Clinical Trials Logo

Clinical Trial Details — Status: Completed

Administrative data

NCT number NCT01882751
Other study ID # Komistek 2
Secondary ID
Status Completed
Phase
First received
Last updated
Start date June 2013
Est. completion date August 2017

Study information

Verified date October 2023
Source Restor3D
Contact n/a
Is FDA regulated No
Health authority
Study type Observational

Clinical Trial Summary

A better understanding of knee joint kinematics is important to explain the premature polyethylene wear failures within total knee arthroplasties (TKAs) and to help design a prosthesis that most closely approximates the normal knee. Previously, most experimental studies of knee kinematics have involved cadaveric, in vitro analyses, or have not tested the knee in a weight-bearing mode. Others have used exoskeletal linkages and skin markers that permit error due to undesired motions between markers and the underlying bone. More recently, fluoroscopy has been used to assess in vivo kinematics for subjects having a TKA. ConforMIS has attempted to follow a clearly different path than the major orthopaedic companies. They have chosen to offer patients a personalized knee implant based off of each patient's femoral and tibial bone geometry. The hypothesis is that these subjects will experience a more normal-like kinematic pattern, eliminating paradoxical anterior sliding during weight-bearing knee flexion. Therefore, the objective for this study is to analyze the in vivo kinematics for 25 patients implanted with a personalized ConforMIS TKA and 25 patients implanted with a traditional TKA design to determine if there are any kinematic differences between these TKA designs.


Description:

Each subject will be asked to perform five activities in one continuous sequence: (1) stand up from a chair, (2) walk up stairs, (3) walk down stairs, (4) level walking, and (5) a deep knee bend. Subjects will be video recorded from the waist down while performing the activities. The speed level of each trial will be based on the comfort level of the patient. The fluoroscopic images will be stored digitally for subsequent analysis on secure servers and workstations at the University of Tennessee.


Recruitment information / eligibility

Status Completed
Enrollment 66
Est. completion date August 2017
Est. primary completion date July 2017
Accepts healthy volunteers No
Gender All
Age group 40 Years to 70 Years
Eligibility Inclusion Criteria: - At least 6 months post-op - Between 40-70 years of age - Body weight of less than 250lbs - TKA patients will be judged clinically successful with an American Knee Society score of greater than 90 - Must have post-op passive flexion of 100 degrees with no ligamentous laxity or pain - Participants must be able to walk on level ground without aids and ascend/descend stairs without assistance. - Subjects will either a ConforMIS™ TKA or a traditional TKA manufactured by any other orthopaedic company. - Patients must be between 160cm (5'3) and 193cm (6'4) tall. Exclusion criteria: - Subjects not willing to sign the Informed Consent and HIPAA forms to participate in the study - BMI >40 - Pregnant females - Surgical procedures conducted within the past 6 months other than TKA - Subjects from the physician's list who do not meet study requirements - Unwilling or unable to comply with study requirements - Participation in another clinical study which would confound results

Study Design


Related Conditions & MeSH terms


Intervention

Device:
Conformis CR Total Knee Replacement
iTotal CR by Conformis
Off the Shelf
A standard knee replacement not using ConforMIS' iFit technology

Locations

Country Name City State
United States Tennessee Orthopaedic Clinics Knoxville Tennessee
United States University of Tennessee Knoxville Tennessee

Sponsors (1)

Lead Sponsor Collaborator
Restor3D

Country where clinical trial is conducted

United States, 

Outcome

Type Measure Description Time frame Safety issue
Primary Kinematic Patterns during gait There are multiple parameters captured by fluoroscopy that will be assessed during these 4 activities including:
Anterior/posterior medial and lateral condyle contact positions
Axial rotation of the femoral component relative to the tibial component
Condylar lift-off will be determined by measuring the distances from the medial and lateral condyles to the polyethylene insert surface
Weight-bearing range-of-motion.
at least 6 months post surgery
Primary Kinematic patterns during deep knee bend There are multiple parameters captured by fluoroscopy that will be assessed during these 4 activities including:
Anterior/posterior medial and lateral condyle contact positions
Axial rotation of the femoral component relative to the tibial component
Condylar lift-off will be determined by measuring the distances from the medial and lateral condyles to the polyethylene insert surface
Weight-bearing range-of-motion.
at least 6 months post surgery
Primary Kinematics patterns during going up and down stairs There are multiple parameters captured by fluoroscopy that will be assessed during these 4 activities including:
Anterior/posterior medial and lateral condyle contact positions
Axial rotation of the femoral component relative to the tibial component
Condylar lift-off will be determined by measuring the distances from the medial and lateral condyles to the polyethylene insert surface
Weight-bearing range-of-motion.
at least 6 months post surgery
Primary Kinematics patterns during getting up from chair There are multiple parameters captured by fluoroscopy that will be assessed during these 4 activities including:
Anterior/posterior medial and lateral condyle contact positions
Axial rotation of the femoral component relative to the tibial component
Condylar lift-off will be determined by measuring the distances from the medial and lateral condyles to the polyethylene insert surface
Weight-bearing range-of-motion.
at least 6 months post surgery
See also
  Status Clinical Trial Phase
Completed NCT02043132 - Tranexamic Acid in Reverse Total Shoulder Arthroplasty Phase 2/Phase 3
Recruiting NCT02255331 - Using MRI To Detect Soft Tissue Reactions And Implant Integration As Related To Implant Modularity
Completed NCT01442298 - A Comparison Between an Individual Low Tourniquet Pressure Versus a Standard Pressure During Total Knee Arthroplasty N/A
Completed NCT02774174 - The Evaluation of the METS™ Proximal Humeral System
Withdrawn NCT02054936 - Evaluation of Wound Drainage After Knee or Hip Arthroplasty Phase 4
Recruiting NCT01542580 - A Prospective, Clinical Investigation of the Vanguard 360 Revision Knee
Completed NCT02598700 - Correlation of Spinopelvic Parameters and Acetabular Cup Orientation
Completed NCT01820611 - Arcos Revision Stem: Evaluation of Clinical Performance
Completed NCT01514318 - Encore Revelation Hip Stem N/A
Completed NCT02124031 - Mexican Initiative of Patients With Osteoarthritis and Rheumatoid Arthritis (IMPACTAR) N/A
Completed NCT01373112 - Articulating Versus Static Antibiotic Loaded Spacers for the Treatment of Prosthetic Knee Infection N/A
Completed NCT01373099 - Study of Antibiotic Spacer Design to Treat Infection After Hip Replacement N/A