Clinical Trial Details
— Status: Recruiting
Administrative data
NCT number |
NCT04297761 |
Other study ID # |
19-2078 |
Secondary ID |
|
Status |
Recruiting |
Phase |
N/A
|
First received |
|
Last updated |
|
Start date |
May 25, 2021 |
Est. completion date |
December 2027 |
Study information
Verified date |
April 2024 |
Source |
University of North Carolina, Chapel Hill |
Contact |
Robin Kaminski |
Phone |
(919) 966-0604 |
Email |
Kaminski.Robin[@]epa.gov |
Is FDA regulated |
No |
Health authority |
|
Study type |
Interventional
|
Clinical Trial Summary
MASKOFF Clinical Trials 8/22/23
Brief Summary:
Purpose: The study is designed to investigate cardiovascular effects of young healthy human
subjects exposed to wood smoke.
Participants: Approximately 80 young (18-35 years old) healthy subjects to complete.
Procedure (methods): After consenting to participate in the study, subjects will be exposed
first to filtered air and on the next exposure day to approximately 500 µg/m^3 wood smoke.
Both exposures will be 2 hours long with alternating 15 min of exercise (cycle ergometer) and
15 min rest period. The exercise level will be adjusted to achieve approximately 12 L/min/m^2
minute ventilation. Venous blood samples and measurements of lung, cardiac and vascular
function will be made prior to and immediately following each exposure. Induced sputum
samples and nasal epithelial lining fluid will be collected approximately 24 hours post each
exposure.
Description:
Wood smoke pollution is a common problem across the world, including in the US. This wood
smoke comes from people using wood to heat and cook, as well as from wildfires. The purpose
of this research study is to investigate the cardiovascular effects of exposure to wood smoke
in young, healthy human subjects. Results from this study will also increase understanding of
how wood smoke exposure adversely affects the functioning of the human cardiovascular and
respiratory systems. This understanding may be especially important for patients with
cardiopulmonary diseases.
There is a likelihood that due to scheduling conflicts and other unexpected scenarios (such
as government shutdowns etc.) that the time between consenting and participation could be
delayed, although every effort will be made to accommodate subjects without hurting the
integrity of the study. There will be 5 sessions, including a consenting session which will
last for about 5 hours. The two exposure-day sessions will last approximately 8-9 hours each
and will occur 48 hours apart. There will also be two follow-up visits lasting approximately
4-hours each on the day following the participants' last exposure.
Before consenting to be part of this study, the potential participant must read all consent
forms in entirety. The research and medical staff will then answer all of the participants'
questions and explain the risks involved in this study to satisfaction.
The participant should have already undergone a general physical examination to ensure that
said participant is a suitable candidate for this study. Participants who were assigned
female at birth will be asked about menstrual history and a pregnancy test will be performed.
This will be repeated on each exposure day if more than 7 days have lapsed since the last
pregnancy test at the HSF.
Consenting Day:
The consent day visit is expected to last about 4-5 hours. The investigators will review the
inclusion and exclusion criteria and the participants' medical conditions and current
medications. The investigators will go over the study in detail so the participant is as
informed as possible before consenting to being part of this study. The participant will then
sign all consent forms and receive one set of signed copies. The participant will also tour
the exposure chambers following the consenting process. After consenting, the participant's
vital signs and approximately 4 ml of blood will be collected. This blood will be measured
for specific analytes to ensure the participant can safely complete the study.
The participant will perform a breathing test (spirometry) to measure lung function. The
participant will breathe through a filter into a plastic tube, while being coached by members
of the study team. Participants will be asked to take a full breath in, follow by a hard and
fast maximal exhalation. The participant will be asked to do this several times. This test
measures the volume of air that can be exhaled and the rate of airflow during exhalation
after a maximal inhalation. This is a method to measure lung function which must meet certain
criteria (lung capacity and volume) prior to exposure in order for the participant to remain
in the study. Lung function test results should be equal to or greater than 80% of the
reference value to continue participation in the study.
As part of the consenting day, participants will undergo exercise training to determine the
level of exercise needed to reach the target minute ventilation for this study. Participants
will pedal on an exercise bike at various levels of resistance for 5-15 minute periods while
minute ventilation (how much air is being inhaled per minute) is measured at regular
intervals using a mouthpiece tachometer. Displacement bands will be placed around the
participants' torso to measure minute ventilation via chest expansion while exercising.
Participants will also undergo procedures for nasal epithelial lining fluid sampling (nasal
mucosa) and induced sputum collection. It is known that less than half of normal, healthy
people can produce a sputum sample that is of acceptable quality for analysis. The study will
end if a participant is a non-producer or the quality of the sputum produced does not meet
the study inclusion criteria. In this event, the participant will be reimbursed for the
consenting session.
Participants who meet all inclusion criteria will be contacted with further instructions.
It may be possible to reschedule in the event of severe weather, the participant becomes ill
(for example, a cold or respiratory infection), or other unforeseen circumstances.
Exposure days:
The study team will contact and send reminders to all participants a few days before the
exposure session. Participants should avoid smoke, fumes, alcohol, and strenuous exercise 24
hours prior to all visits, and abstain from pan fried or grilled meat after midnight of the
exposure day.
Participants will be asked to eat a light breakfast and arrive at the EPA medical station by
8:00 am. The study team will make ensure that all participants understand the importance of
arriving earlier to ensure the investigators have adequate time to process all samples and
data. Participants who arrive after 8:00 am will be unenrolled from the study.
Prior to exposure, a study team member will collect the follow from each participant:
1. Vital signs (heart rate, respiratory rate, blood pressure, oxygen saturation level) and
an electronic symptom questionnaire.
