Alveolar Ridge Sequelae Due to Peri-implantitis: a Retrospective Observational Study

Peri-Implantitis Clinical Trial

Official title: "Dimensional Hard Tissue Changes Resulted at Removed Peri-implantitis Implant Sites: A Retrospective Study".

Status Completed

Clinical Trial Summary

The scientific evidence available at present regarding the alterations suffered by the alveolar ridge after the explantation of implants that have been considered to be abandoned due to periimplantitis, as well as the remaining sequelae from said treatment, is scarce and inconclusive. Regarding this background, it is speculated that the different types of peri-implant defects present different bone remodeling and different sequelae after the explantation of the implants affected by peri-implantitis. Thus, it has been hypothesized that the peri-implant defect configuration has an influence on the radiographic bone alterations that occur after explantation. In order to test this hypothesis, a retrospective study has been designed as it follows: Patients who have undergone implant placement procedure and suffer from peri-implantitis will be consecutively included in the study. In addition, patients should present at least 2 CBCTs taken before and after explantation, 4-6 months apart. Linear measurements will be taken in order to assess dimensional changes of the alveolar ridge at 1, 3, 5 and 7 mm from the bone crest.

Clinical Trial Description

Peri-implant diseases have been a growing problem for the last decades. A recent cross-sectional study conducted in the Spanish population has shown a prevalence of mucositis and peri-implantitis at the implant level of 27% and 20%, and of 27% and 18% at the patient level, respectively (Rodrigo et al. 2018). As the peri-implant disease progresses, it has been observed that it generates different types of defects around implants affected by this pathology. Recently, Monje et al. 2019, have classified these defects according to their morphology (infrabony defects, supracrestal/horizontal defects or combined defects) and according to the depth of the defect and total bone loss/total implant length (3-4mm/<25% of implant length, 4-5mm/≥25-50% of implant length, >6mm/>50% of implant length (Monje et al. 2019). Bone remodeling, as well as the sequelae or morphological alterations suffered by the alveolar ridge after tooth extraction have been widely described in the literature (Amler et al. 1960, Evian et al. 1982, Cardaropoli et al. 2003). In an animal model, Araujo and coworkers described the alterations of the alveolar ridge following tooth extraction; observing that bone height reduction of the buccal plate was more pronounced than the lingual, and that vertical bone loss was always associated with horizontal bone loss (Araujo et al. 2005). In contrast, the evidence available nowadays regarding the alterations suffered by the alveolar ridge after the explantation of implants that have been considered to be removed due to peri-implantitis, as well as the remaining sequelae from said treatment, is scarce and inconclusive. Therefore, the the primary objective of this study will be to evaluate radiographically the influence of the peri-implant defect configuration on the radiographic bone alterations after implant explanation. In this sense, a retrospective observational study will be design. The protocol of which will be approved by the Ethics Committee of the University of Extremadura (Badajoz, Spain), and will follow the Declaration of Helsinki on human studies. In addition, this study will be reported in accordance with the Analysis Strenghtening the Reporting of Observational Studies in Epidemiology (STROBE) Statement . Patient recruitment will be obtained from a private practice exclusively dedicated to periodontics and implantology. Edentulous patients, either total or partial, who previously underwent implant placement procedure will be consecutively included in the study. A prerequisite for being eligible for the study was to have at least 2 CBCts, one taken before explantation in order to diagnose peri-implantitis; and the other taken after explantation. In order to define a peri-implantitis case, it will be based on the consensus report of Workgroup 4 of the 2017 World Workshop on the Classification of Periodontal and Peri-implant Diseases and Conditions (Berglundh et al., 2018), in which it was stated that, in the absence of baseline information, the diagnosis of peri-implantitis required: presence of bleeding and/or suppuration on