean titers of SARS-CoV-2 reference-strain at 1 month after dose 2. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
From 1 Month after Dose 2 to 1 Month after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 Reference-strain Before Dose 3 to 1 Week After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 reference-strain at 1 week after Dose 3 to the geometric mean titers of SARS-CoV-2 reference-strain before dose 3. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Before Dose 3 to 1 Week after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 Reference-strain Before Dose 3 to 1 Month After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 reference-strain at 1 month after Dose 3 to the geometric mean titers of SARS-CoV-2 reference-strain before dose 3. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Before Dose 3 to 1 Month after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 B.1.351-strain From 1 Month After Dose 2 to 1 Week After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 B.1.351-strain at 1 week after Dose 3 to the geometric mean titers of SARS-CoV-2 B.1.351-strain at 1 month after dose 2. GMFRs were planned to be calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). |
From 1 Month after Dose 2 to 1 Week after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 B.1.351-strain From 1 Month After Dose 2 to 1 Month After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 B.1.351-strain at 1 month after Dose 3 to the geometric mean titers of SARS-CoV-2 B.1.351-strain at 1 month after dose 2. GMFRs were planned to be calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). |
From 1 Month after Dose 2 to 1 Month after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 B.1.351-strain Before Dose 3 to 1 Week After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 B.1.351-strain at 1 week after Dose 3 to the geometric mean titers of SARS-CoV-2 B.1.351-strain before dose 3. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Before Dose 3 to 1 Week after Dose 3 |
|
Primary |
Geometric Mean Fold Rise (GMFRs) in SARS-CoV-2 B.1.351-strain Before Dose 3 to 1 Month After Dose 3: Booster Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 B.1.351-strain at 1 month after Dose 3 to the geometric mean titers of SARS-CoV-2 B.1.351-strain before dose 3. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
Before Dose 3 to 1 Month after Dose 3 |
|
Primary |
Percentage of Participants With Seroresponse to Reference Strain at 1 Month After Dose 2: Booster Study |
Seroresponse was defined as greater than equal to (>=) 4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. If the baseline measurement was below LLOQ, a post vaccination measurement of >=4*LLOQ was considered a seroresponse. Exact 2-sided 95% CI was based on the Clopper and Pearson method. |
1 Month after Dose 2 |
|
Primary |
Percentage of Participants With Seroresponse to Reference Strain Before Dose 3: Booster Study |
Seroresponse was defined as >=4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. If the baseline measurement was below LLOQ, a post vaccination measurement of >=4*LLOQ was considered a seroresponse. Exact 2-sided 95% CI was based on the Clopper and Pearson method. |
Before Dose 3 |
|
Primary |
Percentage of Participants With Seroresponse to Reference Strain 1 Week After Dose 3: Booster Study |
Seroresponse was defined as >=4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. If the baseline measurement was below LLOQ, a post vaccination measurement of >=4*LLOQ was considered a seroresponse. Exact 2-sided 95% CI was based on the Clopper and Pearson method. |
1 Week after Dose 3 |
|
Primary |
Percentage of Participants With Seroresponse to Reference Strain 1 Month After Dose 3: Booster Study |
Seroresponse was defined as >=4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. If the baseline measurement was below LLOQ, a post vaccination measurement of >=4*LLOQ was considered a seroresponse. Exact 2-sided 95% CI was based on the Clopper and Pearson method. |
1 Month after Dose 3 |
|
Primary |
Percentage of Participants With Seroresponse to B.1.351 Variant Strain at 1 Month After Dose 2: Booster Study |
Seroresponse was defined as >=4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. |
1 Month after Dose 2 |
|
Primary |
Percentage of Participants With Seroresponse to B.1.351 Variant Strain Before Dose 3: Booster Study |
Seroresponse was defined as >=4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. |
Before Dose 3 |
|
Primary |
Percentage of Participants With Seroresponse to B.1.351 Variant Strain 1 Week After Dose 3: Booster Study |
Seroresponse was defined as >=4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. |
1 Week after Dose 3 |
|
Primary |
Percentage of Participants With Seroresponse to B.1.351 Variant Strain 1 Month After Dose 3: Booster Study |
Seroresponse was defined as >=4-fold increase from baseline (before Dose 1 in primary study) to the specified time point. |
1 Month after Dose 3 |
|
Secondary |
Geometric Mean Concentrations (GMCs) of Full-Length S-Binding IgG Levels at Baseline and 1 Month After Dose 2 for 30 mcg Dose of BNT162b2: Primary Study |
GMCs were calculated by exponentiating the mean logarithm of the concentrations and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5* LLOQ. |
Baseline (before Dose 1), 1 Month after Dose 2 |
|
Secondary |
Geometric Mean Fold Rises (GMFRs) in Full-Length S-Binding lgG Levels From Baseline to 1 Month After Dose 2 for 30 mcg Dose of BNT162b2: Primary Study |
GMFRs were defined as ratios of the geometric mean concentration of IgG at 1 month after Dose 2 to the geometric mean concentration of IgG at Baseline. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5*LLOQ. |
From Baseline (before Dose 1) up to 1 Month after Dose 2 |
|
Secondary |
Geometric Mean Titers (GMT) of SARS-CoV-2 Neutralizing Titers at Baseline and 1 Month After Dose 2 for 20 mcg and 30 mcg Dose of BNT162b2 From US Lot 1: Primary Study |
GMTs and 2-sided 95% CIs were calculated by exponentiating the mean logarithm of the titers and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5* LLOQ. |
Baseline (before Dose 1), 1 Month after Dose 2 |
|
Secondary |
Geometric Mean Fold Rises (GMFRs) in SARS-CoV-2 Neutralizing Titers From Baseline to 1 Month After Dose 2 for 20 mcg and 30 mcg Dose of BNT162b2 From US Lot 1: Primary Study |
GMFRs were defined as ratios of the geometric mean titers of SARS-CoV-2 at 1 month after Dose 2 to the geometric mean titers of SARS-CoV-2 at Baseline. GMFRs were calculated by exponentiating the mean logarithm of fold rises and the corresponding CIs (based on the Student t distribution). Assay results below the LLOQ were set to 0.5* LLOQ. |
From Baseline (before Dose 1) up to 1 Month after Dose 2 |
|