2. Heart Rate Variability via a Holter monitor. A study team member will attach ten
electrocardiogram (ECG) leads to the participants' chest. It may be necessary to clean
and shave areas of the chest where these leads will be placed. Participants will be
asked to not apply excessive deodorant, skin lotions, and body sprays on as these may
interfere with data recording. The leads will be connected to 2 monitors (small
recording devices about the size and weight of a cell phone) to obtain heart rate and
rhythm readings. It is preferable that the electrodes will stay in place for
approximately 4 days as these measurements will be collected several times during the
study, however, participants will be given the option to remove the electrodes by the
end of each exposure day. To begin recording, participants will be asked to recline
quietly for 30 minutes. It is important that the participant does not fall asleep during
this 30-minute period. These measurements will allow the investigators to determine
whether wood smoke exposure causes small changes in the ability of your nervous system
to regulate how your heart beats.
3. Retinal Imaging. An ophthalmic camera will be employed to collect retinal images of all
participants before and after each exposure and on the follow-up visit. The participants
chin will be rested in front of the camera, while a study team member takes pictures of
both eyes. Glasses or contacts must be removed for this test. Participants will be
notified to bring contact lens cases and solutions.
4. The study team will continue to store the images for future undesignated studies given
the participant's consent. This allows the team to make the best use of the images
collected from subjects. Participants will be given a separate consent form for this
storage and do not have to allow images to be stored indefinitely in order to
participate in this study.
5. Blood Draw. Approximately 60 mLof blood will be drawn (about 4 tablespoons) on the train
day, before and after each exposure and on the follow-up visit. The study team will test
this blood to see blood cell function is affected by exposure to wood smoke. A small
portion of the blood sample will be used to measure the relative content of various
fatty acids present in blood. With permission, the investigators will also store some of
the blood obtained during the study for yet-to-be-determined tests.
6. Spirometry will be performed following the same procedure used on the consent day.
7. Ventilation Rate. BioPac bands will be placed around the participants' thorax and
abdomen. These bands will be connected to a monitor that wirelessly transmits readings
of breathing volume and rate. These measurements will allow the investigators to
determine if the participants' exercise workload is sufficient to meet the study's
target minute ventilation rate.
Participants will enter the exposure chamber following the pre-exposure protocol listed
above. While in the chamber, participants will undergo exposure for 2 hours of either clean
filtered air or wood smoke. Participants will receive clean filtered air on one day and wood
smoke on the other day. Subjects will be blinded as to which exposure they receive on each
exposure day. The concentration of wood smoke that used in this study (approximately 500
μg/m^3) is below what someone would be exposed to during biomass burning for heating and food
preparation or in the surrounding area of a forest fire or agricultural burning. Chamber
conditions will be at a comfortable temperature and relative humidity. Participants will
perform mild exercise on a stationary bicycle in the chamber every other 15 minutes
alternating with resting period for a total of 1 hour of exercise per chamber exposure. The
target ventilation rate will be maintained at approximately 12 L/min/m^2 and monitored using
a pneumotach and the BioPac bands. A study coordinator or other trained person will be
observing from outside the chamber at all times. During the exposure, heart rate and oxygen
saturation will be monitored by placing a device (pulse oximeter) on the participants'
finger. If it appears the participant is experiencing significant discomfort, breathing or
heart problems, the exposure will be terminated immediately. In addition, the participant may
elect to terminate the exposure at any time for any reason. Participants who do not complete
the study protocol will be fully compensated that day's session but will be ineligible for
further participation in the study.
Immediately following the exposure, participants will:
1. Fill out a symptom score questionnaire electronically.
2. Have your vital signs checked.
3. Have blood drawn (Approximately 60 mL, about 4 tablespoons).
4. Have a breathing test (spirometry).
5. Recline quietly for 30 minutes while heart rhythm is recorded.
6. Have retinal pictures will be taken.
7. Eat a low-fat lunch brought from home. At this time, the study team will encourage
participants to take a shower in a private shower facility at the HSF to get rid of the
wood smoke odor. Towel, soap, and shampoo will be provided. The participant's belongings
will be securely stored during all visits.
Participants will be assessed and discharged by the study team following the completion of
each exposure day.
Follow up visit (about 4 hours):
Participants will return to the HSF the next morning (approximately 24 hours after exposure)
and will:
1. Have vital signs checked.
2. Recline quietly for 30 minutes while your heart rhythm is recorded. Electrodes will be
removed from the participants' chest at the end of this test.
3. Have blood pressure and heart rate measured.
4. Fill out a symptom score questionnaire electronically.
5. Complete TracMyAir Questionnaire (see below)
6. Have NELF samples collected.
7. Have samples of induced sputum collected.
8. Have a breathing test (spirometry).
9. Have blood drawn (approximately 60 mL) for analysis.
10. Have retinal pictures taken.
TracMyAir is an application that uses data from nearby monitoring stations to report on local
air pollution levels. The study team will use TracMyAir to determine each study participant's
daily (24 hour average) ambient PM2.5 and ozone exposure and inhaled dose. TracMyAir
calculates daily 24 hour average exposure and dose for the previous 4 days, which allows for
a lag analysis. TracMyAir uses EPA's previously developed and evaluated Exposure Model for
Individuals (EMI). The EPA staff will enter input data (shown below) into the TracMyAir
software for each study participant.
If there are any samples left over after all study information is collected, the study team
will continue to store the samples for future undesignated studies given the participant's
consent. This allows the team to make the best use of the samples collected from subjects.
Participants will be given a separate consent form for this storage and do not have to allow
samples to be stored indefinitely in order to participate in this study.