gentle probing, probing depth ≥6 mm and bone level ≥3mm apical to the most coronal portion of the implant or at the rough-smooth interface in transmucosal implants. Once defined, several variables will be recorded, including both patient- and implant-related ones. The former will include age, gender, type of edentulism (total/partial), history of periodontal disease (mild, moderate or severe), tobacco smoking (heavy smoker >10 cigarettes/day; light smoker <10 cigarettes/day, former smoker 0 cigarette/day or non-smoker), numbers of implant per patient, and keratinized mucosa (0, <2 or ≥2 mm). Implant-related variables will include position (mandible / maxilla / anterior / posterior), implant system (brand, diameter, length and type of connection), implant macrodesign (transmucosal/bone level), type of prosthesis (single/multiple; screw/cement-retained), as well as explantation method (trephine, tweezers, forceps or implant removal kit). In addition, whether regeneration was performed or not after explantation will be recorded, as well as the material used for it. For the radiographic assessment, images were acquired by CBCT i-CAT Model 17-19 (Imaging Sciences International LLC, Hatfield, PA, USA). The imaging parameters were set at a width and depth of 16 × 13 mm, 120 kVp, 20.27 mAs, scan time 14.7 seconds, resolution 0.25 voxel and a field of view (FOV), which varied based on the scanned region. Defect morphology and severity were determined using the OnDemand3D software (Cybermed, Seoul, Korea) by one previously calibrated examiner. Prior to the assessment of the different radiographic variables, two reference lines will be established: longitudinal axis of the implant and a perpendicular line to it tangent to a reference point (sinus floor in the maxilla and mandibular base in the mandible). Several parameters will be assessed before and after explantation in each implant, including: bone-to-implant contact (BIC) at 4 sites (mesial, distal, buccal, lingual), defined as the first contact between the bone and the implant surface, assessed from the most coronal part of the intraosseous component of the implant; bone plate thickness (BPT), assessed at buccal and lingual in mm. The reference point will be the bone crest and bone thickness will be recorded at 1, 3, 5 and 7 mm from the crest. In addition, ridge width (RW) will be also recorded at 1, 3, 5 and 7 mm from the bone crest. If there is any discrepancy between buccal and lingual bone crest, the most apical one will be chosen as the reference. In order to assess changes in bone crest height, the distance between the most coronal point of the bone crest (buccal and lingual) and the reference line tangent to a fixed reference point was calculated in mm. BPT and RW at 1, 3, 5 and 7 mm will be also assessed when the implant has been already explanted, recording the months that have passed from the explantation. For the characterization of the peri-implantitis defects, the defect morphology and severity classification by Monje and coworkers will be followed (Monje et al. 2019): - Morphology: - Class I: Infraosseous defect. Class Ia: Buccal dehiscence. Class Ib: 2-3 walls defect. Class Ic: Circumferential defect. - Class II: Supracrestal/horizontal defect. - Class III: Combined defect. Class IIIa: Buccal dehiscence + horizontal bone loss. Class IIIb: 2-3 walls defect + horizontal bone loss. Class IIIc: Circumferential defect + horizontal bone loss. - Severity: based upon the defect depth from the implant neck and ratio of bone loss/total implant length - Grade S: Slight: 3-4 mm/<25% of the implant length - Grade M: Moderate 4-5 mm/ ≥25%-50% of the implant length - Grade A: Advanced: >6 mm/>50% of the implant length Regarding the statistical analysis, the statistical package (SPSS 15.0, SPSS Inc., Chicago, IL, USA, STATISTICS, version 7.1StatSoft, Inc. will be used for this purpose. The Pearson correlation test will be applied for the assessment of confounding factors and Linear regression models based on generalized estimating equations (GEEs) will be used to analyze the differences in the mean values of the post-extraction bone changes during the 2 time phases. This model will consider the correlations of within-subject repeated measures. ;

Related Conditions & MeSH terms

• Bone Remodeling
• Dental Implant
• Peri-Implantitis

• NCT number: NCT04534361
• Study type: Observational
• Source: Universitat Internacional de Catalunya
• Status: Completed
• Start date: August 15, 2020
• Completion date: September 1, 2020